Riding Gear

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

The SEESOFT™ CE-Level 2 back protector insert is designed to absorb variable impacts without compromising on comfort, ventilation or freedom of movement. The highly impact-resistant blend of Nitrille and Polynorbornene rubber results in a memory foam that is multi-impact rated and CE certified to the highest level (EN 1621-2:2003 - level 2).

In the case of severe angular impact, the individual Memory foam layers will shift relative to one another, resulting in impact dispersion over a larger effective surface area, and therefore minimizing the energy that is transmitted to the spine and back.
By applying a multiple-layer concept, REV’IT! has developed a flexible back protector insert that performs consistently in all conditions.

Use the chart below to determine which size back protector you need for your jacket. 

Size 03 - Compatible Jackets:

• Textile jackets size XS
• Ladies' textile jackets sizes 34-36
• Ladies' leather jackets sizes 34-44
• Men's leather jackets sizes 46-48

Size 04 - Compatible Jackets:

• Textile jackets sizes S-M
• Ladies' textile jackets sizes 38-44
• Ladies' leather jackets sizes 46-48
• Men's leather jackets sizes 50-54

Size 05 - Compatible Jackets:

• Textile jackets sizes L-XXL
• Ladies' textile jackets sizes 46-48
• Men's leather jackets sizes 56-58

Size 06 - Compatible Jackets:

• Textile jackets size 3XL (XYL) - 6XL
• Men's leather jackets sizes 60-62

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Extra-ventilated, CE-level 2 back protector for additional rider protection.

The SEESOFT Air is our extra ventilated CE-level 2 back protector insert that is designed to absorb variable impacts without compromising comfort, ventilation, or freedom of movement. By increasing the number and the frequency ventilation holes (there are more holes and they are bigger!) in the back protector insert, body heat and evaporated perspiration can easily escape, helping the rider cool down quicker or to keep things dry when riding in higher temperatures.

The highly impact-resistant blend of Nitrile and Polynorbornene rubber results in a memory foam that is multi-impact rated and CE certified to the highest level. In the case of severe angular impact, the individual memory foam layers will shift relative to one another, resulting in impact dispersion over a larger effective surface area, and therefore minimizing the energy that is transmitted to the spine and back. By applying a multiple-layer concept, REV’IT! has developed a flexible back protector insert that performs consistently in all conditions.

Use the chart below to determine which size back protector you need for your jacket. 

Size 03 - Compatible Jackets:

• Textile jackets size XS
• Ladies' textile jackets sizes 34-36
• Ladies' leather jackets sizes 34-44
• Men's leather jackets sizes 46-48

Size 04 - Compatible Jackets:

• Textile jackets sizes S-M
• Ladies' textile jackets sizes 38-44
• Ladies' leather jackets sizes 46-48
• Men's leather jackets sizes 50-54

Size 05 - Compatible Jackets:

• Textile jackets sizes L-XXL
• Ladies' textile jackets sizes 46-48
• Men's leather jackets sizes 56-58

Size 06 - Compatible Jackets:

• Textile jackets size 3XL (XYL) - 6XL
• Men's leather jackets sizes 60-62

Shopping for someone else but not sure what to give them? Give them the gift of choice with a Strath Moto gift card.

Gift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees. You can redeem them online by entering the code received at checkout. Alternatively, they can also be redeemed in-store - just present your gift card to us at time of purchase. Easy peasy.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Internal protectors have been the one limiting aspect that is constant across all motorcycling segments. 

The SEESMART™ concept changes everything. SEESMART™ with outer shell technologies has increasingly enabled REV'IT to create stylish yet abrasion resistant riding gear.  Specifically developed for use in motorcycle gear, SEESMART™ offers the highest level of flexibility while passing the EN1621-1:2012 CE-Level 1 impact tests, also in hot (T+) conditions. This product is delivered as a set of 2 protectors (left and right).

Slide your hands into a pair of Fuel’s Rodeo gloves. The Rodeo brown gloves are made from 100% cowhide leather and are double-stitched for extra strength. Protect your most important assets!

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, leather/textile mix, ventilated off-road gloves

The Caliber gloves (as part of the DIRT Series collection) feel perfectly at home on or off-road. Why? Because this snug-fitting pair of hand protectors combine the best of both leather and mesh. In order to keep your hands safe, these CE-certified gloves incorporate PWR|Shield fabric at the palm for maximum abrasion resistance. The top of the gloves are constructed with well-ventilated PWR|Stretch mesh and flexible TPR protection is found on the fingers and knuckles. This combination – along with stretch in all the right places - provides optimal freedom of movement and the armor necessary to keep your hands safe whether riding on the asphalt or exploring off the beaten path. Additionally, the comfortable neoprene cuff will keep dust and water out of the gloves.

Adjustability

• Stretch at fingers
• Stretch at thumb
• Stretch fabric on back of hand

Closure

• Hook-and-loop closure
• Wrist strap

Lining

• Tri-fleece liner: This polyester tricot fabric is used for glove lining, and brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp.

Features

• Connect Finger Tip: Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
• Grip patch at palm: A grip patch is made with a texturized pattern to deliver a superb grip performance.
• Outside stitching: The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.
• Pull tab: Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
• Regular cuff

• Ventilation: Ventilation holes

Protection

• Injected ventilated flex knuckle: This knuckle protection is injected in the upper material which makes it very flexible and abrasion resistant. Due to its structure it ventilates very well while keeping you safe.
• Outseam stitching by Guterman: Marketing calls it PWR yarn
• PWR|Shield at palm: PWR|Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance levels. This product is equipped with PWR|Shield at the palm.
• Temperfoam® knuckle
• Temperfoam® palm slider
• Temperfoam® thumb knuckle
• TPR finger knuckles

Outer shell material

• Connect finger tip fabric: Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
• Corduroy
• Goatskin: Tanned leather made from goatskin is considered extremely durable, and is often used for gloves and other products that require a soft hide.
• Neoprene: Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.
• PWR|Stretch mesh

Certification

• These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating. For more details about certification click here.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Stripped-down, no-nonsense, lightweight over-the-jacket rain jacket for all riders.

Year-round riding means that, chances are, at some point you’ll end up riding in the rain. The Cyclone 3 H2O could be your 'day saver.’ This ultra-lightweight rain jacket with comes with our hydratex |Lite outer shell and is 100% waterproof. It easily fits over any riding jacket in case you find yourself caught in a downpour. You can adjust it to have a more tailored fit to your body thanks to the adjustment straps on the arms and wrists.

Laminated reflection is found on the upper arms, as well as the shield logos at chest and back to make sure you are visible even in the most adverse conditions – whether that’s in the dark of the night or in a storm. Thanks to its compact profile, it folds neatly into its own carrying package for transportation when not in use.

Don’t leave home without a back-up plan, the Cyclone 3 H2O rain jacket will keep you dry and comfortable in case of bad weather.

Our short armoured motorcycle gloves are a truly unique pair of gloves, combining the luxury of silk with the durability of leather, resulting in a tighter fitting pair of gloves designed for ultimate comfort and protection when riding.  

A hybrid half-silk, half-unlined internal design ensures that these gloves keep you cool on hotter days without becoming sticky and uncomfortable on longer rides, thanks to the addition of beautiful silk between the back of your hand and the glove itself. 

Protection is provided through a comfort-driven "floating" armoured knuckle, gel padded fingers and a reinforced palm and finger/thumb area, and with double stitching at all major stress points. These gloves are built to last, whilst your fit is secured in place whilst riding thanks to a ribbed, wrap-around velcro strap. Perforations, in addition to the silk lining, keep you cool, making these perfect for hot weather, Summer riding on or off-road!

Supplement your gloves with some of our Water Repellent Ducks Wax to help preserve and maintain these gloves, whilst keeping most of the water out, but with these being perforated gloves....it sure won't keep it all out!

PRODUCT INFO

• 1.0 mm hand-waxed Aniline cowhide leather
• Single hide palm and perforated rear styling and no split fingers!
• Floating knuckle design for ultimate comfort on longer journeys
• Hybrid unlined palm with a 100% silk lined upper section
• Reinforced lower palm and finger/thumb
• Ribbed velcro fastening
• 5 strand cotton thread stitching throughout

Return of the Cafe Racers X Goldtop Collaboration

Goldtop's armoured Predator motorcycle gloves are their most protective motorcycle gloves to date. Combining the luxury of silk, the durability of leather, and the protection of Knox Microlock armour, these gloves provide for the ultimate combination of both comfort and protection when riding. 

A hybrid half-silk, half-unlined internal design ensures that these gloves keep you cool on hotter days without becoming sticky and uncomfortable on longer rides, thanks to the addition of beautiful silk between the back of your hand and the glove itself. 

Protection is provided through a comfort-driven "floating" armoured knuckle, gel-padded fingers and a double reinforced palm and finger/thumb area, with triple stitching at all major stress points. By incorporating Knox Microlock armour in all major impact zones, these gloves are built to last. The gloves are secured in place whilst riding thanks to a ribbed, wrap-around velcro strap. Perforations, in addition to the silk lining, keep you cool, making these perfect for hot summer weather,  riding on or off-road!

Supplement your gloves with some Goldtop Water Repellent Balm in order to give these gloves a darker, richer look and feel. The Water Repellent Balm will also help preserve and maintain these gloves, whilst keeping most of the water out, but with these being perforated gloves....it sure won't keep it all out! 

PRODUCT INFO

Fits stock 3-snap visor configuration on most helmets. Accept no substitutes: make sure the next bubble shield you own features the "Biltwell" script logo.

Fits most helmets having 3 button snaps, including Biltwell Gringo, Biltwell Bonanza, Bell Custom 500, and DMD Vintage Helmets. 

Can be flipped-up when combined with the aluminium or plastic flip-up mechanism

Does NOT fit Biltwell Gringo S or SV!

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Stripped-down, no-nonsense, lightweight over-the-pants rain trousers for all riders.

Shield yourself from bad weather with the Acid 3 H2O rain trousers. They’re an affordable, waterproof layer to wear over your protective motorcycle pants. The hydratex|Lite outer shell is breathable, lightweight and waterproof, making them a perfect travel companion. The Acid 3 H2O rain trousers are easy to slip on (or take off), even over textile or leather trousers, thanks to a non-stick, inside coating.

The elasticized waistband and hook-and-loop on the lower legs will ensure a good fit to your body. Laminated reflection is found at the lower legs to help ensure visibility in bad weather or at night. Furthermore, it comes with its own carry bag for easy transport and storage.

Don't let rain ruin your day! Make sure you arrive dry and comfortable with the Acid 3 H2O rain trousers.

Technical specifications

• 100% Cowhide construction for excellent abrasion resistance.
• Integrated PVC knuckle armor for protection against crash
• Anatomically contoured suede palm panels for abrasion resistance
• Warm Antibacterial and Soft Polyester Microfiber lining
• Stitched accordion baffles on index and middle fingers for added flexibility
• Adjustable wrist opening with embossed leather closure and elastic gathers
• Raised welt detailing on leather backs
• CE Certified

The non-perforated Rodeo gloves have a comfort liner, therefore the finger length is slightly shorter than other Fuel gloves. Please consider sizing up if you have longer than average fingers.

How to measure for size: https://vimeo.com/472177948

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Keep your trousers in the right place with the Strapper suspenders. The Strapper can be connected to the short connection zipper at the back and the special made Velcro attachment point on the front side. The suspenders are compatible with this selection of trousers from the REV'IT! collection:

• Trousers Factor 3
• Trousers Factor 3 Ladies
• Trousers Cayenne Pro
• Trousers Defender Pro GTX
• Trousers Dominator GTX
• Trousers Sand 3
• Trousers Horizon 2
• Trousers Horizon 2 Ladies
• Trousers Dominator 2 GTX
• Trousers Neptune GTX Ladies
• Trousers Tornado 2
• Trousers Tornado 2 Ladies
• Trousers Outback                                                                                              
• Outback Ladies
• Airwave 2
• Airwave 2 Ladies
• Enterprise 2
• Trousers Enterprise 2 Ladies
• Trousers Ignition 3
• Trousers Ignition 3 Ladies
• Trousers Neptune 2 GTX
• Trousers Globe GTX
• Trousers Poseidon 2 GTX

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight, breathable protector underjacket/jersey jacket

REV'ITs lightweight & breathable Proteus protector jacket functions as an upgrade for the DIRT Series collection, which is worn under the jersey or various jackets we offer. Ideal stretch, ventilation, & armor allow you to ride protected on the trails less travelled. It’s constructed with a combination of densely woven Hicom mesh on the shoulders, a 2-way spandex mesh body, and PWR|Stretch mesh on the inner area of the sleeves. This combination provides optimal support, airflow, and flexibility. Furthermore, it features our award-winning SEEFLEX™ CE-level 2 protection at the shoulders and elbows. It is also equipped with a SEESOFT™ CE-level 2 back protector and SEESOFT™ CE-level 1 protectors at the chest. Thumb loops at the cuffs along with the stretch cuff will make sure the sleeves won’t slide when you’re putting it on or during riding.

Lining: 3D mesh
Features

• Integrated kidney belt
• Stretchable cuff
• Stretch at back
• Stretch at front
• Stretch at inside arms
• Thumb loops
• Outer shell material: Mesh/Stretch mesh

Protection

• 3D mesh protector pockets
• SEEFLEX™ CE-level 2 Elbow Protectors: Certified CE-Level 2 according to the new norm EN1621-1:2012 the SEEFLEX™ protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX™ protectors easily surpass the new norm without sacrificing wearer comfort.
• SEEFLEX™ CE-level 2 Shoulder Protectors: Certified CE-Level 2 according to the new norm EN1621-1:2012 the SEEFLEX™ protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX™ protectors easily surpass the new norm without sacrificing wearer comfort.
• SEESOFT™ at ribcage
• SEESOFT™ CE-level 1 Divided Chest Protectors
• SEESOFT™ CE-level 2 Back Protector: The SEESOFT™ CE-Level 2 back protector insert is designed to absorb variable impacts without compromising on comfort, ventilation or freedom of movement.

Certification

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved CU rating. For more details about certification click here.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada. 

A Slim Fit pair of protective riding jeans for the urban playground.

Without going too much into detail, the Reed SF motorcycle jeans have AAA-level CE certification, which means they’re more than ready to take you for a ride safely. Wearing this pair of jeans not only gives peace of mind but they’re also spot on when it comes to fashion trends. These jeans have a dark blue rinse and therefore they will go well with almost any type of motorcycle jacket.

The inside is finished with a light blue fabric to create the authentic denim feeling. Depending on your style, you can choose a more sportive style and wear sneakers, or wear a pair of sturdy boots if you prefer a more classic look. The fabric we used is a unique single-layer denim combined with a new PWR|Shield fabric that’s lighter and feels cooler against the legs, the only material on the market that offers the highest level of protection.

We understand that not everyone has the same leg length, so the included knee protection pocket is adjustable in two different heights. These motorcycle jeans come in two color versions: rinsed with 3D crinkles and a medium blue used.

Take on the town with the Reed SF motorcycle jeans. Top level certification with a fashion flare. Who could ask for more?

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Protective, everyday, Regular Fit jeans that echo your fashion sense.

We updated the level of stretch in the Lombard 3 RF motorcycle jeans to preserve the high level of comfort you experience when you wear them. The protection is there, but it will remain virtually unnoticed when you’re riding, regardless of your riding position.

The stretch ensures that the jeans don’t wrinkle when you get off. These features make the Lombard 3 your ideal partner on a day that you’re riding, but also when you want to look like you’re not wearing motorcycle gear off your bike.

A blue or black wash is available. Regardless of the hue, riders can’t lose! They can be worn with almost everything. The included knee protector pockets are adjustable to two different heights, in order to have your armor at the correct place regardless of your leg length.

Dress them up, or dress them down. The Lombard 3 RF motorcycle jeans are a perfect everyday pair of riding denim for the versatile urbanite.

Our short armoured motorcycle gloves are a truly unique pair of gloves, combining the luxury of silk with the durability of leather, resulting in a tighter fitting pair of gloves designed for ultimate comfort and protection when riding.  

A hybrid half-silk, half-unlined internal design ensures that these gloves keep you cool on hotter days without becoming sticky and uncomfortable on longer rides, thanks to the addition of beautiful silk between the back of your hand and the glove itself. 

Protection is provided through a comfort-driven "floating" armoured knuckle, gel padded fingers and a reinforced palm and finger/thumb area, and with double stitching at all major stress points. These gloves are built to last, whilst your fit is secured in place whilst riding thanks to a ribbed, wrap-around velcro strap. Perforations, in addition to the silk lining, keep you cool, making these perfect for hot weather, Summer riding on or off-road!

Supplement your gloves with some of our Water Repellent Balm to help preserve and maintain these gloves, whilst keeping most of the water out, but with these being perforated gloves....it sure won't keep it all out!

PRODUCT INFO

• 1.0 mm hand-waxed Aniline cowhide leather
• Single hide palm and perforated rear styling and no split fingers!
• Floating knuckle design for ultimate comfort on longer journeys
• Hybrid unlined palm with a 100% silk lined upper section
• Reinforced lower palm and finger/thumb
• Ribbed velcro fastening
• 5 strand cotton thread stitching throughout

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Protective, Loose Fit jeans with a classic design language. Perfect for the urban rider.

The Philly 3 LF are the loosest-fitting motorcycle jeans in our range and are only for those who like to spend their days on the bike as if they were having a chill day on the couch on a Sunday afternoon.

We’ve taken the challenge to design a pair of riding denim that approaches your everyday jeans but made motorcycle ready. Although they're loose, you don’t have to worry about the protection not being in place, because we took care of that. The included knee protector pockets are adjustable to two different heights, in order to have your armor at the correct place regardless of your leg length. They come in dark or a medium blue wash, so there’s always a pair that will fit your wardrobe. Don’t mistake them for baggy jeans, as their fit is mainly offered to add maximum comfort to your ride.

Enjoy the benefits of freedom as well as peace of mind while riding with the Philly 3 LF motorcycle jeans.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

The Sand 4 H2O are an incredibly versatile pair of riding pants that will enable the most adventurous riders out there to explore the best roads and trails of the world on two wheels, in any environment, in any season. The Sand 4 H2O pants sport the same Swiss Army Knife-like versatility as the jacket when it comes to features. From the outside in, you will find a highly abrasion-resistant but lightweight outer shell equipped with height adjustable SEEFLEX™ CE-level 2 knee and CE-level 1 SEESMART™ hip protectors. Underneath the rugged outer shell, there’s the detachable, breathable waterproof hydratex® liner that will keep you comfortable and dry in wet conditions. To top it all off - and allow you to challenge colder conditions - we also installed a snug removable thermal liner. With both liners removed, you can direct air to your legs by opening the VCS zippers located next to the waterproof stash pockets, which provide plenty of storage space for your essentials. Zippers on the pockets make sure that your possessions stay where they should be. Adjustment straps on hips ensure a perfect fit to your body with or without liners installed. The adjustment straps and tabs on the calves and ankles make sure the fit can be adjusted to use the pants with any type of motorcycle boot. Thanks to the grip panel around back, the Sand 4 H2O pants prevent you from sliding on the seat under acceleration or braking. Laminated reflection on the calves ensures you remain visible in the dark. Go further.

Adjustability

• Adjustment strap at calves
• Adjustment strap at lower leg
• Adjustment strap at waist
• Adjustment tab at ankle

Storage

• Slit pocket at hip
• Waterproof stash pocket on upper leg

Features

• B-lock button closure at front
• Calf zippers
• Grip panel at seat: The grip panel at the seat ensures you stay in control in all weather conditions and won't slide in your seat at any time. A key feature for any rider, pillion passengers will also appreciate this extra level of performance.
• Long connection zipper
• Short connection zipper
• Stretch at back
• Stretch at waist

HJC HJ-41 Visor Fits V10

Replacement HJ-41 visor suitable for V10 helmets.

Key Features

• Pinlock® ready HJ-41 visor: provides 99% UV protection, anti-scratch coated. Note: Pinlock ready refers to the shield's ability to accept a Pinlock. Pinlocks are sold separately.
• Quick release visor mechanism

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Classic style, Skinny Fit riding denim to match your urban rides

Meet the Jackson 2 SK motorcycle jeans. Like any other model in our extensive lineup of technical riding denim, they are 100% ride-ready. This 13 oz. CORDURA® DENIM with a black wash can be combined with any color and type of jacket, hoody, or sweater you feel like wearing.

Because of the amazing stretch properties, these jeans provide the flexibility and comfort to go on longer rides, yet also provide the look you’re after when off the bike. To keep you safe and looking good, we were able to maintain a sleek and slender silhouette by incorporating our ultra-thin and flexible knee protectors, that you can adjust in two different heights to get the perfect fit.

Go ahead and ride. Your style will join you with the Jackson 2 SK motorcycle jeans.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Waterproof, classic moto sneakers to ride & walk all day long in

Hydratex®|Sphere waterproofing

Sneakers you can ride in the rain with!

OrthoLite® insole for optimal comfort

Reflection at heel for better visibility

Meet the Delta H2O shoes, made for motorcycle-loving sneakerheads who don’t accept rain as an excuse not to ride. Disguised to look and feel like your everyday footwear, the Delta H2O is a full-on, CE-certified motorcycle product that not only offers protection against the road in case of any misfortune, but also against the elements thanks to an incorporated waterproof and breathable hydratex® membrane. Thermoformed heel and toe cups combined with injected ankle cups form the protective backbone of these shoes. They are then combined with the OrthoLite® insole to ensure comfort on and off the bike. Rain or shine.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Softshell, waterproof urban gloves with a minimalist design

Some products are so versatile they’re hard to pin down into one particular segment, as is the case with the Cassini H2O gloves. These short-cuffed, softshell, waterproof hand protectors are the go-to gloves for those looking for something that delivers the right amount of protection and comfort for everyday use, even when the rain is pouring down. A hard shell knuckle protector takes care of impact protection in case of any unfortunate mishap, as does the abrasion-resistant outer shell that has undergone extensive testing to ensure safety is up to spec. Thanks to mcFIT technology, these hydratex®-equipped waterproof and breathable gloves do not compromise on comfort, making sure they deliver the right fit and feel from the get-go. The Connect Finger Tip also allows you to operate touchscreens without the removal of your gloves.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada

Protective, worker-inspired pants for the fashionable urban rider.

In the current fashion market, denim brands are again widely adopting colored pants. The Davis TF motorcycle jeans are easy to combine with different kinds of jackets (whether textile or leather) and complete your look if you’re in the market for something more diverse and interesting.

These pants have nice details, for example, square pocketing, knee patches, and stitched pockets on the waistline. So you’ll have the archetype elements from the past, but with a fit that follows today’s fashion.

Stand out and wear your style with pride with the Davis TF motorcycle jeans

Description

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Inspired by your everyday sneakers

Partially ventilated so feet stay happy

OrthoLite® insole for optimal comfort

Reflection at heel for better visibility

The cord-laced Arrow shoes combine the look and feel of your everyday sneaker with the protection that is constant across our extensive lineup of motorcycle-ready urban footwear. Thermoformed heel and toe cups are combined with an injected ankle cup to ensure safety is compliant with CE requirements. Our partnership with OrthoLite® solidifies the comfort felt with every step you take. Staying true to our Tailored Technology credo, these partially ventilated sneakers will soon become your next favorite pair of shoes, whether you’re planning on riding or not. A subtle strip of reflection at the heel of the Arrow shoes make sure you’re not only noticed during daytime, but that you also stand out when the sun goes down.

Goldtop's short bobber motorcycle gloves are designed for ultimate comfort when riding. With a reinforced palm and finger/thumb area, these gloves are built to last, and come with a quilted leather velcro wrist fastening to safely secure your fit. This quilting, plus other perforated and ribbed stylings ensures that these gloves provide that classic yet modern cafe racer look. Lined with traditional red fleece, these gloves are perfect for warm weather riding from spring through summer and autumn too!

The Water Repellent Ducks Wax will help preserve and maintain this glove, whilst keeping most of the water out, but with these being perforated gloves intended for warmer weather riding....it won't keep it all out!

See the review here: https://youtu.be/f3wugv6mqSw

PRODUCT INFO

• 1.2mm Aniline cowhide leather
• Single hide palm and perforated rear styling and no split fingers!
• Traditional red fleece lining
• Reinforced lower palm and finger/thumb
• Quilted velcro fastening
• 5 strand cotton thread stitching throughout

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Skinny Fit, protective jeans tailored to the urban riding experience.

We use 12.5 oz. CORDURA® DENIM coupled with medium blue wash so they can be combined with almost any color and type of jacket, hoody, or sweater you feel like wearing. Finish with a pair of riding sneakers and you’re good to go. You can wear these on days where you are hopping on and off continually, without changing all the time.

The Carlin SK motorcycle jeans are just that versatile. Go ahead, take them for a spin

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada

Protective riding chinos for the fashionable urban rider.

Comfort is an important feature no matter what you’re wearing so we added the Dean SF to our riding motorcycle trousers collection. We took all the characteristics of a normal chino (including a slim fit) and developed this into 100% motorcycle-ready pair of pants. Pants that you’ll enjoy wearing even if you don’t throw your leg over a bike.

Don’t be deceived by their casual looks though, these trousers are made out of our signature CORDURA® fabric. They offer unsurpassed tear and abrasion resistance to help keep you safe on the road. The inside of the leg also has blue reflective tape; adding a nice touch of detail to your look. They come in a lighter or darker neutral color so they can easily be combined with almost any item from your wardrobe.

Stylish chinos plus motorcycle-ready protection = the Dean SF motorcycle trousers.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Short-cuffed, lightweight and ventilated adventure riding gloves with hard knuckle

For serious touring and adventure riders

Loaded with safety technology

Perfect balance of protection and ventilation

Connect Finger Tip for touchscreen operation

Our Dirt 3 gloves have been created to meet the serious demands of touring and adventure riders across the globe. We’ve made sure they combine the ideal balance of protection and ventilation, whether you’re on or off-road. In terms of protection, these gloves keep hands well armored thanks to the inclusion of a TPR hard shell knuckle, a TPR palm slider, TPR finger knuckles, PWR|shield knit at the palm, Temperfoam® finger knuckles, a Temperfoam® thumb knuckle and Temperfoam® underneath the knuckle. Furthermore, ventialtion panels are found at the fingers, thumb and back of the hand. To keep things functional, we’ve included the Connect Finger Tip, a feature that allows riders to operate touchscreens (GPS, smartphones, etc.) without the inconvenience of taking the gloves off. And to make sure you have the perfect fit, the adjustment tab at the cuff is there for your comfort and convenience.

The V10 goes beyond the vintage look with new-age features such as a lightweight fiberglass shell, aerodynamic performance, emergency tabs for extra safety, detachable and washable interior, and easy bolts for a quick visor replacement. This helmet is Bluetooth compatible with Smart HJC.

INCLUDED IN THE BOX

• PINLOCK DKS476
• * V10 does not come with a smoke shield included in the box. If you'd like to purchase an accessory shield please click here.

VISOR

• HJ-41 ANTI-FOG PINLOCK® READY VISOR
• HJ-41 MIRRORED ANTI-FOG PINLOCK® READY VISOR

REPLACEMENT PARTS

• PEAK VISOR
• CHIN CURTAIN
• CHEEK PADS
• HEADLINER

LOCKING SYSTEM

• DOUBLE-D RING

FIBERGLASS SHELL

The Advanced Fiberglass Composite Shell is designed to be lightweight with a superior fit and comfort, using CAD technology.

STANDARD DOT & STANDARD ECE 22.06

Meets or exceeds ECE 22.06 approved. Testing includes energy attenuation, penetration resistance, chin strap structural integrity and labeling requirements for on-road motorcycle helmets 

Meets or exceeds DOT FMVSS 218 approved.

Testing includes energy attenuation, penetration resistance, chin strap structural integrity, and labeling requirements for on-road motorcycle helmets

HJC EASY BOLT

Quick visor replacement with safe and easy visor screws that do not require tools.

SMART HJC

SMART HJC 20B and 10B Bluetooth communication system co-developed with SENA tailored specially for HJC helmets. SMART HJC can be installed on HJC's various models and due to the compact size and aerodynamic design of the Bluetooth unit, it enhances the overall look and aerodynamic design of the shell.

*All SMART HJC devices are sold separately. If you'd like to purchase the Smart HJC 20B comm unit for your HJC V10 helmet, please click here.

3 YEAR WARRANTY

The warranty is applicable to manufacturers' defects for up to 3 years from the date of purchase or 5 years from the date of manufacturing (whichever comes first).

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

The Sand 4 H2O gloves are the go-to gloves for the rider that doesn’t let grey skies and the possibility of rain get in the way of his riding plans. These gloves have been engineered specifically for riding on or off-road during unstable weather conditions in spring, summer or fall. Their foundation is based on the iconic Sand 4 gloves but the design team traded in ventilation for waterproofing. They did that by incorporating a waterproof and breathable Hydratex® Z-liner. The gloves offer almost the same high level of dexterity and feel on the grips and levers as the Sand 4 gloves all while keeping your hands comfortable and dry during the whole ride. Stretch material is used on the top of the glove to increase flexibility and freedom of movement on the controls of your bike. They also feature a new TPR knuckle protector, designed especially for these gloves. Additional protection is provided by TPR sliders on the fingers, thumb and palm. Thanks to the rugged pull tab on the cuff, slipping on these gloves is a breeze and you can secure them in place with the hook-and-loop closure followed by the hook-and-loop wrist strap. We added extra reflective elements on the gloves for increased visibility during inclement weather conditions or nighttime riding. If you want to adjust your route during your journey, the integrated Connect Finger Tip makes sure you can control your touchscreen device with the gloves on. Ride on in the rain.

Features

Connect Finger Tip
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.

Grip panel at palm
This part at the inside of the knees gives you extra grip for ultimate control in the corners. It also protects the leather from wear and tear.

Pull tab
Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone

Regular cuff

Visor wiper
The material used on the index finger of the glove has a visor wipe function. It helps clear water or moisture off the visor for better visibility when riding in wet weather.

 NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Mesh textile summer jacket for urban riding

Summers seem to last longer in the city. Hotter days and warmer nights demand a riding essential – a lightweight jacket that cools you down. But the Eclipse 2 jacket doesn’t only optimize airflow. Beneath strategically placed polyester mesh panels, there’s SEESMART armor with CE-rated protection that you can rely on. Plus, plenty of practical touches for your daily trips around town like the zipped pockets, a wind catcher behind the front zipper, and a jeans loop – all the season’s essentials. Cooler for commuters winding your way to work in rush hour, you’ll appreciate the breathable mesh panels at the front, the back, and the inner arms that send a current of air around your entire body. An abrasion-resistant 600-denier polyester construction adds a sense of secure comfort, plus you can customize the fit with tabs at the waist, cuffs, and bicep. Pump up the protection Eclipse 2 has evolved. Now there's SEESMART CE-Level 1 armor at the elbows and shoulders. You can up your level even higher with the SEESOFT CE-Level 2 back protector to offer inconspicuous yet highly effective impact resistance. So, when you’re whizzing about town you can feel pumped about protection, not weighed down by it.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

In terms of pure style, nothing says "motocross" like a classic 3-snap visor. Tapered sides flow smoothly into the helmet for a look that would make Steve McQueen jealous. 

Fits most helmets having 3 button snaps, including Biltwell Gringo, Biltwell Bonanza, Bell Custom 500, DMD Vintage, and DMD SeventyFive Helmets.

Replacement shields for Lane Splitter helmets are injection molded with highly scratch- and impact-resistant polycarbonate thermoplastic. Our latest Gen-2 shields fit all Lane Splitter models because they ship with an all-new baseplate kit. These baseplates have an improved mechanism that results in firmer detents for three open positions. Anti-fog treatment included for maximum optical clarity.

Technical Details

• Injection-molded scratch- and impact-resistant polycarbonate thermoplastic construction
• Colored shields feature in-mold tint technology
• Mirrored shields feature reflective coating in a variety of surface finishes to reduce glare
• Every shield color and style provides 91% UV/A and 99% AV/B light resistance based on AATCC-138 test standard
• Anti-fog treatment on shield interior fights moisture build-up from breathing and humidity

Care and Maintenance

To clean your shield, use mild soapy water solution and a microfiber cloth to loosen bugs and road debris, then dry it with a second clean microfiber towel. Never use harsh household or petroleum-based chemicals to clean your bubble shield, especially on the inside, as they can destroy the shield's special coatings. Apply one drop of medium-strength blue Loc-Tite to the threads of both hinge screws every time you install a shield.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Legging-inspired, motorcycle-ready, female-specific riding trousers.

The Ellison SK motorcycle trousers are stretchy leggings created for a figure-hugging fit that will look good on various body types. They will give you all the freedom to move around both on and off the bike, and keep your personal style at the forefront.

These leggings can be worn the way you like to wear your normal leggings when you’re not riding. In fact, we believe that these will be your new favourite pair! We tried to keep them as feminine as possible so there is no zipper but an elastic band high on the waist.

The front pockets are fake so they don’t distort the shape of your upper leg. Your fellow riders will be amazed if you tell them these are not jeans, but in fact leggings with a lot of incorporated protection to keep you safe.

Go ahead and slip into a pair of Ellision SK (skinny fit) motorcycle trousers. Then take them out for a spin around town.

NOTE: these do NOT fit the new ECE 22.06 Gringo S helmets. These are for the ECE 22.05 helmets only.

Replacement shields for Gringo S helmets are injection molded with highly scratch- and impact-resistant polycarbonate thermoplastic. Our latest Gen-2 shields fit all Gringo S models because they ship with an all-new baseplate kit. These baseplates have an improved mechanism that results in firmer detents for three open positions. Anti-fog treatment included for maximum optical clarity.

Technical Details

• Injection-molded scratch- and impact-resistant polycarbonate thermoplastic construction
• Nickel-plated stainless-steel snap on shield fastens securely to snap on helmet shell
• Colored shields feature in-mold tint technology
• Mirrored shields feature reflective coating in a variety of surface finishes to reduce glare
• Every shield color and style provides 91% UV/A and 99% AV/B light resistance based on AATCC-138 test standard
• Anti-fog treatment on shield interior fights moisture build-up from breathing and humidity

Care and Maintenance

To clean your shield, use mild soapy water solution and a microfiber cloth to loosen bugs and road debris, then dry it with a second clean microfiber towel. Never use harsh household or petroleum-based chemicals to clean your shield, especially on the inside, as they can destroy the shield's special coatings. If the retainer snap on your Gringo S shield becomes tight or sticky, apply one drop of general-purpose light household oil to the inside. Apply one drop of medium-strength blue Loc-Tite to the threads of both hinge screws every time you install a shield.

Our ECE-certified Gringo S boasts fit, finish and safety technology identical to its full-face sibling, but features a CE-certified flip-up face shield for added safety and riding comfort.

Technical Details

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy from frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
• Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow 
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components

• Back in real goatskin leather, with fingers and wrist in technical windbreaker fabric
• Elasticized flap on the back for greater comfort when riding
• Real leather flaps on the fingers
• Soft protection in D3O® on the knuckles
• Soft inserts on the phalanx
• Micro-injected logo below the knuckles
• Palm in real chamois leather, with goatskin leather inserts
• Outside in real perforated leather, with reflective bottom for better visibility
• HYDROSCUD®: 100% waterproof and breathable inner membrane
• Special coupling of the membrane to the palm for maximum grip
• Flexible anti-abrasion insert, in micro-injected rubber, on the palm
• Silicone print on the cuff
• Micro-injection strap, with velcro adjustment on the cuff:
  • Double closure tightening strap on the wrist
  • Leather strap, velcro adjustment. Elastic system so you can remove the glove quickly without opening the strap
  • Micro-injection strap, with velcro adjustment on the cuff
• Real leather contrasting inserts on the cuff
• Touch screen compatibility
• EN 13594:2016-CE motorcycle certified

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Modern heritage boots with GTX membrane

Copperhead GTX are high-performance both on and off your motorcycle – you’ll look and feel the part in these eight-hole, high-cut, lace-up boots. Bold, contemporary outdoor styling blended with classic leather craftsmanship set performance standards only the latest technical materials can achieve. Boots with balance Copperhead GTX boots blend technical performance and rugged design to give them a light, airy feel. The body of the boot is suede leather – meticulously oiled and waxed for longevity and ease of breaking in. For all-round airflow to the ankle, there are PWR|Mesh panels on both sides of the upper ankle, while a GORE-TEX membrane ensures waterproof breathability. Comfort that weighs less The Vibram® rubber outsole and Ortholite® insoles cosset your feet to dial up the comfort, and adding only 90 grams per boot, they’re also ever so nimble. At every twist, turn, gear change, and braking maneuver, you can grip the pedals with confidence, and for added reassurance, there’s CE-rated SEESOFT ankle disc protection and a reinforced toe cap.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to the USA.

A ventilated overshirt for hot summer rides in the concrete jungle.

The Tracer Air 2 combines all the functionality of a mesh jacket yet is engineered in the style of our popular overshirts. A full mesh outer shell allows for optimal airflow, helping to cool the body down on those hot day/summer rides. Extensive development has led this overshirt to look like streetwear fashion material.

But take a closer look and it reveals its open structure that allows air to reach the upper body. The Tracer Air 2 sports our ultra-thin and flexible protectors at the shoulders and elbows, and this overshirt can easily be upgraded with our back protector insert.

Offered in black, brown, and camo means the Tracer Air 2 facilitates the right style for everyone in need of that perfect summer product to throw on for a ride.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

MODERN CLASSIC

The Bullitt is an iconic product, a helmet rooted in a storied past mixed with a style and design that could best be described as "retro-future." Inspired by the legendary Bell Star helmets of the '60s and '70s but speaking a modern design language, the Bullitt became an instant classic the moment it hit the streets. We use only the highest-quality ingredients, right down to the last stitch of its genuine leather interior, to create this functional work of art. Available in fiberglass composite and featuring many shield options to further customize this one-of-a-kind helmet. No matter what, how, or where you ride, the Bullitt is in a class by itself. Includes Clear faceshield.

Fixings to keep your Nexx X.WED2 helmet's peak in place.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Stripped-down, no-nonsense, lightweight over-the-pants rain trousers for all riders.

Shield yourself from bad weather with the Acid 3 H2O rain trousers. They’re an affordable, waterproof layer to wear over your protective motorcycle pants. The hydratex|Lite outer shell is breathable, lightweight and waterproof, making them a perfect travel companion. The Acid 3 H2O rain trousers are easy to slip on (or take off), even over textile or leather trousers, thanks to a non-stick, inside coating.

The elasticized waistband and hook-and-loop on the lower legs will ensure a good fit to your body. Laminated reflection is found at the lower legs to help ensure visibility in bad weather or at night. Furthermore, it comes with its own carry bag for easy transport and storage.

Don't let rain ruin your day! Make sure you arrive dry and comfortable with the Acid 3 H2O rain trousers.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Skinny Fit, regular waist, protective jeans for the fashionable urban female rider.

For the Marley Ladies SK motorcycle jeans, we managed to keep a sleek and slender silhouette without compromising safety features. Wearing this pair of riding denim will likely confuse onlookers. They’ll be wondering whether you’re in streetwear or fashionable protective clothing. The answer is the latter!

The stretch material offers flexibility and makes them comfortable when going on longer rides. Furthermore, these skinny jeans are style-centric and very rich when it comes to details. They’re considered to be the “skinniest” Skinny Fit motorcycle jeans that we offer in our women’s denim lineup.

The Marley Ladies comes in a medium blue wash and can be combined with a plethora of different colored shoes or jackets, depending on your personal preference. The regular waist offers enough protection around the back and backside and offers a feminine silhouette.

For women looking for a true Skinny Fit riding denim with all the right protective features in a sleek package, look no further than the Marley Ladies SK motorcycle jeans.

TCX took the design successful X-Blend boot and turned it into an ideal boot for the female rider. The result is equally rugged and protective, but so much more elegant. The outer layer is constructed from a dark brown full grain leather that will only get nicer with age. Underneath the leather they put a waterproof yet breathable membrane meaning these boots will keep you dry when the weather turns sour. A reinforced toe box and heel counter combined with the impact-absorbing ankle discs make this an impressively protective riding boot. 

DETAILS

• Upper in waxed full-grain leather
• Waterproof T-Dry membrane
• Reinforced toe and heel counter, malleolus (ankle) protection, leather shift pad
• Insole is anatomic and removable
• Rubber tread pattern for excellent grip on any terrain.
• Heel height: 2.5 cm

IPONE VISOR RAIN OFF is a visor cleaner with a water-repellent effect. It places a protective film on the visor allowing water to slide off easily.

Spray the product on the visor, let it dry for 2 minutes and wipe with a soft cloth.

• Repels water from helmet visor
• Improves visibility by shedding water
• Suitable for glossy and matte helmets
• No marks

The quilted cafe racer motorcycle gloves are the perfect gloves for a shorter, tighter-fitting pair of gloves. With a classic ball zipped side gusset and velcro twin strap effect fastening, these quilted gloves have that retro cafe racer look whilst the traditional fleece lining makes them perfect for warm weather riding from spring through summer and autumn too!

PRODUCT INFO

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Cargo pocket style casual riding jeans

Certified waterproof leather motorcycle boots. Protective and comfortable for everyday use.

The TCX Blend 2 WP motorcycle boots are certified waterproof lace-up amphibious boots made of full-grain leather with waterproof T-DRY membrane and vintage effect pull-up finish. They ensure the highest level of safety thanks to the protective inserts on the ankles and the reinforcements in the gearshift, toe and heel area. The Blend 2 WP boots feature a Groundtrax® rubber sole, guaranteeing optimal stability, grip and abrasion resistance. The OrthoLite® footbed offers perfect cushioning of the sole of the foot even after numerous uses and high levels of breathability, for maximum comfort in every situation.

DETAILS

• Groundtrax® rubber sole.
• OrthoLite® footbed with durable and highly breathable cushioning.
• Reflective inserts for greater visibility.
• Closure with lacing system.
• Leather upper with pull-up finish.
• Reinforced malleolus, toe and heels.
• T-Dry waterproof membrane.

The TCX Drifter Waterproof Boots are protective and flexible, well-rounded adventure touring boots designed to handle everything your ADV bike was born to do. The integrity of the leather upper is formative enough to flex for walking and shifting comfort, but formidable enough to meet the demands of the trail. With malleolus inserts, calf and shift reinforcements, aluminum buckles and polyurethane shin plates, the waterproof-lined TCX Drifter Boots are prepared for off-road adventure. The lug sole achieves grip in any terrain, wet or dry, so your footing will never falter in the TCX Drifter WP Boots.

Grain leather upper with pull-up finishing; microfibre front and rear padded area. Rear reflex insert. Ergonomic stretch upper collar to keep outside dirt and debris

Details:

• UPPER: Full- Grain leather upper with pull-up finishing; microfibre front and rear padded area. Rear reflex insert. Ergonomic stretch upper collar to keep dirt and debris on the outside where it belongs
• LINING: T-DRY waterproof membrane
• REINFORCEMENTS: Ergonomic polyurethane shin plate and malleolus, reinforced toe and heel; leather shift pad
• CLOSURE: 3 adjustable aluminium ALU6060 buckles, ergonomic design
• FOOTBED: OrthoLite® footbed with long term cushioning and high level of breathability
• SOLE: Rubber outsole with deep lugs to offer a superior traction on any terrain. "Ideal" stitching construction technique

The Finer Details:

• The "Ideal" construction technique is a craft-based construction process that guarantees comfort, hard-wearing resistance and flexibility for footwear thanks to a totally traditional production process. The leather upper, prepared with the outer edges bonded and pressed onto a dedicated midsole, is stitched vertically. The yarn is dipped in a purpose-designed boiler full of melted tar to ensure total waterproofness. The result is top quality, durable footwear.
• OrthLite Footbed: Long-term cushioning:
• OrthoLite® foam compresses less than 5% of its thickness over the lifetime of the footbed, so the cushioning, fit, comfort and performance never change.
• High level breathability: the open-cells of the OrthoLite® foam allow air to circulate in and around the footbed, moving moisture away and keeping feet cooler and drier.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

When great gloves get even better!

PWR|Shield at palm

Included Connect Finger Tip for convenience

Top-notch protection for your hands

Already a classic in REV'ITs collection, the third generation of REV'ITs Avion gloves have been revised to make them future-ready. Subtle in styling, the regular-fit Avion 3 gloves incorporate a hard knuckle protector in a fully ventilated, abrasion-resistant leather outer shell to offer the necessary armour and comfort to those going out on the streets in warm conditions. Building upon an already much appreciated fit, the Avion 3 gloves have been optimized to allow an improved freedom of movement and an even better feel through the handlebars, making them a summer must-have for motorcyclists across various segments.

Goldtop's Bobber Jacket is a retro, classic 1970s style leather motorcycle jacket revived for modern-day riders. Featuring an asymmetric main zip, this double-breasted jacket provides protection through Knox's state of the art Micro-lock armour. It comes equipped with CE Level 1 armour in the shoulders and elbows and a pocket for an optional back protector. The jacket is manufactured from hand-selected, 1.4mm thick aniline cowhides which have each been hand-waxed, making each finished article unique, with a patina that ages beautifully with both time and wear. The whole jacket is finished by hand with a soft red suede trim inside the collar and cuffs, prestige quality zips throughout, and all additional metalware being made from high-quality polished Stainless Steel.

This jacket boasts a CE "AAA" level of protection, the highest most protective level it could possibly achieve. 

Available in sizes 38" to 52". Is your size not currently available on our site? No problem; we do special orders! Contact us at info@strathmoto.com and let us know what you need. Note: sizes 50 and 52 are special order and as such carry an additional $100 charge already included in the price shown as compared to standard sizes.

PRODUCT INFO

• 1.4mm Aniline cowhide leather
• CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
• Optional Knox Micro-lock Compact back protector can be purchased here
• Double-stitched diamond quilting on shoulders and lower back panel
• Traditional off-centre slanted zip
• 1 Exterior vertical breast pocket
• 2 Exterior side pockets with ball zips
• 2 Interior breast pockets
• Single adjustable Stainless Steel waist buckles 
• Industrial grade hand-polished centre zip with AERO puller
• Trademark Goldtop gold quilted lining
• Red suede leather trim in collar & cuffs

• Aero 3D mesh back, with direct rubber injection on the knuckles and phalanges
• Certified soft protection on the knuckles
• Real goatskin leather flaps on the fingers
• Insert on outside in real perforated leather, with reflective bottom for better visibility
• Real leather contrasting inserts on the cuff
• Palm in real chamois leather, with micro holes
• Webbing insert on the centre of the palm for better ventilation
• Flexible anti-abrasion insert, in micro-injected rubber, on the palm
• Real leather fourchette, with webbing inserts for greater ventilation
• Elastic flap on the wrist
• Chamois leather strap, with velcro adjustment and rubber puller
• Touch screen compatibility
• EN 13594:2016-CE motorcycle certified

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

GORE-TEX gloves in leather and PWR|Shell for adventure touring

Gore Grip technology eliminates movement between the breathable, waterproof GORE-TEX membrane and outer layer. Contrast GTX gloves’ construction combines perforated goatskin leather on the palm with PWR|Shell stretch textile on the reverse. Plus, with Pittards® sheepskin panels on the palms and thumbs, you can rely on outstanding grip, dexterity, and feel to achieve optimum control whatever the conditions. Go the distance Motorcycle touring over the summer means longer rides and every chance of sudden downpours, but nothing will dampen your day when you’re wearing Contrast GTX. An array of technical features are there to keep you comfortably dry and fully concentrated on the road ahead, and a pull tab on each wrist will help you quickly remove the glove – not that you’ll need to very often when you’ve got a touchscreen-compatible Connect Finger Tip on your index and thumb. As tough as TPU The Contrast GTX’s gauntlet design incorporates hard-shell and foam that envelops your hands, while Temperfoam® along the fingers, palms, and thumbs provides protection without hindering movement. And when the ride gets tough, a thermoplastic polyurethane (TPU) palm slider and thumb protector will cut the risk of injury should you come off your motorcycle and your hands hit the deck. Plus, a hook-and-loop closure adds a reassurance to the fit – these gloves look and feel tough and are even tougher not to love.