- REV'IT
- MERLIN
- AGE OF GLORY
- FUEL MOTORCYCLES
- GOLDTOP ENGLAND
- DMD HELMETS
- NEXX HELMETS
- ARAI
- HOLY FREEDOM
- KRIEGA
- BELL HELMETS
- TCX
- KEIS HEATED GEAR
- BIKE SHED MOTORCYCLE CLUB (BSMC)
- BARUFFALDI GOGGLES
- ETHEN GOGGLES
- STRATH MOTO
- BEELINE MOTO
- BILTWELL
- CARDO
- SENA
- HJC HELMETS
- HELSTONS
- EQUILIBRIALIST
- FUELFRIEND
- MOTODEMIC
- MOTOGADGET
- MOTONE
- MOTUL
- MUC-OFF
- PIT BULL MOTORCYCLE STANDS
- RACER 1927
- RIZOMA
- ROK STRAPS
- SHOEI HELMETS
- SP CONNECT
- 100%
- T-UR
- UNIT GARAGE CUSTOM PARTS & KITS
- ZARD EXHAUSTS
-
FEATURED BRANDS
- REV'IT
- MERLIN
- AGE OF GLORY
- FUEL MOTORCYCLES
- GOLDTOP ENGLAND
- DMD HELMETS
- NEXX HELMETS
- ARAI
- HOLY FREEDOM
- KRIEGA
- BELL HELMETS
- TCX
- KEIS HEATED GEAR
- BIKE SHED MOTORCYCLE CLUB (BSMC)
- BARUFFALDI GOGGLES
- ETHEN GOGGLES
- STRATH MOTO
- BEELINE MOTO
- BILTWELL
- CARDO
- SENA
- HJC HELMETS
- HELSTONS
- EQUILIBRIALIST
- FUELFRIEND
- MOTODEMIC
- MOTOGADGET
- MOTONE
- MOTUL
- MUC-OFF
- PIT BULL MOTORCYCLE STANDS
- RACER 1927
- RIZOMA
- ROK STRAPS
- SHOEI HELMETS
- SP CONNECT
- 100%
- T-UR
- UNIT GARAGE CUSTOM PARTS & KITS
- ZARD EXHAUSTS
- GEAR
-
LADIES GEAR
- FOR YOUR BIKE
-
ON SALE NOW!
- CASUAL
-
GIFT CARDS
-
CONTACT
- REV'IT
- MERLIN
- AGE OF GLORY
- FUEL MOTORCYCLES
- GOLDTOP ENGLAND
- DMD HELMETS
- NEXX HELMETS
- ARAI
- HOLY FREEDOM
- KRIEGA
- BELL HELMETS
- TCX
- KEIS HEATED GEAR
- BIKE SHED MOTORCYCLE CLUB (BSMC)
- BARUFFALDI GOGGLES
- ETHEN GOGGLES
- STRATH MOTO
- BEELINE MOTO
- BILTWELL
- CARDO
- SENA
- HJC HELMETS
- HELSTONS
- EQUILIBRIALIST
- FUELFRIEND
- MOTODEMIC
- MOTOGADGET
- MOTONE
- MOTUL
- MUC-OFF
- PIT BULL MOTORCYCLE STANDS
- RACER 1927
- RIZOMA
- ROK STRAPS
- SHOEI HELMETS
- SP CONNECT
- 100%
- T-UR
- UNIT GARAGE CUSTOM PARTS & KITS
- ZARD EXHAUSTS
-
FEATURED BRANDS
- REV'IT
- MERLIN
- AGE OF GLORY
- FUEL MOTORCYCLES
- GOLDTOP ENGLAND
- DMD HELMETS
- NEXX HELMETS
- ARAI
- HOLY FREEDOM
- KRIEGA
- BELL HELMETS
- TCX
- KEIS HEATED GEAR
- BIKE SHED MOTORCYCLE CLUB (BSMC)
- BARUFFALDI GOGGLES
- ETHEN GOGGLES
- STRATH MOTO
- BEELINE MOTO
- BILTWELL
- CARDO
- SENA
- HJC HELMETS
- HELSTONS
- EQUILIBRIALIST
- FUELFRIEND
- MOTODEMIC
- MOTOGADGET
- MOTONE
- MOTUL
- MUC-OFF
- PIT BULL MOTORCYCLE STANDS
- RACER 1927
- RIZOMA
- ROK STRAPS
- SHOEI HELMETS
- SP CONNECT
- 100%
- T-UR
- UNIT GARAGE CUSTOM PARTS & KITS
- ZARD EXHAUSTS
- GEAR
-
LADIES GEAR
- FOR YOUR BIKE
-
ON SALE NOW!
- CASUAL
-
GIFT CARDS
-
CONTACT
Arai helmets are the benchmark for safety, quality and attention to detail. Each Arai is hand made, with a unique `birth certificate' and a record kept of every step involved in its manufacturing process, from the outer shell formation to the final test tweak of its air vents. With Arai, you know you're getting premium quality, fit and finish.
This is what we have in-store.
We can special order anything contact us
ARAI XD-5 HELMET - MOJAVE SAGE
The XD-5 is a completely redesigned helmet, packed with many new features. As with everything from Arai, every improvement is made with a priority for protection. And this new model brings us ever closer to the ideal Arai shape for protection.
One of the biggest changes is the visor system and its visor. The new VAS-A visor system, derived from the VAS-V system originally developed for the Corsair-X, has been designed to maximize Glancing-Off performance, meaning more surface area to glance off impact energy whilst offering easy installation and removal of the visor and peak. The visor itself has been redesigned for increased visibility and Glancing-Off performance, and is now a Max Vision visor, so a Pinlock insert can easily be installed. The new VAS-A visor system also makes it easier to switch, without tools, to one of the other styles. You can choose between Adventure, Off-road and On-road.
Would you like to see how to change your XD-5 Shield, change your cheek pads, change out your chin strap cover, other details of your XD-5? For all of our "How To" videos on the XD-5, please click this link to find all of our informational videos for the XD-5.
XD-5 FIT
Arai is the only company offering multiple interior-fit shapes to better address the infinite variety of riders’ head shapes and sizes.
No one pays more attention to the subtle variations and infinite possibilities of the human head shape than Arai. Why? Because it’s the secret to getting the best comfort and fit.
So for more than three decades, Arai has pioneered different shapes – and even different proportions within those shapes – in our various helmet models, working to offer a better fit for more people.
The XD-5 has Arai's INTERMEDIATE OVAL (IO) interior fit shape.
XD-5 PEAK
The all-new peak is designed for more effective ventilation, increased high speed flow-through performance, greater range of adjustability for blocking the sun, and is more resistant to buffeting, all of which leads to an overall more comfortable riding experience.
THREE DISTINCT CONFIGURATIONS
The XD-5 offers three distinct configurations depending on rider preference or riding conditions. Change the look every time you ride, or even during the same ride.
The XD-5 has the option to use just the shield for street use, just the peak (with a set of your favorite goggles) for off-road use, and the shield and peak combined to create a truly multi-functional ADV helmet.
ALL-NEW SHELL AND VAS-A SHIELD SYSTEM
The new VAS-A Max Vision system allows for easier and faster shield swaps. The shield can be attached or removed without the need for any tools. The peak utilizes only one screw on each side for removal/installation.
The amount of energy that any helmet can absorb is limited and we believe in a crash the only option is to have the helmet glance in a way that directs the impact energy away from the inside of the helmet. The shell of the XD-5 is designed to be round, smooth, and strong so that it can more easily ‘glance off’ impact energy in an actual crash.
CHIN VENT
The opening area for the XD-5 mouth-shutter is double the size compared to the XD-4. Thanks to the evolution in shell strength from the previous generation, the aperture could be made larger, and the mouth shutter could be made to flow more fresh air without the need for the mesh vents as seen on its predecessors.
INNER SHUTTER
Working in conjunction with the mouth shutter, the inner shutter allows you to adjust the amount of airflow entering the helmet. If the inner and outer shutters are both open, the air will be directed towards your mouth. If the outer shutter is open and the inner closed, the air will be directed towards the shield and help to reduce fogging.
FRONT LOGO VENT
The effectiveness of conventional forehead vents could be limited by the rider's position, but with the front logo duct, airflow is unaffected by changes in riding position. Thanks to advances in shell technology, we can add holes in the forehead area for this vent without compromising the helmet's ability to protect.
AR SPOILER
Set in a position that makes it ideal for adventure riding, the AR spoiler contributes to reducing fatigue from turbulent air throughout long rides and works to draw out hot air from the crown area.
VAS-A MAX VISION SHIELD PIN-LOCK
The new max-vision shield preserves the wide field-of-view and high level of visibility expected of an XD model. The Pinlock insert for this model has advanced to be effective at resisting fogging, even in extreme conditions, across the entire field of view.
*The Pinlock insert is an optional accessory, with one included in the box upon helmet purchase.
ODOR-RESISTANT INTERIOR
The XD-5 utilizes an interior liner that has the same level of acidity as bare skin and has odor-resistant and stain-resistant properties. The headliner is equipped with a removable foam layer on both the left and right sides for temples and a removable foam layer in the rear of the head-liner, allowing you to remove 5mm of foam if desired for exceptional micro-fitting adjustability.
*Once micro-fit pads are removed they cannot be replaced.
AIR FLAP
The retractable pull-down spoiler reduces wind intrusion into the bottom of the helmet and helps to pull out hot and humid exhaled air around the sculpted leading edges of the cheek pads. This coordinated ventilation, combined with fresh intake from the chin vent, also helps to reduce shield fogging.
*Optional ES Chin Cover can be used, but not included.
COMMUNICATIONS DEVICE CAPABILITY
The Hyper-Ridge® has been re-sculpted to provide a flat surface on the sides to allow for the easy installation of a wide range of communication devices. This increases the bonding surface between the device and the helmet and helps to reduce buffeting or possible slip-offs.
SPEAKER POCKET
Speakers can be installed directly to the provided hook & loop panel without the need to remove the cheek pad covers. Both ear pockets are deep and wide, designed to accommodate thicker speakers with plenty of room to position them to increase comfort.
NECK ROLL WIRE POCKET
A pocket to tuck away excess wiring and connectors as well as holes to easily run wires from side to side, have been incorporated into the neck roll to prevent wires coming loose while putting on or taking off the helmet. These features provide a smart way to tackle cable management inside your helmet.
![](https://cdn.shopify.com/s/files/1/0262/7297/files/XD-5chart2024v3_480x480.jpg?v=1716831601)
![ARAI XD-5 HELMET - MOJAVE SAGE](http://www.strathmoto.com/cdn/shop/files/TOUR-X5_EAGLEGREY_P_{width}x.jpg?v=1716832085)
![ARAI XD-5 HELMET - MOJAVE SAGE](http://www.strathmoto.com/cdn/shop/files/XD-5chart2024v3_dd7ac838-7e35-4719-8da3-ebee61d907c8_{width}x.jpg?v=1716832085)
![ARAI XD-5 HELMET - MOJAVE SAGE](http://www.strathmoto.com/cdn/shop/files/TOUR-X5_EAGLEGREY_P_{width}x.jpg?v=1716832085)
![ARAI XD-5 HELMET - MOJAVE SAGE](http://www.strathmoto.com/cdn/shop/files/XD-5chart2024v3_dd7ac838-7e35-4719-8da3-ebee61d907c8_{width}x.jpg?v=1716832085)
ARAI XD-5 HELMET - BLACK FROST
The XD-5 is a completely redesigned helmet, packed with many new features. As with everything from Arai, every improvement is made with a priority for protection. And this new model brings us ever closer to the ideal Arai shape for protection.
One of the biggest changes is the visor system and its visor. The new VAS-A visor system, derived from the VAS-V system originally developed for the Corsair-X, has been designed to maximize Glancing-Off performance, meaning more surface area to glance off impact energy whilst offering easy installation and removal of the visor and peak. The visor itself has been redesigned for increased visibility and Glancing-Off performance, and is now a Max Vision visor, so a Pinlock insert can easily be installed. The new VAS-A visor system also makes it easier to switch, without tools, to one of the other styles. You can choose between Adventure, Off-road and On-road.
Would you like to see how to change your XD-5 Shield, change your cheek pads, change out your chin strap cover, other details of your XD-5? For all of our "How To" videos on the XD-5, please click this link to find all of our informational videos for the XD-5.
XD-5 FIT
Arai is the only company offering multiple interior-fit shapes to better address the infinite variety of riders’ head shapes and sizes.
No one pays more attention to the subtle variations and infinite possibilities of the human head shape than Arai. Why? Because it’s the secret to getting the best comfort and fit.
So for more than three decades, Arai has pioneered different shapes – and even different proportions within those shapes – in our various helmet models, working to offer a better fit for more people.
The XD-5 has Arai's INTERMEDIATE OVAL (IO) interior fit shape.
XD-5 PEAK
The all-new peak is designed for more effective ventilation, increased high speed flow-through performance, greater range of adjustability for blocking the sun, and is more resistant to buffeting, all of which leads to an overall more comfortable riding experience.
THREE DISTINCT CONFIGURATIONS
The XD-5 offers three distinct configurations depending on rider preference or riding conditions. Change the look every time you ride, or even during the same ride.
The XD-5 has the option to use just the shield for street use, just the peak (with a set of your favorite goggles) for off-road use, and the shield and peak combined to create a truly multi-functional ADV helmet.
ALL-NEW SHELL AND VAS-A SHIELD SYSTEM
The new VAS-A Max Vision system allows for easier and faster shield swaps. The shield can be attached or removed without the need for any tools. The peak utilizes only one screw on each side for removal/installation.
The amount of energy that any helmet can absorb is limited and we believe in a crash the only option is to have the helmet glance in a way that directs the impact energy away from the inside of the helmet. The shell of the XD-5 is designed to be round, smooth, and strong so that it can more easily ‘glance off’ impact energy in an actual crash.
CHIN VENT
The opening area for the XD-5 mouth-shutter is double the size compared to the XD-4. Thanks to the evolution in shell strength from the previous generation, the aperture could be made larger, and the mouth shutter could be made to flow more fresh air without the need for the mesh vents as seen on its predecessors.
INNER SHUTTER
Working in conjunction with the mouth shutter, the inner shutter allows you to adjust the amount of airflow entering the helmet. If the inner and outer shutters are both open, the air will be directed towards your mouth. If the outer shutter is open and the inner closed, the air will be directed towards the shield and help to reduce fogging.
FRONT LOGO VENT
The effectiveness of conventional forehead vents could be limited by the rider's position, but with the front logo duct, airflow is unaffected by changes in riding position. Thanks to advances in shell technology, we can add holes in the forehead area for this vent without compromising the helmet's ability to protect.
AR SPOILER
Set in a position that makes it ideal for adventure riding, the AR spoiler contributes to reducing fatigue from turbulent air throughout long rides and works to draw out hot air from the crown area.
VAS-A MAX VISION SHIELD PIN-LOCK
The new max-vision shield preserves the wide field-of-view and high level of visibility expected of an XD model. The Pinlock insert for this model has advanced to be effective at resisting fogging, even in extreme conditions, across the entire field of view.
*The Pinlock insert is an optional accessory, with one included in the box upon helmet purchase.
ODOR-RESISTANT INTERIOR
The XD-5 utilizes an interior liner that has the same level of acidity as bare skin and has odor-resistant and stain-resistant properties. The headliner is equipped with a removable foam layer on both the left and right sides for temples and a removable foam layer in the rear of the head-liner, allowing you to remove 5mm of foam if desired for exceptional micro-fitting adjustability.
*Once micro-fit pads are removed they cannot be replaced.
AIR FLAP
The retractable pull-down spoiler reduces wind intrusion into the bottom of the helmet and helps to pull out hot and humid exhaled air around the sculpted leading edges of the cheek pads. This coordinated ventilation, combined with fresh intake from the chin vent, also helps to reduce shield fogging.
*Optional ES Chin Cover can be used, but not included.
COMMUNICATIONS DEVICE CAPABILITY
The Hyper-Ridge® has been re-sculpted to provide a flat surface on the sides to allow for the easy installation of a wide range of communication devices. This increases the bonding surface between the device and the helmet and helps to reduce buffeting or possible slip-offs.
SPEAKER POCKET
Speakers can be installed directly to the provided hook & loop panel without the need to remove the cheek pad covers. Both ear pockets are deep and wide, designed to accommodate thicker speakers with plenty of room to position them to increase comfort.
NECK ROLL WIRE POCKET
A pocket to tuck away excess wiring and connectors as well as holes to easily run wires from side to side, have been incorporated into the neck roll to prevent wires coming loose while putting on or taking off the helmet. These features provide a smart way to tackle cable management inside your helmet.
![](https://cdn.shopify.com/s/files/1/0262/7297/files/XD-5chart2024v3_480x480.jpg?v=1716831601)
![ARAI XD-5 HELMET - BLACK FROST](http://www.strathmoto.com/cdn/shop/files/TOUR-CROSS-V_FLAT-BLACK_P-web_{width}x.jpg?v=1716831601)
![ARAI XD-5 HELMET - BLACK FROST](http://www.strathmoto.com/cdn/shop/files/XD-5_FLAT-BLACK_B_{width}x.jpg?v=1716831601)
![ARAI XD-5 HELMET - BLACK FROST](http://www.strathmoto.com/cdn/shop/files/XD-5chart2024v3_{width}x.jpg?v=1716831601)
![ARAI XD-5 HELMET - BLACK FROST](http://www.strathmoto.com/cdn/shop/files/TOUR-CROSS-V_FLAT-BLACK_P-web_{width}x.jpg?v=1716831601)
![ARAI XD-5 HELMET - BLACK FROST](http://www.strathmoto.com/cdn/shop/files/XD-5_FLAT-BLACK_B_{width}x.jpg?v=1716831601)
![ARAI XD-5 HELMET - BLACK FROST](http://www.strathmoto.com/cdn/shop/files/XD-5chart2024v3_{width}x.jpg?v=1716831601)
ARAI REGENT-X HELMET - BLACK FROST
The all-new Arai Regent-X is designed to isolate you from distractions with the kind of comfort only Arai can deliver. Built with the same protection as our flagship Corsair-X model, the Regent-X features a new interior for both comfort and ease of taking it on and off.
REGENT-X FIT
Arai is the only company offering multiple interior-fit shapes to better address the infinite variety of riders’ head shapes and sizes.
No one pays more attention to the subtle variations and infinite possibilities of the human head shape than Arai. Why? Because it’s the secret to getting the best comfort and fit.
So for more than three decades, Arai has pioneered different shapes – and even different proportions within those shapes – in our various helmet models, working to offer a better fit for more people.
The Regent-X has Arai's INTERMEDIATE OVAL (IO) interior fit shape.
VAS SHIELD SYSTEM
The Variable Axis System shield mechanism was developed to enhance the shape of the shell, but the easy to learn changing mechanism is what most people are raving about. Quick, easy and intuitive.
IMPROVED SHIELD LATCH
The VAS latch captures and securely holds the shield closed to help prevent unexpected opening. In addition to the de-mist function, the larger latch allows for intuitive and seamless shield operation.
IMPROVED GLANCE OFF ABILITY
The VAS pivot cover is now smaller and lower than the previous design, yielding an average of 24mm more area above the cover. The shell is now smoother along the Snell test line in the temple area, thus increasing the helmet’s ability to glance off objects during an impact.
Compared with the shell of the Corsair-V, the smooth area around the temple is increased by an average of 24mm on the new VAS model. Having a rounder, smoother, stronger shell to improve glance off ability.
PB-CLC SHELL
Born from Arai’s exclusive Formula One helmet technology, the Peripherally Belted Complex Laminate Construction shell is developed to be both light and strong. The upper edge of the eye port is reinforced with Arai’s Peripheral Belt, custom woven in-house with proprietary super fibers to increase shell strength without adding thickness or weight.
ONE-PIECE MULTI-DENSITY LINER
A one-piece multi-density liner, tuned with varying densities according to the position and volume of each given area within each shell size, provides protection where it’s needed most, and allows Arai to make a compact helmet that puts protection first, and is as aerodynamic and light as possible.
INTERIOR: SEMI-REMOVABLE LINER
The top padding stays in place but the liner is fixed with Velcro and easily removed for cleaning.
INTERIOR: REPLACEABLE CHEEK PADS/EAR CUPS
Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.
COMFORT: 5MM WIDER BASE
The exclusive shell flares 5mm around the base, making it easier to get the helmet on and off (for newcomers to Arai the initial ‘snugness’ when putting the helmet on or taking it off can be challenging).
REAR VENTILATION: ONE-PIECE REAR EXHAUST
Extracts more hot air from the helmets interior and improves aerodynamics.
REAR VENTILATION: SIDE EXHAUSTS
Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance.
REAR VENTILATION: NECK EXHAUST VENT
To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet.
CHIN CURTAIN
Attached to the bottom of the helmet, the new chin curtain helps to further accentuate the Egg-shape form. The curtain simultaneously blocks air intrusion from turbulent air below and increases negative pressure to enhance the exhaust function of FFS by drawing more air from the mouth area. The improved airflow reduces noise even further.
FACIAL CONTOUR SYSTEM (FCS)
To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure.
TESTED
The Regent-X, along with all Arai models available in North America, meets or exceeds the SNELL M2020 standard, but only after they all first satisfy Arai's stringent in-house criteria.
![](https://cdn.shopify.com/s/files/1/0262/7297/files/Regent_X_Fit_Chartcopy_480x480.jpg?v=1716830807)
![ARAI REGENT-X HELMET - BLACK FROST](http://www.strathmoto.com/cdn/shop/files/RegentX_Black_Frost_F_{width}x.jpg?v=1716831365)
![ARAI REGENT-X HELMET - BLACK FROST](http://www.strathmoto.com/cdn/shop/files/Regent_X_Fit_Chartcopy_4f65eedc-bcfa-45c6-8922-304a090684a0_{width}x.jpg?v=1716831365)
![ARAI REGENT-X HELMET - BLACK FROST](http://www.strathmoto.com/cdn/shop/files/RegentX_Black_Frost_F_{width}x.jpg?v=1716831365)
![ARAI REGENT-X HELMET - BLACK FROST](http://www.strathmoto.com/cdn/shop/files/Regent_X_Fit_Chartcopy_4f65eedc-bcfa-45c6-8922-304a090684a0_{width}x.jpg?v=1716831365)
ARAI REGENT-X HELMET - MODERN GRAY
The all-new Arai Regent-X is designed to isolate you from distractions with the kind of comfort only Arai can deliver. Built with the same protection as our flagship Corsair-X model, the Regent-X features a new interior for both comfort and ease of taking it on and off.
REGENT-X FIT
Arai is the only company offering multiple interior-fit shapes to better address the infinite variety of riders’ head shapes and sizes.
No one pays more attention to the subtle variations and infinite possibilities of the human head shape than Arai. Why? Because it’s the secret to getting the best comfort and fit.
So for more than three decades, Arai has pioneered different shapes – and even different proportions within those shapes – in our various helmet models, working to offer a better fit for more people.
The Regent-X has Arai's INTERMEDIATE OVAL (IO) interior fit shape.
VAS SHIELD SYSTEM
The Variable Axis System shield mechanism was developed to enhance the shape of the shell, but the easy to learn changing mechanism is what most people are raving about. Quick, easy and intuitive.
IMPROVED SHIELD LATCH
The VAS latch captures and securely holds the shield closed to help prevent unexpected opening. In addition to the de-mist function, the larger latch allows for intuitive and seamless shield operation.
IMPROVED GLANCE OFF ABILITY
The VAS pivot cover is now smaller and lower than the previous design, yielding an average of 24mm more area above the cover. The shell is now smoother along the Snell test line in the temple area, thus increasing the helmet’s ability to glance off objects during an impact.
Compared with the shell of the Corsair-V, the smooth area around the temple is increased by an average of 24mm on the new VAS model. Having a rounder, smoother, stronger shell to improve glance off ability.
PB-CLC SHELL
Born from Arai’s exclusive Formula One helmet technology, the Peripherally Belted Complex Laminate Construction shell is developed to be both light and strong. The upper edge of the eye port is reinforced with Arai’s Peripheral Belt, custom woven in-house with proprietary super fibers to increase shell strength without adding thickness or weight.
ONE-PIECE MULTI-DENSITY LINER
A one-piece multi-density liner, tuned with varying densities according to the position and volume of each given area within each shell size, provides protection where it’s needed most, and allows Arai to make a compact helmet that puts protection first, and is as aerodynamic and light as possible.
INTERIOR: SEMI-REMOVABLE LINER
The top padding stays in place but the liner is fixed with Velcro and easily removed for cleaning.
INTERIOR: REPLACEABLE CHEEK PADS/EAR CUPS
Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.
COMFORT: 5MM WIDER BASE
The exclusive shell flares 5mm around the base, making it easier to get the helmet on and off (for newcomers to Arai the initial ‘snugness’ when putting the helmet on or taking it off can be challenging).
REAR VENTILATION: ONE-PIECE REAR EXHAUST
Extracts more hot air from the helmets interior and improves aerodynamics.
REAR VENTILATION: SIDE EXHAUSTS
Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance.
REAR VENTILATION: NECK EXHAUST VENT
To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet.
CHIN CURTAIN
Attached to the bottom of the helmet, the new chin curtain helps to further accentuate the Egg-shape form. The curtain simultaneously blocks air intrusion from turbulent air below and increases negative pressure to enhance the exhaust function of FFS by drawing more air from the mouth area. The improved airflow reduces noise even further.
FACIAL CONTOUR SYSTEM (FCS)
To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure.
TESTED
The Regent-X, along with all Arai models available in North America, meets or exceeds the SNELL M2020 standard, but only after they all first satisfy Arai's stringent in-house criteria.
![](https://cdn.shopify.com/s/files/1/0262/7297/files/Regent_X_Fit_Chartcopy_480x480.jpg?v=1716830807)
![ARAI REGENT-X HELMET - MODERN GRAY](http://www.strathmoto.com/cdn/shop/files/RegentX_ModernGray_F_{width}x.jpg?v=1716830807)
![ARAI REGENT-X HELMET - MODERN GRAY](http://www.strathmoto.com/cdn/shop/files/Regent_X_Fit_Chartcopy_{width}x.jpg?v=1716830807)
![ARAI REGENT-X HELMET - MODERN GRAY](http://www.strathmoto.com/cdn/shop/files/RegentX_ModernGray_F_{width}x.jpg?v=1716830807)
![ARAI REGENT-X HELMET - MODERN GRAY](http://www.strathmoto.com/cdn/shop/files/Regent_X_Fit_Chartcopy_{width}x.jpg?v=1716830807)
ARAI VAS-V SHIELD, MAX-VISION - DARK SMOKE
Replacement shield for the VAS (Variable Axis System), Dark Tint. Accepts PinLock Anti-Fog lens insert (#1057C-120) sold separately.
*DO NOT use colored/tinted Pin Lock Len inserts with this or any colored/tinted shield, as the combined effect may reduce your vision to a level that can be dangerous. ONLY USE a clear Pin Lock Lens.
Compatible models: Corsair-X, Signet-X, Quantum-X, Defiant-X, Regent-X
![ARAI VAS-V SHIELD, MAX-VISION - DARK SMOKE](http://www.strathmoto.com/cdn/shop/files/830913_{width}x.jpg?v=1716837563)
![ARAI VAS-V SHIELD, MAX-VISION - DARK SMOKE](http://www.strathmoto.com/cdn/shop/files/vas-v_max-v_shield_smoke_{width}x.jpg?v=1716837473)
![ARAI VAS-V SHIELD, MAX-VISION - DARK SMOKE](http://www.strathmoto.com/cdn/shop/files/830913_{width}x.jpg?v=1716837563)
![ARAI VAS-V SHIELD, MAX-VISION - DARK SMOKE](http://www.strathmoto.com/cdn/shop/files/vas-v_max-v_shield_smoke_{width}x.jpg?v=1716837473)