DMD RIVALE ECE 22.06 VISOR

Meet the RIVALE, the latest addition to the DMD family. With such an essential design it’s easy to forget there’s real innovation and technology within. Thanks to the new tri compound fiber, DMD have achieved a super compact helmet with all the modern security standards and a comfortable fit. A full-face helmet that recalls the roaring years of Motorsport. Made in Italy, with passion.

Each helmet comes with a clear visor. Dark Smoke accessory visors can be purchased separately here.

TECHNICAL DETAILS

• Full-face helmet made of tri compound fiber (carbon-kevlar-fibreglass)
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation meets the new 22.06 standard
• PIN visor closure
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then leave to air dry.

Meet the RIVALE, the latest addition to the DMD family. With such an essential design it’s easy to forget there’s real innovation and technology within. Thanks to the new tri compound fiber, DMD have achieved a super compact helmet with all the modern security standards and a comfortable fit. A full-face helmet that recalls the roaring years of Motorsport. Made in Italy, with passion.

Each helmet comes with a clear visor. Dark Smoke accessory visors can be purchased separately here.

TECHNICAL DETAILS

• Full-face helmet made of tri compound fiber (carbon-kevlar-fibreglass)
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation meets the new 22.06 standard 
• PIN visor closure
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then leave to air dry.

The jet Retro Rainbow Violet helmet is simple yet striking thanks to the glitter finish that complements a monochrome purple base. The fit is comfortable and meets all modern safety requirements. Suitable for those who like simple lines and an essential design on their motorcycle.

KEY FEATURES

Simple but impressive: glitter gives a special note where simplicity meets perfection.

Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.

Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell

TECHNICAL DETAILS:

• Helmet weight: 900 gr +/- 50.
• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
• Shell 2: L - 58 cm
• Shell 3: XL - 59/60 cm; XXL - 61 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE 22.06 Homologation

PRODUCT CARE

• The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
• Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
• To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.

The jet Retro Rainbow Green helmet is simple yet striking thanks to the glitter finish that complements a monochrome green base. The fit is comfortable and meets all modern safety requirements. Suitable for those who like simple lines and an essential design on their motorcycle.

KEY FEATURES

Simple but impressive: glitter gives a special note where simplicity meets perfection.

Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.

Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell

TECHNICAL DETAILS:

• Helmet weight: 900 gr +/- 50.
• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
• Shell 2: L - 58 cm
• Shell 3: XL - 59/60 cm; XXL - 61 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE 22.06 Homologation

PRODUCT CARE

• The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
• Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
• To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.

The jet Retro Rainbow helmet is simple yet striking thanks to the glitter finish that complements a monochrome silver base. The fit is comfortable and meets all modern safety requirements. Suitable for those who like simple lines and an essential design on their motorcycle.

KEY FEATURES

Simple but impressive: glitter gives a special note where simplicity meets perfection.

Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.

Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell

TECHNICAL DETAILS:

• Helmet weight: 900 gr +/- 50.
• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
• Shell 2: L - 58 cm
• Shell 3: XL - 59/60 cm; XXL - 61 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE 22.06 Homologation

PRODUCT CARE

• The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
• Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
• To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.

The jet Retro Deep Green helmet is part of the single-color range and comes in a shiny green finish. Safe, comfortable, and compact in size, it fits perfectly on any type of motorcycle, be it Custom, Vintage, or Cafe Racer.

KEY FEATURES

Simple but impressive: glitter gives a special note where simplicity meets perfection.

Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.

Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell

TECHNICAL DETAILS:

• Helmet weight: 900 gr +/- 50.
• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
• Shell 2: L - 58 cm
• Shell 3: XL - 59/60 cm; XXL - 61 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE 22.06 Homologation

PRODUCT CARE

• The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
• Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
• To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.