BILTWELL HELMET SHIELD GEN 1 BASEPLATE KIT SET

Lane Splitter was the first Biltwell helmet engineered to meet Europe’s comprehensive motorcycle safety standards a decade ago. Today, our feature-rich helmet for high-performance riders is ECE R22.06 certified to ensure high levels of rider safety and protection.

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Aggressively styled shell features front, side, and rear ventilation to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Removable BioFoam spoiler on underside of chin bar reduces turbulence below the rider’s face
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. To meet Europe's new, more robust standards for impact attenuation and rider safety, ECE R22.06-certified helmets may fit you more snugly than similar US DOT-compliant models. NOTE: We offer accessory cheek pads so you can fine-tune the comfort of your helmet against your cheeks and face for a perfect fit.

Lane Splitter was the first Biltwell helmet engineered to meet Europe’s comprehensive motorcycle safety standards a decade ago. Today, our feature-rich helmet for high-performance riders is ECE R22.06 certified to ensure high levels of rider safety and protection.

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Aggressively styled shell features front, side, and rear ventilation to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Removable BioFoam spoiler on underside of chin bar reduces turbulence below the rider’s face
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. To meet Europe's new, more robust standards for impact attenuation and rider safety, ECE R22.06-certified helmets may fit you more snugly than similar US DOT-compliant models. NOTE: We offer accessory cheek pads so you can fine-tune the comfort of your helmet against your cheeks and face for a perfect fit.

Progressively styled and rigorously tested, Biltwell's finest ECE-certified helmet is a top choice for high-performance riders. Comes standard with an injection molded anti-fog clear face shield.

Technical Details

• Injection-molded ABS plastic outer shell is rugged yet lightweight
• Three-piece Expanded Polystyrene (EPS) safety shell dissipates impact loads and fortifies helmet structure without compromising comfort
• Molded urethane chin bar pad features front and side vents for cooling airflow
• CE-certified polycarbonate shield is anti-fog and anti-scratch for safety and durability
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Built in recesses for various aftermarket audio & comms systems

Gringo SV takes the classic motorcycle aesthetic we reenergized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Note: the new Gringo SV will not work with Gringo S shields due to a different closure type. We will have shields for the Gringo SV in different tints available soon!

Technical Details

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified
• Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. To meet Europe's new, more robust standards for impact attenuation and rider safety, ECE R22.06-certified helmets may fit you more snugly than similar US DOT-compliant models.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. Replacement shields in different tints available here.

Technical Details

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified
  

Helmet Fitment

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model. 

NOTE: Biltwell offers accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. Replacement shields in different tints available here.

Technical Details

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified
  

Helmet Fitment

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model. 

NOTE: Biltwell offers accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.