Strath Moto

STYLMARTIN ROCKET WP (WATERPROOF) BOOTS - BROWN

$438.00

STYLMARTIN SMITH WP (WATERPROOF) BOOTS

$385.00

View all

View all
7 products

Rev'it! Sand 4 sale!

Sale

REV'IT! SAND 4 H20 LADIES JACKET

REV'IT! SAND 4 H20 JACKET - SILVER BLACK

Sale

REV'IT! SAND 4 H20 JACKET - GREY-ORANGE

Sale

REV'IT! SAND 4 H20 JACKET - CAMO BROWN

Sold Out

REV'IT! SAND 4 H20 JACKET - BLACK

Sale

$618.00 $432.00 Save $186.00

Sale

REV'IT! SAND 4 H20 PANTS

Sale

REV'IT! SAND 4 H20 LADIES PANTS

$618.00 $432.00 Save $186.00

REV'IT! NEW HEIGHTS LADIES GLOVES - AUBERGINE

$152.00

Sale

REV'IT! SAND 4 H20 GLOVES - BLACK

$222.00 $152.00 Save $70.00

Sale

REV'IT! SAND 4 LADIES GLOVES-BLACK

$187.00 $129.00 Save $58.00

Sale

REV'IT! SAND 4 GLOVES - GREY-BLACK

$187.00 $129.00 Save $58.00

Sale

REV'IT! SAND 4 GLOVES - BLACK

$187.00 $129.00 Save $58.00

View all

View all
12 products

REV'IT! SAND 4 H20 JACKET - SILVER BLACK

$816.00 $566.00 Save $250.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

For many years, the Sand outfit has been the go-to choice for riders looking for a rugged and versatile jacket and pants combination that is fully prepared to take on any challenging adventure on or off-road. Hot, wet, or cold weather will not stop you from reaching your destination, wherever the road may lead you. This jacket will take you anywhere in style and total comfort. Meet the 4th generation of this iconic piece. Meet the Sand 4 H2O jacket. The tough yet lightweight, abrasion-resistant outer shell is engineered to last a multitude of around-the-world trips and is designed to provide excellent freedom of movement for the most demanding and technical riding situations.

For maximum impact protection, the Sand 4 H2O includes our award-winning, industry-leading SEEFLEX™ CE-level 2 protectors at the shoulders and elbows. It also comes prepared for the optional and equally impressive SEESOFT™ CE-level 2 insert back protector. You’re ready to tackle any challenge with this jacket. When we say the Sand 4 H2O jacket is versatile, we mean that it is prepared for any climate you might encounter, and that it allows you to configurate it in the best possible way to ensure maximum comfort. Every layer is removable and separately wearable, from the waterproof hydratex® membrane to the insulated winter lining. Changing seasons or weather conditions won’t deter you from getting on your bike, you’re ready for it all. Multiple adjustment straps and tabs on the arms, and variable height adjustment straps at the waist will ensure the perfect fit to your body with or without the liners installed.

If you are looking for airflow, this jacket has plenty of options that allow you to regulate the amount of wind that blows towards your body. It features 3 ventilation panels on the front, 4 ventilation zippers on the arms, and 2 exhaust vents zipper on the back. The 2 front pockets, big rear pocket, and 2 inner pockets provide ample storage space so you can bring all your essentials along for the ride and keep them close. The back pocket is even large enough to store the liners when not in use. All the outside pockets can be closed with zippers to make sure you won’t lose your valuable possessions during the ride. Durable, versatile, and practical.

The highest specifications regarding tear, cut and abrasion-resistance and top-notch impact armor. The Sand 4 H2O jacket has it all and is ready for your next ride around the world.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

Adjustability

Adjustable elbow protection: The adjustable elbow protection pockets allow you to tailor the CE-rated elbow protection to three different heights to perfectly fit your body and for optimal comfort while riding.
Adjustment drawcord at hem
Adjustment strap at lower arm
Adjustment tab at cuffs
Adjustment tab at upper arm
Flexisnap at collar: The REV’IT! flexisnap makes it possible to adjust the collar circumference easily and personalize its fit to each rider. A jacket is often worn in more then one season, and the flexisnap makes it possible to adjust the collar within seconds. During winter a wider collar circumference accommodates combining the jacket with a balaclava or wind collar, while during summer, a wider circumference lets an all-important cooling wind into the collar.
Variable height adjustment straps at waist

Storage

Inner pocket within thermal liner: The internal pocket within the thermal liner allows for additional storage and for riders to keep personal items close.
Two inner pockets
Two waterproof stash pockets at waist
Waterproof inner pocket within waterproof liner: The internal pocket within the waterproof liner is waterproof.
Waterproof stash pocket on back

Lining

3D mesh

Features

Long connection zipper
Prepared for REV’IT! Segur neck brace
Prepared for vest connector NEON: The Vest connector NEON allows you to the upgrade your jacket with a vest that quickly and easily attaches. The highly visible vest offers enhanced safety.
Separately wearable hydratex®|Lite liner
Short connection zipper
Short connection zipper in detachable waterproof liner: Adding to the versatility of the waterproof detachable liner, it comes with a short connection zipper, allowing you to securely fasten it to your riding trousers (or jeans via the Safeway 2 belts), when possible.
Soft edge at collar: For extra comfort, the inside of the collar is covered with a soft fabric.
Two-way Collar Snap Closure System

REV'IT! SAND 4 H20 JACKET - SILVER BLACK

REV'IT! SAND 4 H20 JACKET - GREY-ORANGE

$816.00 $566.00 Save $250.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

For many years, the Sand outfit has been the go-to choice for riders looking for a rugged and versatile jacket and pants combination that is fully prepared to take on any challenging adventure on or off-road. Hot, wet, or cold weather will not stop you from reaching your destination, wherever the road may lead you. This jacket will take you anywhere in style and total comfort. Meet the 4th generation of this iconic piece. Meet the Sand 4 H2O jacket. The tough yet lightweight, abrasion-resistant outer shell is engineered to last a multitude of around-the-world trips and is designed to provide excellent freedom of movement for the most demanding and technical riding situations.

For maximum impact protection, the Sand 4 H2O includes our award-winning, industry-leading SEEFLEX™ CE-level 2 protectors at the shoulders and elbows. It also comes prepared for the optional and equally impressive SEESOFT™ CE-level 2 insert back protector. You’re ready to tackle any challenge with this jacket. When we say the Sand 4 H2O jacket is versatile, we mean that it is prepared for any climate you might encounter, and that it allows you to configurate it in the best possible way to ensure maximum comfort. Every layer is removable and separately wearable, from the waterproof hydratex® membrane to the insulated winter lining. Changing seasons or weather conditions won’t deter you from getting on your bike, you’re ready for it all. Multiple adjustment straps and tabs on the arms, and variable height adjustment straps at the waist will ensure the perfect fit to your body with or without the liners installed.

If you are looking for airflow, this jacket has plenty of options that allow you to regulate the amount of wind that blows towards your body. It features 3 ventilation panels on the front, 4 ventilation zippers on the arms, and 2 exhaust vents zipper on the back. The 2 front pockets, big rear pocket, and 2 inner pockets provide ample storage space so you can bring all your essentials along for the ride and keep them close. The back pocket is even large enough to store the liners when not in use. All the outside pockets can be closed with zippers to make sure you won’t lose your valuable possessions during the ride. Durable, versatile, and practical.

The highest specifications regarding tear, cut and abrasion-resistance and top-notch impact armor. The Sand 4 H2O jacket has it all and is ready for your next ride around the world.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

Adjustability

Adjustable elbow protection: The adjustable elbow protection pockets allow you to tailor the CE-rated elbow protection to three different heights to perfectly fit your body and for optimal comfort while riding.
Adjustment drawcord at hem
Adjustment strap at lower arm
Adjustment tab at cuffs
Adjustment tab at upper arm
Flexisnap at collar: The REV’IT! flexisnap makes it possible to adjust the collar circumference easily and personalize its fit to each rider. A jacket is often worn in more then one season, and the flexisnap makes it possible to adjust the collar within seconds. During winter a wider collar circumference accommodates combining the jacket with a balaclava or wind collar, while during summer, a wider circumference lets an all-important cooling wind into the collar.
Variable height adjustment straps at waist

Storage

Inner pocket within thermal liner: The internal pocket within the thermal liner allows for additional storage and for riders to keep personal items close.
Two inner pockets
Two waterproof stash pockets at waist
Waterproof inner pocket within waterproof liner: The internal pocket within the waterproof liner is waterproof.
Waterproof stash pocket on back

Lining

3D mesh

Features

Long connection zipper
Prepared for REV’IT! Segur neck brace
Prepared for vest connector NEON: The Vest connector NEON allows you to the upgrade your jacket with a vest that quickly and easily attaches. The highly visible vest offers enhanced safety.
Separately wearable hydratex®|Lite liner
Short connection zipper
Short connection zipper in detachable waterproof liner: Adding to the versatility of the waterproof detachable liner, it comes with a short connection zipper, allowing you to securely fasten it to your riding trousers (or jeans via the Safeway 2 belts), when possible.
Soft edge at collar: For extra comfort, the inside of the collar is covered with a soft fabric.
Two-way Collar Snap Closure System

REV'IT! SAND 4 H20 JACKET - CAMO BROWN

$816.00 $566.00 Save $250.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

For many years, the Sand outfit has been the go-to choice for riders looking for a rugged and versatile jacket and pants combination that is fully prepared to take on any challenging adventure on or off-road. Hot, wet, or cold weather will not stop you from reaching your destination, wherever the road may lead you. This jacket will take you anywhere in style and total comfort. Meet the 4th generation of this iconic piece. Meet the Sand 4 H2O jacket. The tough yet lightweight, abrasion-resistant outer shell is engineered to last a multitude of around-the-world trips and is designed to provide excellent freedom of movement for the most demanding and technical riding situations.

For maximum impact protection, the Sand 4 H2O includes our award-winning, industry-leading SEEFLEX™ CE-level 2 protectors at the shoulders and elbows. It also comes prepared for the optional and equally impressive SEESOFT™ CE-level 2 insert back protector. You’re ready to tackle any challenge with this jacket. When we say the Sand 4 H2O jacket is versatile, we mean that it is prepared for any climate you might encounter, and that it allows you to configurate it in the best possible way to ensure maximum comfort. Every layer is removable and separately wearable, from the waterproof hydratex® membrane to the insulated winter lining. Changing seasons or weather conditions won’t deter you from getting on your bike, you’re ready for it all. Multiple adjustment straps and tabs on the arms, and variable height adjustment straps at the waist will ensure the perfect fit to your body with or without the liners installed.

If you are looking for airflow, this jacket has plenty of options that allow you to regulate the amount of wind that blows towards your body. It features 3 ventilation panels on the front, 4 ventilation zippers on the arms, and 2 exhaust vents zipper on the back. The 2 front pockets, big rear pocket, and 2 inner pockets provide ample storage space so you can bring all your essentials along for the ride and keep them close. The back pocket is even large enough to store the liners when not in use. All the outside pockets can be closed with zippers to make sure you won’t lose your valuable possessions during the ride. Durable, versatile, and practical.

The highest specifications regarding tear, cut and abrasion-resistance and top-notch impact armor. The Sand 4 H2O jacket has it all and is ready for your next ride around the world.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

Adjustability

Adjustable elbow protection: The adjustable elbow protection pockets allow you to tailor the CE-rated elbow protection to three different heights to perfectly fit your body and for optimal comfort while riding.
Adjustment drawcord at hem
Adjustment strap at lower arm
Adjustment tab at cuffs
Adjustment tab at upper arm
Flexisnap at collar: The REV’IT! flexisnap makes it possible to adjust the collar circumference easily and personalize its fit to each rider. A jacket is often worn in more then one season, and the flexisnap makes it possible to adjust the collar within seconds. During winter a wider collar circumference accommodates combining the jacket with a balaclava or wind collar, while during summer, a wider circumference lets an all-important cooling wind into the collar.
Variable height adjustment straps at waist

Storage

Inner pocket within thermal liner: The internal pocket within the thermal liner allows for additional storage and for riders to keep personal items close.
Two inner pockets
Two waterproof stash pockets at waist
Waterproof inner pocket within waterproof liner: The internal pocket within the waterproof liner is waterproof.
Waterproof stash pocket on back

Lining

3D mesh

Features

Long connection zipper
Prepared for REV’IT! Segur neck brace
Prepared for vest connector NEON: The Vest connector NEON allows you to the upgrade your jacket with a vest that quickly and easily attaches. The highly visible vest offers enhanced safety.
Separately wearable hydratex®|Lite liner
Short connection zipper
Short connection zipper in detachable waterproof liner: Adding to the versatility of the waterproof detachable liner, it comes with a short connection zipper, allowing you to securely fasten it to your riding trousers (or jeans via the Safeway 2 belts), when possible.
Soft edge at collar: For extra comfort, the inside of the collar is covered with a soft fabric.
Two-way Collar Snap Closure System

REV'IT! SAND 4 H20 JACKET - BLACK

$816.00 $566.00 Save $250.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

For many years, the Sand outfit has been the go-to choice for riders looking for a rugged and versatile jacket and pants combination that is fully prepared to take on any challenging adventure on or off-road. Hot, wet, or cold weather will not stop you from reaching your destination, wherever the road may lead you. This jacket will take you anywhere in style and total comfort. Meet the 4th generation of this iconic piece. Meet the Sand 4 H2O jacket. The tough yet lightweight, abrasion-resistant outer shell is engineered to last a multitude of around-the-world trips and is designed to provide excellent freedom of movement for the most demanding and technical riding situations.

For maximum impact protection, the Sand 4 H2O includes our award-winning, industry-leading SEEFLEX™ CE-level 2 protectors at the shoulders and elbows. It also comes prepared for the optional and equally impressive SEESOFT™ CE-level 2 insert back protector. You’re ready to tackle any challenge with this jacket. When we say the Sand 4 H2O jacket is versatile, we mean that it is prepared for any climate you might encounter, and that it allows you to configurate it in the best possible way to ensure maximum comfort. Every layer is removable and separately wearable, from the waterproof hydratex® membrane to the insulated winter lining. Changing seasons or weather conditions won’t deter you from getting on your bike, you’re ready for it all. Multiple adjustment straps and tabs on the arms, and variable height adjustment straps at the waist will ensure the perfect fit to your body with or without the liners installed.

If you are looking for airflow, this jacket has plenty of options that allow you to regulate the amount of wind that blows towards your body. It features 3 ventilation panels on the front, 4 ventilation zippers on the arms, and 2 exhaust vents zipper on the back. The 2 front pockets, big rear pocket, and 2 inner pockets provide ample storage space so you can bring all your essentials along for the ride and keep them close. The back pocket is even large enough to store the liners when not in use. All the outside pockets can be closed with zippers to make sure you won’t lose your valuable possessions during the ride. Durable, versatile, and practical.

The highest specifications regarding tear, cut and abrasion-resistance and top-notch impact armor. The Sand 4 H2O jacket has it all and is ready for your next ride around the world.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

Adjustability

Adjustable elbow protection: The adjustable elbow protection pockets allow you to tailor the CE-rated elbow protection to three different heights to perfectly fit your body and for optimal comfort while riding.
Adjustment drawcord at hem
Adjustment strap at lower arm
Adjustment tab at cuffs
Adjustment tab at upper arm
Flexisnap at collar: The REV’IT! flexisnap makes it possible to adjust the collar circumference easily and personalize its fit to each rider. A jacket is often worn in more then one season, and the flexisnap makes it possible to adjust the collar within seconds. During winter a wider collar circumference accommodates combining the jacket with a balaclava or wind collar, while during summer, a wider circumference lets an all-important cooling wind into the collar.
Variable height adjustment straps at waist

Storage

Inner pocket within thermal liner: The internal pocket within the thermal liner allows for additional storage and for riders to keep personal items close.
Two inner pockets
Two waterproof stash pockets at waist
Waterproof inner pocket within waterproof liner: The internal pocket within the waterproof liner is waterproof.
Waterproof stash pocket on back

Lining

3D mesh

Features

Long connection zipper
Prepared for REV’IT! Segur neck brace
Prepared for vest connector NEON: The Vest connector NEON allows you to the upgrade your jacket with a vest that quickly and easily attaches. The highly visible vest offers enhanced safety.
Separately wearable hydratex®|Lite liner
Short connection zipper
Short connection zipper in detachable waterproof liner: Adding to the versatility of the waterproof detachable liner, it comes with a short connection zipper, allowing you to securely fasten it to your riding trousers (or jeans via the Safeway 2 belts), when possible.
Soft edge at collar: For extra comfort, the inside of the collar is covered with a soft fabric.
Two-way Collar Snap Closure System

REV'IT! SAND 4 H20 GLOVES - BLACK

$222.00 $152.00 Save $70.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

The Sand 4 H2O gloves are the go-to gloves for the rider that doesn’t let grey skies and the possibility of rain get in the way of his riding plans. These gloves have been engineered specifically for riding on or off-road during unstable weather conditions in spring, summer or fall. Their foundation is based on the iconic Sand 4 gloves but the design team traded in ventilation for waterproofing. They did that by incorporating a waterproof and breathable Hydratex® Z-liner. The gloves offer almost the same high level of dexterity and feel on the grips and levers as the Sand 4 gloves all while keeping your hands comfortable and dry during the whole ride. Stretch material is used on the top of the glove to increase flexibility and freedom of movement on the controls of your bike. They also feature a new TPR knuckle protector, designed especially for these gloves. Additional protection is provided by TPR sliders on the fingers, thumb and palm. Thanks to the rugged pull tab on the cuff, slipping on these gloves is a breeze and you can secure them in place with the hook-and-loop closure followed by the hook-and-loop wrist strap. We added extra reflective elements on the gloves for increased visibility during inclement weather conditions or nighttime riding. If you want to adjust your route during your journey, the integrated Connect Finger Tip makes sure you can control your touchscreen device with the gloves on. Ride on in the rain.

Features

Connect Finger Tip
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.

Grip panel at palm
This part at the inside of the knees gives you extra grip for ultimate control in the corners. It also protects the leather from wear and tear.

Pull tab
Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone

Regular cuff

Visor wiper
The material used on the index finger of the glove has a visor wipe function. It helps clear water or moisture off the visor for better visibility when riding in wet weather.

REV'IT! SAND 4 LADIES GLOVES-BLACK

$187.00 $129.00 Save $58.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

Although the Sand 4 Ladies gloves have been designed to create a perfect match with the Sand 4 H2O Ladies outfit, these gloves are bound to become the go-to gloves for a large audience of female adventure riders across the globe. These are not just smaller versions of the men’s model, but have been specifically designed using our female-specific fit glove pattern. These gloves have been specifically designed and engineered for summer use, providing optimal grip, breathability, and ventilation. To make sure your hands stay cool and dry during hot summer rides, the gloves are constructed of strong and abrasion-resistant mesh stretch fabrics combined with a high-tech TPR knuckle protector that is designed to direct the airflow into the glove and onto the hands of the rider. Multiple perforation holes on the outside and inside increase the breathability even more. For additional protection, we added TPR protectors on the fingers and thumbs; providing a high level of protection without compromising on comfort or flexibility. A TPR palm slider ensures a controlled slide in case of an unfortunate mishap. The gloves can easily be put on thanks to the handy pull tab on the cuff and then secured with the hook-and-loop wrist strap. Adjusting your route during your journey is a breeze thanks to the integrated Connect Finger Tip which makes it possible to control your touchscreen device while leaving your gloves on. Enjoy the summer breeze with the Sand 4 Ladies gloves.

Features

Connect Finger Tip
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.

Grip panel at palm
This part at the inside of the knees gives you extra grip for ultimate control in the corners. It also protects the leather from wear and tear.

Outside stitching
The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.

Pull tab
Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone

Regular cuff

REV'IT! SAND 4 GLOVES - GREY-BLACK

$187.00 $129.00 Save $58.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight, comfortable, ventilated adventure riding gloves

Ventilated / Keeps you cool
Ready for adventure
Provides great grip/feel on the handlebar

Description

Although the Sand 4 gloves have been designed to create a perfect match with the Sand 4 H2O outfit, these gloves are bound to become the go-to gloves for a large audience of adventure riders across the globe. This pair of hand protection has been specifically designed and engineered for summer use, providing optimal grip, breathability, and ventilation. To make sure your hands stay cool and dry during hot summer rides, the gloves are constructed of strong and abrasion-resistant mesh stretch fabrics combined with a high-tech TPR knuckle protector that is designed to direct the airflow into the glove and onto the hands of the rider. Multiple perforation holes on the outside and inside increase the breathability even more. For additional protection, we added TPR protectors on the fingers and thumbs; providing a high level of protection without compromising comfort or flexibility. A TPR palm slider ensures a controlled slide in case of an unfortunate mishap. The gloves can easily be put on thanks to the handy pull tab on the cuff and then secured with the hook-and-loop wrist strap. Adjusting your route during your journey is a breeze thanks to the integrated Connect Finger Tip which makes it possible to control your touchscreen device while leaving your gloves on. Enjoy the summer breeze with the Sand 4 gloves.

Features

Connect Finger Tip
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.

Grip panel at palm
This part at the inside of the knees gives you extra grip for ultimate control in the corners. It also protects the leather from wear and tear.

Outside stitching
The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.

Pull tab
Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone

Regular cuff

REV'IT! SAND 4 GLOVES - BLACK

$187.00 $129.00 Save $58.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

Although the Sand 4 gloves have been designed to create a perfect match with the Sand 4 H2O outfit, these gloves are bound to become the go-to gloves for a large audience of adventure riders across the globe. This pair of hand protection has been specifically designed and engineered for summer use, providing optimal grip, breathability, and ventilation. To make sure your hands stay cool and dry during hot summer rides, the gloves are constructed of strong and abrasion-resistant mesh stretch fabrics combined with a high-tech TPR knuckle protector that is designed to direct the airflow into the glove and onto the hands of the rider. Multiple perforation holes on the outside and inside increase the breathability even more. For additional protection, we added TPR protectors on the fingers and thumbs; providing a high level of protection without compromising comfort or flexibility. A TPR palm slider ensures a controlled slide in case of an unfortunate mishap. The gloves can easily be put on thanks to the handy pull tab on the cuff and then secured with the hook-and-loop wrist strap. Adjusting your route during your journey is a breeze thanks to the integrated Connect Finger Tip which makes it possible to control your touchscreen device while leaving your gloves on. Enjoy the summer breeze with the Sand 4 gloves.

Features

Connect Finger Tip
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.

Grip panel at palm
This part at the inside of the knees gives you extra grip for ultimate control in the corners. It also protects the leather from wear and tear.

Outside stitching
The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.

Pull tab
Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone

Regular cuff

ARAI HELMETS

ARAI XD-5 HELMET - MOJAVE SAGE

$1,376.00

ARAI XD-5 HELMET - BLACK FROST

$1,376.00

ARAI CONTOUR-X HELMET - DIAMOND WHITE

$1,236.00

ARAI REGENT-X HELMET - BLACK FROST

$910.00

ARAI REGENT-X HELMET - MODERN GRAY

$910.00

Sold Out

ARAI VAS-A SHIELD, MAX-VISION - DARK SMOKE

$117.00

Sold Out

ARAI VAS-V SHIELD, MAX-VISION - DARK SMOKE

$94.00

ARAI VAS-V MAXVISION PINLOCK 120XLT FOG-RESISTANT INSERT LENS - CLEAR

$55.00

View all

View all
8 products

ARAI XD-5 HELMET - MOJAVE SAGE

$1,376.00

The XD-5 is a completely redesigned helmet, packed with many new features. As with everything from Arai, every improvement is made with a priority for protection. And this new model brings us ever closer to the ideal Arai shape for protection.

One of the biggest changes is the visor system and its visor. The new VAS-A visor system, derived from the VAS-V system originally developed for the Corsair-X, has been designed to maximize Glancing-Off performance, meaning more surface area to glance off impact energy whilst offering easy installation and removal of the visor and peak. The visor itself has been redesigned for increased visibility and Glancing-Off performance, and is now a Max Vision visor, so a Pinlock insert can easily be installed. The new VAS-A visor system also makes it easier to switch, without tools, to one of the other styles. You can choose between Adventure, Off-road and On-road.

Would you like to see how to change your XD-5 Shield, change your cheek pads, change out your chin strap cover, other details of your XD-5? For all of our "How To" videos on the XD-5, please click this link to find all of our informational videos for the XD-5 .

XD-5 FIT

Arai is the only company offering multiple interior-fit shapes to better address the infinite variety of riders’ head shapes and sizes.

No one pays more attention to the subtle variations and infinite possibilities of the human head shape than Arai. Why? Because it’s the secret to getting the best comfort and fit.

So for more than three decades, Arai has pioneered different shapes – and even different proportions within those shapes – in our various helmet models, working to offer a better fit for more people.

The XD-5 has Arai's INTERMEDIATE OVAL (IO) interior fit shape.

XD-5 PEAK

The all-new peak is designed for more effective ventilation, increased high speed flow-through performance, greater range of adjustability for blocking the sun, and is more resistant to buffeting, all of which leads to an overall more comfortable riding experience.

THREE DISTINCT CONFIGURATIONS

The XD-5 offers three distinct configurations depending on rider preference or riding conditions. Change the look every time you ride, or even during the same ride.

The XD-5 has the option to use just the shield for street use, just the peak (with a set of your favorite goggles) for off-road use, and the shield and peak combined to create a truly multi-functional ADV helmet.

ALL-NEW SHELL AND VAS-A SHIELD SYSTEM

The new VAS-A Max Vision system allows for easier and faster shield swaps. The shield can be attached or removed without the need for any tools. The peak utilizes only one screw on each side for removal/installation.

The amount of energy that any helmet can absorb is limited and we believe in a crash the only option is to have the helmet glance in a way that directs the impact energy away from the inside of the helmet. The shell of the XD-5 is designed to be round, smooth, and strong so that it can more easily ‘glance off’ impact energy in an actual crash.

CHIN VENT

The opening area for the XD-5 mouth-shutter is double the size compared to the XD-4. Thanks to the evolution in shell strength from the previous generation, the aperture could be made larger, and the mouth shutter could be made to flow more fresh air without the need for the mesh vents as seen on its predecessors.

INNER SHUTTER

Working in conjunction with the mouth shutter, the inner shutter allows you to adjust the amount of airflow entering the helmet. If the inner and outer shutters are both open, the air will be directed towards your mouth. If the outer shutter is open and the inner closed, the air will be directed towards the shield and help to reduce fogging.

FRONT LOGO VENT

The effectiveness of conventional forehead vents could be limited by the rider's position, but with the front logo duct, airflow is unaffected by changes in riding position. Thanks to advances in shell technology, we can add holes in the forehead area for this vent without compromising the helmet's ability to protect.

AR SPOILER

Set in a position that makes it ideal for adventure riding, the AR spoiler contributes to reducing fatigue from turbulent air throughout long rides and works to draw out hot air from the crown area.

VAS-A MAX VISION SHIELD PIN-LOCK

The new max-vision shield preserves the wide field-of-view and high level of visibility expected of an XD model. The Pinlock insert for this model has advanced to be effective at resisting fogging, even in extreme conditions, across the entire field of view.

*The Pinlock insert is an optional accessory, with one included in the box upon helmet purchase.

ODOR-RESISTANT INTERIOR

The XD-5 utilizes an interior liner that has the same level of acidity as bare skin and has odor-resistant and stain-resistant properties. The headliner is equipped with a removable foam layer on both the left and right sides for temples and a removable foam layer in the rear of the head-liner, allowing you to remove 5mm of foam if desired for exceptional micro-fitting adjustability.

*Once micro-fit pads are removed they cannot be replaced.

AIR FLAP

The retractable pull-down spoiler reduces wind intrusion into the bottom of the helmet and helps to pull out hot and humid exhaled air around the sculpted leading edges of the cheek pads. This coordinated ventilation, combined with fresh intake from the chin vent, also helps to reduce shield fogging.

*Optional ES Chin Cover can be used, but not included.

COMMUNICATIONS DEVICE CAPABILITY

The Hyper-Ridge® has been re-sculpted to provide a flat surface on the sides to allow for the easy installation of a wide range of communication devices. This increases the bonding surface between the device and the helmet and helps to reduce buffeting or possible slip-offs.

SPEAKER POCKET

Speakers can be installed directly to the provided hook & loop panel without the need to remove the cheek pad covers. Both ear pockets are deep and wide, designed to accommodate thicker speakers with plenty of room to position them to increase comfort.

NECK ROLL WIRE POCKET

A pocket to tuck away excess wiring and connectors as well as holes to easily run wires from side to side, have been incorporated into the neck roll to prevent wires coming loose while putting on or taking off the helmet. These features provide a smart way to tackle cable management inside your helmet.

ARAI XD-5 HELMET - BLACK FROST

$1,376.00

The XD-5 is a completely redesigned helmet, packed with many new features. As with everything from Arai, every improvement is made with a priority for protection. And this new model brings us ever closer to the ideal Arai shape for protection.

One of the biggest changes is the visor system and its visor. The new VAS-A visor system, derived from the VAS-V system originally developed for the Corsair-X, has been designed to maximize Glancing-Off performance, meaning more surface area to glance off impact energy whilst offering easy installation and removal of the visor and peak. The visor itself has been redesigned for increased visibility and Glancing-Off performance, and is now a Max Vision visor, so a Pinlock insert can easily be installed. The new VAS-A visor system also makes it easier to switch, without tools, to one of the other styles. You can choose between Adventure, Off-road and On-road.

Would you like to see how to change your XD-5 Shield, change your cheek pads, change out your chin strap cover, other details of your XD-5? For all of our "How To" videos on the XD-5, please click this link to find all of our informational videos for the XD-5 .

XD-5 FIT

Arai is the only company offering multiple interior-fit shapes to better address the infinite variety of riders’ head shapes and sizes.

No one pays more attention to the subtle variations and infinite possibilities of the human head shape than Arai. Why? Because it’s the secret to getting the best comfort and fit.

So for more than three decades, Arai has pioneered different shapes – and even different proportions within those shapes – in our various helmet models, working to offer a better fit for more people.

The XD-5 has Arai's INTERMEDIATE OVAL (IO) interior fit shape.

XD-5 PEAK

The all-new peak is designed for more effective ventilation, increased high speed flow-through performance, greater range of adjustability for blocking the sun, and is more resistant to buffeting, all of which leads to an overall more comfortable riding experience.

THREE DISTINCT CONFIGURATIONS

The XD-5 offers three distinct configurations depending on rider preference or riding conditions. Change the look every time you ride, or even during the same ride.

The XD-5 has the option to use just the shield for street use, just the peak (with a set of your favorite goggles) for off-road use, and the shield and peak combined to create a truly multi-functional ADV helmet.

ALL-NEW SHELL AND VAS-A SHIELD SYSTEM

The new VAS-A Max Vision system allows for easier and faster shield swaps. The shield can be attached or removed without the need for any tools. The peak utilizes only one screw on each side for removal/installation.

The amount of energy that any helmet can absorb is limited and we believe in a crash the only option is to have the helmet glance in a way that directs the impact energy away from the inside of the helmet. The shell of the XD-5 is designed to be round, smooth, and strong so that it can more easily ‘glance off’ impact energy in an actual crash.

CHIN VENT

The opening area for the XD-5 mouth-shutter is double the size compared to the XD-4. Thanks to the evolution in shell strength from the previous generation, the aperture could be made larger, and the mouth shutter could be made to flow more fresh air without the need for the mesh vents as seen on its predecessors.

INNER SHUTTER

Working in conjunction with the mouth shutter, the inner shutter allows you to adjust the amount of airflow entering the helmet. If the inner and outer shutters are both open, the air will be directed towards your mouth. If the outer shutter is open and the inner closed, the air will be directed towards the shield and help to reduce fogging.

FRONT LOGO VENT

The effectiveness of conventional forehead vents could be limited by the rider's position, but with the front logo duct, airflow is unaffected by changes in riding position. Thanks to advances in shell technology, we can add holes in the forehead area for this vent without compromising the helmet's ability to protect.

AR SPOILER

Set in a position that makes it ideal for adventure riding, the AR spoiler contributes to reducing fatigue from turbulent air throughout long rides and works to draw out hot air from the crown area.

VAS-A MAX VISION SHIELD PIN-LOCK

The new max-vision shield preserves the wide field-of-view and high level of visibility expected of an XD model. The Pinlock insert for this model has advanced to be effective at resisting fogging, even in extreme conditions, across the entire field of view.

*The Pinlock insert is an optional accessory, with one included in the box upon helmet purchase.

ODOR-RESISTANT INTERIOR

The XD-5 utilizes an interior liner that has the same level of acidity as bare skin and has odor-resistant and stain-resistant properties. The headliner is equipped with a removable foam layer on both the left and right sides for temples and a removable foam layer in the rear of the head-liner, allowing you to remove 5mm of foam if desired for exceptional micro-fitting adjustability.

*Once micro-fit pads are removed they cannot be replaced.

AIR FLAP

The retractable pull-down spoiler reduces wind intrusion into the bottom of the helmet and helps to pull out hot and humid exhaled air around the sculpted leading edges of the cheek pads. This coordinated ventilation, combined with fresh intake from the chin vent, also helps to reduce shield fogging.

*Optional ES Chin Cover can be used, but not included.

COMMUNICATIONS DEVICE CAPABILITY

The Hyper-Ridge® has been re-sculpted to provide a flat surface on the sides to allow for the easy installation of a wide range of communication devices. This increases the bonding surface between the device and the helmet and helps to reduce buffeting or possible slip-offs.

SPEAKER POCKET

Speakers can be installed directly to the provided hook & loop panel without the need to remove the cheek pad covers. Both ear pockets are deep and wide, designed to accommodate thicker speakers with plenty of room to position them to increase comfort.

NECK ROLL WIRE POCKET

A pocket to tuck away excess wiring and connectors as well as holes to easily run wires from side to side, have been incorporated into the neck roll to prevent wires coming loose while putting on or taking off the helmet. These features provide a smart way to tackle cable management inside your helmet.

ARAI CONTOUR-X HELMET - DIAMOND WHITE

$1,236.00

New for 2023, the Contour-X is designed for the modern motorcycle rider and aimed at a brand-new generation of riders who desire dynamic race-derived performance and all-day comfort on the road.

Extensive work by the R&D team in the lab, on the road, and out on the racetrack, with the ever-present goal of creating a full-featured, exceptional new Arai helmet, the Contour-X comes with unmatched performance, but with room for a stylish new look that provides a high level of comfort and protection over thousands of miles.

CONTOUR-X FIT

Arai is the only company offering multiple interior-fit shapes to better address the infinite variety of riders’ head shapes and sizes.

No one pays more attention to the subtle variations and infinite possibilities of the human head shape than Arai. Why? Because it’s the secret to getting the best comfort and fit.

So for more than three decades, Arai has pioneered different shapes – and even different proportions within those shapes – in our various helmet models, working to offer a better fit for more people.

The Contour-X has Arai's INTERMEDIATE OVAL (IO) interior fit shape.*

*A Helmet needs to be tried on in order to determine a proper fit.

VAS-V Shield Mechanism

The Contour-X has the new VAS mechanism with a variable axis incorporating a moving pivot point. By combining the pin trajectory, which is based on an imaginary axis, with the two trajectories of the double pivot point slot, the shield opens and closes smoothly even with the much lower shield mount position.

A dual-function lever releases both the side cover/pod and shield pin for quick and simple shield removal. Being able to see the shield mechanism allows for easier shield changes.

3D ARAI LOGO DUCT

Immediately noticeable, the new 3D Arai logo duct (made as thin as possible, just 3.5mm in depth) feeds two central 10mm intake ports. This is a first in an Arai, and entirely due to PB-cLc2’s strength and the shell construction.

It also works very well at low speed and with an upright riding position; at just 31mph it’s channelling an extra 40% airflow, at 74.5mph, 7%. It can also be opened, or closed, quickly with summer or winter gloves, via a short-stroke lever placed at the top; if the rider can’t see the lever and the logo is in its normal place, the duct is open. The Arai logo duct is designed to break away in the event of an impact.

AERODYNAMIC REAR SPOILER WITH ONE PIECE EXHAUST FUNCTION

The one-piece aerodynamic rear exhaust/spoiler, operated by a 3-way switch, is inspired by the DF-X2 of the Corsair-X, but redesigned for touring use – however, it was tested up to 300km/h at Suzuka. It sits a little more forward on the shell and is fed by 3 ports in the shell. As part of Contour-X’s comprehensive ventilation system it efficiently draws air but also smooths airflow over (and from the side) of the helmet, improving stability and reducing buffeting, especially while overtaking at highway speeds. The result is much less rider fatigue. Manufactured as thin and light as possible it’s designed to crush or break away upon impact, therefore having no influence on protective performance.

AIR-SCOOP CHIN VENT

Also new is the 3-position (open, midway, and closed) sliding air-scoop chin vent which flows a larger intake volume of air and has a replaceable filter. The actuating mechanism is thicker and easy to use with gloves.

INTERCOM ACCOMMODATION

Designed to fit and connect a communication system easily on the shell exterior – and without any compromise to the protection offered by the inner EPS liner.

OUTER SHELL: PB-cLc2 (PERIPHERALLY BELTED COMPLEX LAMINATE CONSTRUCTION)

The Contour-X outer shell design outlines a stylish, organic shape and uses PB-cLc2 for lightweight strength. The AR-mat has been substituted with a new material which makes it possible to reduce the weight, while maintaining strength. An extra layer of Super Fiber belting maintains rigidity in a crucial area while offering fl at sides for easy fi tment of an intercom system.

5MM WIDER OPENING

The exclusive shell fl ares 5mm around the opening, making it easier to get the helmet on and off (for newcomers to Arai the initial ‘snugness’ when putting the helmet on or taking it off can be challenging).

NECK ROLL WIRE POCKET

A small stitched opening on the inside of the neck roll allows the intercom system installer to easily tuck away any excess wiring that may be left-over after installing the speakers. For a nice, clean final look and ride.

ARAI REGENT-X HELMET - BLACK FROST

$910.00

The all-new Arai Regent-X is designed to isolate you from distractions with the kind of comfort only Arai can deliver. Built with the same protection as our flagship Corsair-X model, the Regent-X features a new interior for both comfort and ease of taking it on and off.

REGENT-X FIT

Arai is the only company offering multiple interior-fit shapes to better address the infinite variety of riders’ head shapes and sizes.

No one pays more attention to the subtle variations and infinite possibilities of the human head shape than Arai. Why? Because it’s the secret to getting the best comfort and fit.

So for more than three decades, Arai has pioneered different shapes – and even different proportions within those shapes – in our various helmet models, working to offer a better fit for more people.

The Regent-X has Arai's INTERMEDIATE OVAL (IO) interior fit shape.

VAS SHIELD SYSTEM

The Variable Axis System shield mechanism was developed to enhance the shape of the shell, but the easy to learn changing mechanism is what most people are raving about. Quick, easy and intuitive.

IMPROVED SHIELD LATCH

The VAS latch captures and securely holds the shield closed to help prevent unexpected opening. In addition to the de-mist function, the larger latch allows for intuitive and seamless shield operation.

IMPROVED GLANCE OFF ABILITY

The VAS pivot cover is now smaller and lower than the previous design, yielding an average of 24mm more area above the cover. The shell is now smoother along the Snell test line in the temple area, thus increasing the helmet’s ability to glance off objects during an impact.

Compared with the shell of the Corsair-V, the smooth area around the temple is increased by an average of 24mm on the new VAS model. Having a rounder, smoother, stronger shell to improve glance off ability.

PB-CLC SHELL

Born from Arai’s exclusive Formula One helmet technology, the Peripherally Belted Complex Laminate Construction shell is developed to be both light and strong. The upper edge of the eye port is reinforced with Arai’s Peripheral Belt, custom woven in-house with proprietary super fibers to increase shell strength without adding thickness or weight.

ONE-PIECE MULTI-DENSITY LINER

A one-piece multi-density liner, tuned with varying densities according to the position and volume of each given area within each shell size, provides protection where it’s needed most, and allows Arai to make a compact helmet that puts protection first, and is as aerodynamic and light as possible.

INTERIOR: SEMI-REMOVABLE LINER

The top padding stays in place but the liner is fixed with Velcro and easily removed for cleaning.

INTERIOR: REPLACEABLE CHEEK PADS/EAR CUPS

Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.

COMFORT: 5MM WIDER BASE

The exclusive shell flares 5mm around the base, making it easier to get the helmet on and off (for newcomers to Arai the initial ‘snugness’ when putting the helmet on or taking it off can be challenging).

REAR VENTILATION: ONE-PIECE REAR EXHAUST

Extracts more hot air from the helmets interior and improves aerodynamics.

REAR VENTILATION: SIDE EXHAUSTS

Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance.

REAR VENTILATION: NECK EXHAUST VENT

To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet.

CHIN CURTAIN

Attached to the bottom of the helmet, the new chin curtain helps to further accentuate the Egg-shape form. The curtain simultaneously blocks air intrusion from turbulent air below and increases negative pressure to enhance the exhaust function of FFS by drawing more air from the mouth area. The improved airflow reduces noise even further.

FACIAL CONTOUR SYSTEM (FCS)

To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure.

TESTED

The Regent-X, along with all Arai models available in North America, meets or exceeds the SNELL M2020 standard, but only after they all first satisfy Arai's stringent in-house criteria.

ARAI REGENT-X HELMET - MODERN GRAY

$910.00

The all-new Arai Regent-X is designed to isolate you from distractions with the kind of comfort only Arai can deliver. Built with the same protection as our flagship Corsair-X model, the Regent-X features a new interior for both comfort and ease of taking it on and off.

REGENT-X FIT

Arai is the only company offering multiple interior-fit shapes to better address the infinite variety of riders’ head shapes and sizes.

No one pays more attention to the subtle variations and infinite possibilities of the human head shape than Arai. Why? Because it’s the secret to getting the best comfort and fit.

So for more than three decades, Arai has pioneered different shapes – and even different proportions within those shapes – in our various helmet models, working to offer a better fit for more people.

The Regent-X has Arai's INTERMEDIATE OVAL (IO) interior fit shape.

VAS SHIELD SYSTEM

The Variable Axis System shield mechanism was developed to enhance the shape of the shell, but the easy to learn changing mechanism is what most people are raving about. Quick, easy and intuitive.

IMPROVED SHIELD LATCH

The VAS latch captures and securely holds the shield closed to help prevent unexpected opening. In addition to the de-mist function, the larger latch allows for intuitive and seamless shield operation.

IMPROVED GLANCE OFF ABILITY

The VAS pivot cover is now smaller and lower than the previous design, yielding an average of 24mm more area above the cover. The shell is now smoother along the Snell test line in the temple area, thus increasing the helmet’s ability to glance off objects during an impact.

Compared with the shell of the Corsair-V, the smooth area around the temple is increased by an average of 24mm on the new VAS model. Having a rounder, smoother, stronger shell to improve glance off ability.

PB-CLC SHELL

Born from Arai’s exclusive Formula One helmet technology, the Peripherally Belted Complex Laminate Construction shell is developed to be both light and strong. The upper edge of the eye port is reinforced with Arai’s Peripheral Belt, custom woven in-house with proprietary super fibers to increase shell strength without adding thickness or weight.

ONE-PIECE MULTI-DENSITY LINER

A one-piece multi-density liner, tuned with varying densities according to the position and volume of each given area within each shell size, provides protection where it’s needed most, and allows Arai to make a compact helmet that puts protection first, and is as aerodynamic and light as possible.

INTERIOR: SEMI-REMOVABLE LINER

The top padding stays in place but the liner is fixed with Velcro and easily removed for cleaning.

INTERIOR: REPLACEABLE CHEEK PADS/EAR CUPS

Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.

COMFORT: 5MM WIDER BASE

The exclusive shell flares 5mm around the base, making it easier to get the helmet on and off (for newcomers to Arai the initial ‘snugness’ when putting the helmet on or taking it off can be challenging).

REAR VENTILATION: ONE-PIECE REAR EXHAUST

Extracts more hot air from the helmets interior and improves aerodynamics.

REAR VENTILATION: SIDE EXHAUSTS

Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance.

REAR VENTILATION: NECK EXHAUST VENT

To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet.

CHIN CURTAIN

Attached to the bottom of the helmet, the new chin curtain helps to further accentuate the Egg-shape form. The curtain simultaneously blocks air intrusion from turbulent air below and increases negative pressure to enhance the exhaust function of FFS by drawing more air from the mouth area. The improved airflow reduces noise even further.

FACIAL CONTOUR SYSTEM (FCS)

To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure.

TESTED

The Regent-X, along with all Arai models available in North America, meets or exceeds the SNELL M2020 standard, but only after they all first satisfy Arai's stringent in-house criteria.

ARAI VAS-V MAXVISION PINLOCK 120XLT FOG-RESISTANT INSERT LENS - CLEAR

$55.00

The 100% Max Vision Pinlock 120 fog resistant insert lens for the Arai is developed to be used in high demanding conditions such as on the racetrack or adventure riding. The Pinlock 120 insert lens has proven its extreme performance in premier racing series like MotoGP, WSBK, Formula 1 and more.

Our top of the line fog resistant solution for professionals, developed to eliminate fogging in demanding weather conditions. The Pinlock 120 creates a double shield system through a silicon seal between the helmet face shield and Pinlock insert lens, which makes up a double glass type of solution that prevents fogging. The insert is made of a moisture absorbing plastic and therefore, the surface basically dry when used. This air-tight pocket ensures that the difference in temperature becomes significantly lowered. The Pinlock insert absorbs moisture on the inside and offers you continuous clear visibility.

100% Max Vision
100% Max Vision Pinlock 120 insert lens is compatible with the Arai VAS-V IC stamped on the face shield and that are Pinlock prepared.

Compatible models: Corsair-X, Signet-X, Quantum-X, Defiant-X, Regent-X

SKU: 01-1057C-120

ARAI VAS-V MAXVISION PINLOCK 120XLT FOG-RESISTANT INSERT LENS - CLEAR

Rev'it! dirt series

REV'IT! COMPONENT 2 H20 JACKET - AUBERGINE

$781.00

REV'IT! COMPONENT 2 H20 JACKET - BROWN

$781.00

REV'IT! COMPONENT 2 H20 JACKET - BLACK

$781.00

Sale

REV'IT! COMPONENT JACKET - BLACK - M, XXL - SALE!

$770.00 $502.00 Save $268.00

REV'IT! BLACKWATER 2 H20 SMOCK - BLACK-ORANGE

$770.00

REV'IT! BLACKWATER 2 H20 SMOCK - BLACK

$770.00

REV'IT! TRAIL VEST

REV'IT! PROTEUS PROTECTOR JACKET

$373.00

REV'IT! SURFACE JACKET - BROWN

$618.00

REV'IT! COMPONENT H20 PANTS - BLACK

$758.00

REV'IT! CONTINENT PANTS - BROWN

REV'IT! CONTINENT PANTS - BLACK

REV'IT! SURFACE PANTS - BLACK

$630.00

REV'IT! EXPEDITION GTX BOOTS

$1,283.00

REV'IT! CONTINENT WB JACKET - BLACK

$548.00

REV'IT! CONTINENT WB JACKET - MID GREY

$548.00

REV'IT! PENINSULA PANTS - BLACK

REV'IT! PENINSULA PANTS - DARK NAVY

REV'IT! PENINSULA PANTS - CAMO GREY

REV'IT! DISCOVERY GTX BOOT-BROWN

$898.00

View all

View all
51 products

REV'IT! COMPONENT JACKET - BLACK - M, XXL - SALE!

$770.00 $502.00 Save $268.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, waterproof, lightweight, comfortable, active fit off-road jacket

Meet the pinnacle product of REV'IT'S DIRT Series off-road collection: The Component Jacket. It’s the go-to, full-zippered jacket for the off-road rider that needs a CE-certified, lightweight, comfortable, active-fitting, and waterproof garment for all adventures on the trails. The hard shell construction is made from a flexible & waterproof stretch ripstop fabric, along with Cordura® ripstop at the shoulders & arms for increased abrasion resistance. REVIT's open-structured SEESMART™ CE-level 1 protectors found at the shoulders & elbows provide the rider’s necessary armor, plus you can add the REV'IT! Slingshot Back Protector. Alternatively, the CE-level 1 elbow and shoulder protectors can be easily removed if the rider wants to *upgrade their protection by wearing REVIT's body-hugging Proteus protector jacket (with CE-level 1 & 2 protectors) underneath. Ventilation zippers at the lower & upper arms keep riders cool while a detachable hood/storm collar keeps the rider dry off the bike and can be stored in the back pocket when taken off/not in use.

*Make sure the included SEESMART™ armor is removed before upgrading the protection otherwise the ideal fit won’t be achieved & discomfort may ensue.

REV'IT! COMPONENT JACKET - BLACK - M, XXL - SALE!

REV'IT! PROTEUS PROTECTOR JACKET

$373.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight, breathable protector underjacket/jersey jacket

REV'ITs lightweight & breathable Proteus protector jacket functions as an upgrade for the DIRT Series collection, which is worn under the jersey or various jackets we offer. Ideal stretch, ventilation, & armor allow you to ride protected on the trails less travelled. It’s constructed with a combination of densely woven Hicom mesh on the shoulders, a 2-way spandex mesh body, and PWR|Stretch mesh on the inner area of the sleeves. This combination provides optimal support, airflow, and flexibility. Furthermore, it features our award-winning SEEFLEX™ CE-level 2 protection at the shoulders and elbows. It is also equipped with a SEESOFT™ CE-level 2 back protector and SEESOFT™ CE-level 1 protectors at the chest. Thumb loops at the cuffs along with the stretch cuff will make sure the sleeves won’t slide when you’re putting it on or during riding.

Lining: 3D mesh
Features

Integrated kidney belt
Stretchable cuff
Stretch at back
Stretch at front
Stretch at inside arms
Thumb loops
Outer shell material: Mesh/Stretch mesh

Protection

3D mesh protector pockets
SEEFLEX™ CE-level 2 Elbow Protectors: Certified CE-Level 2 according to the new norm EN1621-1:2012 the SEEFLEX™ protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX™ protectors easily surpass the new norm without sacrificing wearer comfort.
SEEFLEX™ CE-level 2 Shoulder Protectors: Certified CE-Level 2 according to the new norm EN1621-1:2012 the SEEFLEX™ protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX™ protectors easily surpass the new norm without sacrificing wearer comfort.
SEESOFT™ at ribcage
SEESOFT™ CE-level 1 Divided Chest Protectors
SEESOFT™ CE-level 2 Back Protector: The SEESOFT™ CE-Level 2 back protector insert is designed to absorb variable impacts without compromising on comfort, ventilation or freedom of movement.

Certification

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved CU rating. For more details about certification click here.

REV'IT! PROTEUS PROTECTOR JACKET SIZE CHART

REV'IT! COMPONENT H20 PANTS - BLACK

$758.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, waterproof, knee brace-ready, lightweight off-road pants

Take on any adventure in any weather with our CE-certified and waterproof, active fit, over-the-boot Component H2O hard shell pants. The outer shell is made of the rugged abrasion-resistant CORDURA® ripstop fabric laminated with our waterproof hydratex® membrane. PWR|Shell Ripstop stretch is used on the inside of the legs and upper knees for maximum flexibility and comfort. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle. A removable thermal liner will keep the rider comfortable and warm in lower temperatures. Protection is provided by our removable SEESMART™ CE-level 1 protectors at the hips and knees. Furthermore, the knee construction is designed to work with knee braces or our Scram knee protector sock – with the SEESMART™ protectors first removed, of course. For convenience purposes, the upper legs are equipped with cargo pockets as well as waterproof ventilation zippers to cool the rider down in warm weather. To get the right fit every time, we have equipped these pants with a ratchet waist closure, along with a silicon waistband to keep the pants from sliding down. Adjustment tabs on the calves provide plenty of adjustability to complement any type of motorcycle boots. A grip patch will ensure that the rider will not slide off the seat when it is wet or dry. Additionally, the lower legs are equipped with a special gator that goes over the boot to block out water and mud. Ride long and far with the Component H2O pants.

REV'IT! CONTINENT PANTS - BROWN

$583.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, over-boot, off-road, lightweight, flexible riding pants

Enjoy endless off-road exploration on two wheels with our CE-certified and splash proof, active fit over-the-boot Continent hard shell pants – as part of our DIRT Series collection. On the inside of the legs and upper knees, the Continent has been engineered with the rugged abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch for maximum flexibility and comfort. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle. Protection is provided by our removable SEESMART™ CE-level 1 protectors at the hips and knees. Furthermore, the knee construction is designed to work with knee braces or our Scram knee protectors – with the SEESMART™ protectors first removed, of course. For convenience purposes, the upper legs are equipped with cargo pockets for added storage options, and ventilation zippers to cool the rider down. For the right fit, we’ve included a ratchet waist closure, along with a silicon waistband to keep the pants from sliding down. Additionally, the lower legs are equipped with a special gator that goes over the boot to block out water and mud.

REV'IT! CONTINENT PANTS - BLACK

$583.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, over-boot, off-road, lightweight, flexible riding pants

Enjoy endless off-road exploration on two wheels with our CE-certified and splash proof, active fit over-the-boot Continent hard shell pants – as part of our DIRT Series collection. On the inside of the legs and upper knees, the Continent has been engineered with the rugged abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch for maximum flexibility and comfort. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle. Protection is provided by our removable SEESMART™ CE-level 1 protectors at the hips and knees. Furthermore, the knee construction is designed to work with knee braces or our Scram knee protectors – with the SEESMART™ protectors first removed, of course. For convenience purposes, the upper legs are equipped with cargo pockets for added storage options, and ventilation zippers to cool the rider down. For the right fit, we’ve included a ratchet waist closure, along with a silicon waistband to keep the pants from sliding down. Additionally, the lower legs are equipped with a special gator that goes over the boot to block out water and mud.

REV'IT! EXPEDITION GTX BOOTS

$1,283.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

We’ve made our award-winning ADV motorcycle boots even better and here’s how. They combine the protection of MX boots with breathable GORE-TEX Performance Comfort waterproofing and unsurpassed comfort on and off the bike. Furthermore, the solution to reaching the next level of protection without sacrificing next-level rider comfort was the development of the Dynamic Support Frame (DSF).

The REV’IT!|DSF ensures maximum freedom of movement in the ankle and prevents hyper extension of the tendons and muscles. The DSF system, reinforced toe box, SEESOFT in the tongue and hard shell shin plate all work together to protect your feet from impacts. The specially developed Vibram® Apex sole provides maximum grip, stability, and control while riding and walking.

To tighten the Expedition GTX motorcycle boots, we’ve incorporated the unique BOA® closure system to facilitate a perfect fit. It’s also extremely fast in operation and contributes to the overall lightweight characteristics of the Expedition boot. The included OrthoLite® insole makes the boot very comfortable on and off the bike.

Experience the top-level REV’IT! Expedition GTX motorcycle boots. Unparalleled comfort, freedom, and safety all wrapped in one technically advanced package.

REV'IT! CONTINENT WB JACKET - BLACK

$548.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, Windbreaking, softshell, off-road riding jacket with removable sleeves

The Continent WB jacket is a tactical, high-tech, adventure-ready jacket as part of our DIRT Series, but there’s much more to it than meets the eye. Engineered with serious adventure riding in mind, the Continent WB is made to adapt as conditions change.

For when the going gets rough
Designed and certified to be good to go, with SEESMART protection in charge of keeping your elbows and shoulders out of harm’s way and an insert pocket for a SEESOFT back protector, there’s also the possibility of removing the standard protection and slipping the Continent WB jacket over our CE-level 1 and Level 2 certified Proteus protector jacket for when the going gets rough.

Purposeful beyond looks and feel
Similarly, the full-stretch, softshell design looks and feels purposeful, but that’s before unzipping the sleeves for even more riding mobility and ventilation. Because the Continent WB is very much an in-between jacket, the removable sleeves are mated to the shoulders, as a comfortable double layer up top that comes off altogether, turning this mid-range temperature jacket into a full-blown, body-warming off-road riding vest in a matter of moments.

COMFORT FEATURES
Adjustability:
Adjustment drawcord at hem
Adjustment tab at cuffs
Pockets:
Inner pocket
Slit pocket at back
Two slit pockets on front
Features:
Detachable sleeves
Elastic key cord in pocket

CLIMATE FEATURES
Ventilation:
Perforation on upper front

PROTECTION FEATURES
Protection:
Prepared for SEESOFT™ CE-level 2 Insert Back Protector
SEESMART CE-level 1 Elbow Protectors
SEESMART CE-level 1 Shoulder Protectors
Outer shell material:
CORDURA® 750D ripstop
Visibility:
Laminated reflection at upper arms
Laminated reflection on back
Laminated reflective logo on back

CERTIFICATION
This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating. For more details about certification click here.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

REV'IT! PENINSULA PANTS - BLACK

$490.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, In-boot, off-road, lightweight, flexible riding pants

Meet the Peninsula. A purpose-built pair of active fit pants for riders who prefer to wear their gear tucked inside their boots instead of over them – as part of our DIRT Series collection. The CE-certified pants are constructed of highly abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch on the inside legs, lower legs, and upper knees. This allows for maximum movement and comfort. Our flexible, lightweight, and removable SEESMART™ CE-level 1 protectors are featured at the hips and knees. And when the SEESMART™ armour is removed from the knees, the pants can be worn over our CE-level 2 Scram knee protectors. The Peninsula is also patterned to accommodate aftermarket knee braces underneath. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle while optimal fit is ensured by the ratchet waist closure while the silicon waistband will keep the pants from sliding down. In warmer temperatures, the long ventilation zippers can be zipped open to cool down the rider. And in terms of keeping your essentials close by, storage is provided by cargo pockets at the upper legs.

REV'IT! PENINSULA PANTS - DARK NAVY

$490.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, In-boot, off-road, lightweight, flexible riding pants

Meet the Peninsula. A purpose-built pair of active fit pants for riders who prefer to wear their gear tucked inside their boots instead of over them – as part of our DIRT Series collection. The CE-certified pants are constructed of highly abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch on the inside legs, lower legs, and upper knees. This allows for maximum movement and comfort. Our flexible, lightweight, and removable SEESMART™ CE-level 1 protectors are featured at the hips and knees. And when the SEESMART™ armour is removed from the knees, the pants can be worn over our CE-level 2 Scram knee protectors. The Peninsula is also patterned to accommodate aftermarket knee braces underneath. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle while optimal fit is ensured by the ratchet waist closure while the silicon waistband will keep the pants from sliding down. In warmer temperatures, the long ventilation zippers can be zipped open to cool down the rider. And in terms of keeping your essentials close by, storage is provided by cargo pockets at the upper legs.

REV'IT! PENINSULA PANTS - CAMO GREY

$490.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, In-boot, off-road, lightweight, flexible riding pants

Meet the Peninsula. A purpose-built pair of active fit pants for riders who prefer to wear their gear tucked inside their boots instead of over them – as part of our DIRT Series collection. The CE-certified pants are constructed of highly abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch on the inside legs, lower legs, and upper knees. This allows for maximum movement and comfort. Our flexible, lightweight, and removable SEESMART™ CE-level 1 protectors are featured at the hips and knees. And when the SEESMART™ armour is removed from the knees, the pants can be worn over our CE-level 2 Scram knee protectors. The Peninsula is also patterned to accommodate aftermarket knee braces underneath. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle while optimal fit is ensured by the ratchet waist closure while the silicon waistband will keep the pants from sliding down. In warmer temperatures, the long ventilation zippers can be zipped open to cool down the rider. And in terms of keeping your essentials close by, storage is provided by cargo pockets at the upper legs.

REV'IT! DISCOVERY GTX BOOT-BROWN

$898.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Comfortable, easy to fit, and waterproof Adventure boots ready for worldwide travel on any surface.

The Discovery GTX motorcycle boots are designed for all-weather adventure riders who need the stability and safety of off-road boots, the features and user-friendliness of a tour boot, and the comfort of a trekking boot. We’ve equipped them with the waterproof and breathable GORE-TEX Performance Comfort membrane to keep your feet dry and feeling good in any type of weather.

To tighten the boots, we’ve incorporated the unique BOA® fit system to facilitate a perfect fit. It’s also extremely fast in operation and contributes to the overall lightweight characteristics of the Discovery GTX motorcycle boots. Furthermore, the impact absorbing protective reinforcements at the shin, ankle, heel, and toe offer top-notch protection without making any concessions. Together with Vibram®, we developed the Apex sole to achieve maximum grip, stability, and control while riding and walking. The included OrthoLite® insole makes the boot extremely comfortable.

Enjoy any journey in any weather on the bike and on foot with the Discovery GTX motorcycle boots.

BELL HELMETS

BELL BROOZER HELMET - DUPLET GLOSS NARDO GRAY

$397.00

BELL BROOZER HELMET - PRIME GLOSS WARM GRAY - L

$397.00

BELL ELIMINATOR HELMET - BLACK

BELL ELIMINATOR HELMET - MENACE GLOSS BLACK-WHITE

BELL ELIMINATOR HELMET - GT GLOSS BLACK/WHITE

BELL BULLITT - GLOSS BLACK

$630.00

BELL BULLITT - COMMAND (VINTAGE WHITE / OXBLOOD / BLUE)

$630.00

BELL BULLITT - TT GLOSS VINTAGE WHITE/OXBLOOD - SIZE L

SHOEI RF-1400 - MATTE BLACK

View all

View all
56 products

BELL BROOZER HELMET - DUPLET GLOSS NARDO GRAY

$397.00

FULL FACE. OPEN FACE. IN YOUR FACE.

A brutal combination of attitude, style, and functionality makes the Broozer a true streetfighter. Dual-certified for both full-face and open-face riding, the removable chin bar and integrated drop-down shield means the Broozer is ready for anything. Combine this with the Bell fit you love and a lean fighting weight of 1350 grams, and you have yourself a ringer. Availability, certification, color, and pricing may vary per region. If outside of the USA, please check with your authorized local dealer for more information.

SPECS

CONSTRUCTION	LIGHTWEIGHT LG® PC/ABS SHELL
SPORT	POWERSPORTS
VENTILATION	ADJUSTABLE SLIDER VENTS ON UPPER SHELL AND CHIN BAR
FIT SYSTEM	3 EPS SIZES FOR MAXIMUM COMFORT AND SIZE RANGE
CERTIFICATION	DOT (US) ECE (EU)
ANTI-FOG COATING	ANTI-FOG SHIELD

BELL BROOZER HELMET - DUPLET GLOSS NARDO GRAY

BELL BROOZER HELMET - PRIME GLOSS WARM GRAY - L

$397.00

FULL FACE. OPEN FACE. IN YOUR FACE.

A brutal combination of attitude, style, and functionality makes the Broozer a true streetfighter. Dual-certified for both full-face and open-face riding, the removable chin bar and integrated drop-down shield means the Broozer is ready for anything. Combine this with the Bell fit you love and a lean fighting weight of 1350 grams, and you have yourself a ringer. Availability, certification, color, and pricing may vary per region. If outside of the USA, please check with your authorized local dealer for more information.

SPECS

CONSTRUCTION	LIGHTWEIGHT LG® PC/ABS SHELL
SPORT	POWERSPORTS
VENTILATION	ADJUSTABLE SLIDER VENTS ON UPPER SHELL AND CHIN BAR
FIT SYSTEM	3 EPS SIZES FOR MAXIMUM COMFORT AND SIZE RANGE
CERTIFICATION	DOT (US) ECE (EU)
ANTI-FOG COATING	ANTI-FOG SHIELD

BELL BROOZER HELMET - PRIME GLOSS WARM GRAY - L

SHOEI HELMETS

SHOEI RF-SR MATTE BLACK

$840.00

$1,038.00

SHOEI NEOTEC 3 HELMET - MATTE BLACK

$1,551.00

SHOEI HORNET X2 MATTE BLACK - SIZE M

$1,189.00

Sale

SHOEI CW-1 SPECTRA BLUE SHIELD FOR QWEST, RF1100, X-12

$168.00 $145.00 Save $23.00

SHOEI CWR-1 PINLOCK DARK SMOKE SHIELD

$108.00

View all

View all
6 products

SHOEI RF-1400 - MATTE BLACK

$1,038.00

The Evolution of Perfection is a fitting tagline for the longest-standing, most decorated full-face helmet model in the SHOEI lineup, the RF. The process of improving is a constant evolution, and with a world-class team of designers and engineers leading the charge, we pushed our resources and technologies to the brink, utilizing our state-of-the-art wind tunnel facility, extensive array of proprietary materials, and the industry’s most stringent quality assurance practices to develop the all-new RF-1400. SHOEI’s lightest and most compact SNELL-approved full-face helmet model, the RF-1400 has evolved the pursuit of perfection to the next level.

GOLDTOP ENGLAND

GOLDTOP '72 EASY RIDER JACKET

GOLDTOP 1958 JACKET - WAXED BROWN (CE ARMOURED)

GOLDTOP 1958 JACKET - BLACK (CE ARMOURED)

Sold Out

GOLDTOP '76 CAFE RACER JACKET (CE ARMOURED) - OLIVE GREEN

GOLDTOP '76 CAFE RACER JACKET (CE ARMOURED) - OXBLOOD

Sold Out

GOLDTOP '76 CAFE RACER JACKET (CE ARMOURED) - BRITISH RACING GREEN

from $875.00

GOLDTOP '76 CAFE RACER JACKET (CE ARMOURED) - WAXED BROWN

from $816.00

GOLDTOP '76 CAFE RACER JACKET (CE ARMOURED) - BLACK

from $816.00

View all

View all
98 products

BEELINE MOTO - NAVIGATION SIMPLIFIED

BEELINE MOTO II SAT NAV GPS - GUN METAL GREY

$455.00

BEELINE MOTO II SAT NAV GPS - SILVER

$455.00

BEELINE MOTO II SAT NAV GPS - BLACK

$408.00

BEELINE MOTO II POWERED MOUNT INSERT

$117.00

BEELINE MOTO II BAR CLAMP MOUNT

BEELINE MOTO II CARRY CASE

Sold Out

$35.00

Sale

BEELINE MOTO BAR CLAMP MOUNT

$70.00 $59.00 Save $11.00

Sale

BEELINE MOTO RAM BALL MOUNT ADAPTER

$44.00 $35.00 Save $9.00

View all

View all
9 products

BEELINE MOTO II SAT NAV GPS - SILVER

$455.00

Introducing Moto II: the next-generation motorcycle navigation device.

Get to where you’re going, and have fun while you’re at it, with Moto II’s advanced turn-by-turn navigation, live ride stats and speedo.

Waterproof, shockproof, with a 14-hour battery life and available in three beautiful finishes - Black Plastic, Silver or Gunmetal Grey - Moto II is the perfect companion for any ride and integrates seamlessly into any bike cockpit.

What’s included:

Beeline Moto II/Moto II Metal device
USB-C Charging cable
Universal elastic strap mount
Quickstart guide

Beeline Moto II/Moto II Metal requires a smartphone and Bluetooth connection to operate.

Details

Superior Display: Enjoy a brighter, clearer view with Moto II’s enhanced screen—now with double the resolution and size, featuring colour display, anti-glare, and hydrophobic coatings for optimal visibility under any conditions.
Sleek Design: Tailor-made for your ride, Moto II boasts a stylish, pocket-friendly design with two bezel options to match your motorcycle’s look—rugged or retro.
Rugged Build: Waterproof and shockproof, Moto II is adventure-ready, designed to withstand the elements and the road's unpredictability.
Versatile Mounting: Fit Moto II on any bike with our expanded range of easy-to-install mounts, ensuring seamless integration into your cockpit.
Endless Power: Forget battery worries with Moto II’s long-lasting charge, months of standby time, and an optional powered mount for on-the-go charging.
Convenient Charging: USB-C connectivity offers hassle-free charging, compatible with your existing cables.
Smart Battery Management: Extend your phone’s battery life significantly when navigating with Moto II, ensuring you're always connected.
Glove-Friendly Controls: Navigate Moto II’s interface effortlessly with glove-friendly buttons, designed for accessibility from any mount position.
Advanced Navigation: Get clear, glanceable turn-by-turn directions, speed, and ETA, alongside a simple arrow display for easy decision-making on the move.
Ride Metrics Onboard: Track speed, distance, and time directly on Moto II, keeping you updated in real time.
Multilingual Support: Moto II speaks eight languages, making it the perfect companion for riders worldwide.
Explore with Compass Mode: Venture off the beaten path with Compass Mode, guiding you directly to your destination for a true adventure.
Safety First: (where available) Stay ahead with speed limit alerts, enhancing your ride safety.
Comprehensive Ride Tracking: Log every journey with the Beeline app, share routes, or discover new ones with easy GPX import/export.
Optimised Routing: Whether seeking thrills or efficiency, Moto II’s routing options ensure every ride is a journey to remember.

Technical Specs

Phone Requirements:

iPhone: iOS 15 and above
Android: Google Play running 8.0 Oreo and above
Bluetooth 4.0 capability required

Battery:

Type: Rechargeable Lithium Polymer
Capacity: 600mAh
Riding Time: 14 hours
Charging: USB-C with pogo pin contacts for charging whilst riding

Display:

Technology: Ultra bright IPS TFT with anti-reflective and hydrophobic coating
Size: 1.45” (36.8mm) diagonal, 10cm total area
Resolution: 412x412 (402ppi)

Sensors:

Accelerometer
Gyroscope
Magnetometer

Connectivity:

Bluetooth 4.0 low-energy

Materials:

Standard: ASA polymer casing with CNC aluminium bezel (Black)
Metal Edition: Machine-finished anodised alloy main casing with CNC aluminium bezel, ASA polymer back casing (Black)

Interface:

Buttons: RockerTop 2, glove-friendly buttons (accessible from the front)

Water and Particle Resistance:

IP67 rated

Size and Weight:

Dimensions: 53mm diameter, 20.5mm deep
Weight: 42g (standard), 60g (metal)

Navigation:

Advanced turn-by-turn navigation with ETA and speed info

Classic arrow display for route mode and compass mode

Turn alerts: Alert LED, device speaker (spoken alerts via app)

Additional Features:
Speed limit alerts (where available)
Ride tracking and sharing capabilities
GPX route import/export
Supports 8 languages for global riders
Fun and Fast route planning options

BEELINE MOTO II CARRY CASE

$35.00

Beeline Moto II Carry Case

This zipped, EVA hard case has a soft, padded interior with room for your Beeline Moto II and charging cable.

Comes with a handy carabiner clip for keeping your Beeline easily on hand on a bag or belt.

Features:

Webbed pouch opening half way up on one side of case to ensure accessories stay in place
Elastic strap on other side of case to hold device in place

BEELINE MOTO BAR CLAMP MOUNT

$70.00 $59.00 Save $11.00

Simple and stylish, this black anodised bar clamp is perfect for bikes with bar space. Comes with rubber shims to allow for fitting to most standard bar sizes. The adjustable head allows you to rotate the mount, letting you to get the perfect angle to suit your riding position.

Perfect for:

Standard motorcycle handlebars. Includes shims for 22, 25 and 32mm bars.

What's Included:

Bar clamp mount
2 x 22mm bar shims
2 x 25mm bar shims
2 x 32mm bar shims
Allen key

BEELINE MOTO RAM BALL MOUNT ADAPTER

$44.00 $35.00 Save $9.00

You asked, we listened. Lots of you requested the ability to use your Beeline with your RAM ball clamp. This adaptor allows you to use your Beeline Moto with the popular 1 inch diameter RAM ball system. A huge range of adjustment allows you to find the perfect viewing angle. Use this with your existing ball mount setup, or use this to build your own custom mount.

Perfect for:

Almost anywhere! You can get a huge range of 1-inch RAM ball mounts and clamps, which this adapter will work perfectly with.

What's Included:

1" ball mount adapter
Allen key

DMD HELMETS

DMD RIVALE HELMET ECE 22.06 - RAZOR

DMD RIVALE HELMET ECE 22.06 - BLADE

DMD RIVALE HELMET ECE 22.06 - CREAM

$758.00

DMD RIVALE HELMET ECE 22.06 - MATTE BLACK

$758.00

DMD RIVALE ECE 22.06 VISOR

from $100.00

Sale

DMD SEVENTYFIVE HELMET - ORO COLLECTION - MADRID - SIZE S, M

$677.00 $583.00 Save $94.00

Sale

DMD SEVENTYFIVE HELMET - ORO COLLECTION - SYDNEY

$677.00 $583.00 Save $94.00

Sale

DMD SEVENTYFIVE HELMET - MATTE BLACK

$618.00 $525.00 Save $93.00

View all

View all
46 products

RIZOMA

View all

Sold Out

RIZOMA HEADLIGHT FAIRING W/ MOUNTING KIT FOR TRIUMPH TRIDENT - ZTH063B

$247.00

Sold Out

RIZOMA HEADLIGHT GUARD UNION JACK FOR TRIUMPH THRUXTON 1200 & SPEED TWIN - ZTH060B

$259.00

RIZOMA HEADLIGHT GUARD FOR BMW R 1250 GS 2021-22 - ZBW064B

$535.00

RIZOMA FLUID RESERVOIR MOUNTING KIT - CT454B

$47.00

View all
46 products

RIZOMA HEADLIGHT FAIRING W/ MOUNTING KIT FOR TRIUMPH TRIDENT - ZTH063B

$247.00

Innovative design and quality materials. The Rizoma front fairing is made of Polycarbonate, a light and resistant material, in line with the dynamic style of this bike, it is supplied complete with assembly kit. Height adjustment, up to 30 mm, easy and fast thanks to the sliding mechanism and to the anodized aluminum insert that shows the different control possibilities.

Mounting kit included.
Height adjustment: +/- 30 mm

RIZOMA HEADLIGHT FAIRING W/ MOUNTING KIT FOR TRIUMPH TRIDENT - ZTH063B

FUEL MOTORCYCLES - LEAVE THE MAIN ROAD

Sale

FUEL BOURBON JACKET - SIZE XXL

$968.00 $816.00 Save $152.00

Sale

FUEL RALLY 2 JACKET - BLACK - SIZE 3XL

$933.00 $758.00 Save $175.00

Sale

FUEL BUNKER JACKET - SIZE XL - LAST ONE!

$933.00 $700.00 Save $233.00

Sale

FUEL SAFARI JACKET - BLACK - SIZE L

$933.00 $700.00 Save $233.00

FUEL ESCAPE VEST

$350.00

Sale

FUEL ASTRAIL JACKET - LUCKY EXPLORER - SIZE L

$898.00 $758.00 Save $140.00

Sale

FUEL ASTRAIL JACKET - NAVY - SIZE M

$898.00 $758.00 Save $140.00

Sale

FUEL FXS JACKET - SALE!

$968.00 $642.00 Save $326.00

View all

View all
45 products

AGE OF GLORY

AGE OF GLORY MISSION JACKET - BLACK

AGE OF GLORY MISSION JACKET - BROWN

AGE OF GLORY RUNAWAY RIDING SHIRT - DESERT KHAKI

AGE OF GLORY RUNAWAY RIDING SHIRT - BLACK

AGE OF GLORY CRAFTSMAN JACKET - OLIVE GREEN

AGE OF GLORY CRAFTSMAN JACKET - CARAMEL

BARUFFALDI JTT CLASSIC AVIATOR GOGGLES - BLACK LEATHER W/ PHOTOCHROMIC LENSES

View all

View all
101 products

Moto essentials

baruffaldi GOGGLES - CRAFTED IN ITALY

Sold Out

$234.00

BARUFFALDI JTT CLASSIC AVIATOR GOGGLES - CHOCOLATE BROWN LEATHER

BARUFFALDI JTT CLASSIC AVIATOR GOGGLES - BLACK LEATHER

BARUFFALDI JTT SPORT CLASSIC TRIPLE FOAM AVIATOR GOGGLES - BLACK

$140.00

BARUFFALDI ETRURIA CAFE RACER GOGGLES - SMOKY MIRROR W/ RED BAND

$164.00

BARUFFALDI ETRURIA CAFE RACER GOGGLES - BLUE MIRROR W/ BEIGE BAND

$164.00

BARUFFALDI ETRURIA CAFE RACER GOGGLES - ORANGE MIRROR W/ ORANGE BAND

$164.00

BARUFFALDI SPEED 23 GOGGLES - WHITE W/ 2 LENSES

$158.00

View all

View all
35 products

BARUFFALDI JTT SPORT CLASSIC TRIPLE FOAM AVIATOR GOGGLES - BLACK

$140.00

Baruffaldi was born in Milan circa 1932 and is one of the world's most historic goggle manufacturers.

The JTT goggles are a classic aviator style goggle made of flexible PU with a triple foam cushion (instead of a lambskin cushion as found on the JTT Classic goggles), roviex lenses, and an adjustable elastic band with PVC buckle.

Materials: triple foam
Lenses: roviex

BARUFFALDI JTT SPORT CLASSIC TRIPLE FOAM AVIATOR GOGGLES - BLACK

MERLIN - THE BEST OF BRITISH

Sold Out

MERLIN EDALE II COTEC D3O JACKET - OLIVE GREEN

MERLIN EDALE II COTEC D3O JACKET - BLACK

MERLIN EDALE COTEC JACKET-BLACK - SIZE 3XL - LAST ONE!

Sale

$816.00 $525.00 Save $291.00

Sale

MERLIN TEWKESBURY COTEC JACKET - OLIVE

$677.00 $525.00 Save $152.00

MERLIN PERTON II COTEC D3O JACKET - BLACK

$793.00

Sold Out

MERLIN SHENSTONE II COTEC AIR JACKET - OLIVE

$618.00

Sale

MERLIN SHENSTONE COTEC AIR JACKET - BLACK

$583.00 $467.00 Save $116.00

Sale

MERLIN SHENSTONE COTEC AIR JACKET - OLIVE

$583.00 $467.00 Save $116.00

View all

View all
23 products

TCX BOOTS

TCX DRIFTER WATERPROOF (WP) BOOTS - VINTAGE BROWN

$614.00

TCX CLIMATREK SURROUND GTX BOOTS - BLACK/GREY

$489.00

TCX BLEND 2 WATERPROOF (WP) BOOTS - BROWN

$469.00

TCX DARTWOOD WATERPROOF (WP) MOTO SHOES - BLACK

$411.00

Sale

TCX STREET 3 TEX WATERPROOF (WP) SHOES - BLACK/GREY - SIZE 44 - SALE!

$372.00 $234.00 Save $138.00

Sale

TCX FREYJA LADY WATERPROOF (WP) BOOTS - BLACK

$477.00 $408.00 Save $69.00

View all

View all
10 products

ETHEN ITALY - THE GOGGLES YOU'RE LOOKING FOR

ETHEN SUNSET T-SHIRT - BLACK

ETHEN LIVE FAST T-SHIRT - KHAKI

ETHEN LIVE FAST T-SHIRT - OFF WHITE

ETHEN LIVE FAST T-SHIRT - FOREST GREEN

ETHEN CAFE RACER GOGGLE MIRROR BRONZE PHOTOCHROMIC LENS - CHECKER BLACK/GOLD

ETHEN CAFE RACER GOGGLE MIRROR BRONZE PHOTOCHROMIC LENS - CHECKER BLACK/GREY

ETHEN CAFE RACER GOGGLE MIRROR BRONZE PHOTOCHROMIC LENS - CHECKER BLACK/WHITE

ETHEN CAFE RACER GOGGLE MIRROR BRONZE PHOTOCHROMIC LENS - RED / YELLOW / ORANGE

MUC-OFF MOTORCYCLE WATERLESS WASH AND PROTECTANT KIT

View all

View all
49 products

ETHEN SUNSET T-SHIRT - BLACK

$70.00

For those who dream about riding off into the sunset, this is your dream come true. Made of 100% organic ring-spun cotton, this short-sleeved T-shirt, has a crew-neck, reinforced seams on the neck and shoulders, and a soft feel. Enjoy!

Composition 90% cotton 10% viscose

Weight: 140 g / m²

The below table outlines the width at the chest as well as the length of the T-shirt in centimeters (cm) when the garment is laid flat. We suggest comparing to a T-shirt you own that fits you well and then selecting your size accordingly.

Size	S	M	L	XL	XXL	3XL
Width (cm)	47	50	53	56	59	61
Length (cm)	70	72	74	76	78	80

ETHEN LIVE FAST T-SHIRT - KHAKI

$70.00

As an apex predator, Tigers enjoy the freedom of the outdoors, but they need to be fast to catch their prey. Be like a Tiger: Live fast. Ride free.

Made of 100% organic ring-spun cotton, this short-sleeved T-shirt, has a crew-neck, reinforced seams on the neck and shoulders, and a soft feel. Enjoy!

Composition 90% cotton 10% viscose

Weight: 140 g / m²

The below table outlines the width at the chest as well as the length of the T-shirt in centimeters (cm) when the garment is laid flat. We suggest comparing to a T-shirt you own that fits you well and then selecting your size accordingly.

Size	S	M	L	XL	XXL	3XL
Width (cm)	47	50	53	56	59	61
Length (cm)	70	72	74	76	78	80

ETHEN LIVE FAST T-SHIRT - OFF WHITE

$70.00

As an apex predator, Tigers enjoy the freedom of the outdoors, but they need to be fast to catch their prey. Be like a Tiger: Live fast. Ride free.

Made of 100% organic ring-spun cotton, this short-sleeved T-shirt, has a crew-neck, reinforced seams on the neck and shoulders, and a soft feel. Enjoy!

Composition 90% cotton 10% viscose

Weight: 140 g / m²

The below table outlines the width at the chest as well as the length of the T-shirt in centimeters (cm) when the garment is laid flat. We suggest comparing to a T-shirt you own that fits you well and then selecting your size accordingly.

Size	S	M	L	XL	XXL	3XL
Width (cm)	47	50	53	56	59	61
Length (cm)	70	72	74	76	78	80

ETHEN LIVE FAST T-SHIRT - FOREST GREEN

$70.00

As an apex predator, Tigers enjoy the freedom of the outdoors, but they need to be fast to catch their prey. Be like a Tiger: Live fast. Ride free.

Made of 100% organic ring-spun cotton, this short-sleeved T-shirt, has a crew-neck, reinforced seams on the neck and shoulders, and a soft feel. Enjoy!

Composition 90% cotton 10% viscose

Weight: 140 g / m²

The below table outlines the width at the chest as well as the length of the T-shirt in centimeters (cm) when the garment is laid flat. We suggest comparing to a T-shirt you own that fits you well and then selecting your size accordingly.

Size	S	M	L	XL	XXL	3XL
Width (cm)	47	50	53	56	59	61
Length (cm)	70	72	74	76	78	80

ETHEN CAFE RACER GOGGLE MIRROR BRONZE PHOTOCHROMIC LENS - CHECKER BLACK/GREY

$187.00

The Cafe Racer is a new VINTAGE Line of Ethen Goggles now with a photochromic lens!

FEATURES

Frameless, the lens is the only bearing structure of this Cafè Racer goggle.
The foam is pasted on the lens, the elastic strap is replaceable with Velcro positioned on the final part of the elastic strap. You can purchase additional/replacement straps here.
Retro looking goggle: the milling line all around the lens makes the goggle a little masterpiece of design Made in Italy.
Ultra shock absorber lens, photochromic mirror bronze effect lens (lightens in dark/shade conditions and darkens in sunlight).
It is an innovative lens combining the sharpness of the best mineral lens with impact resistance of an organic lens.
The elastic strap is finished with eco-leather and branded with the Ethen logo.
The goggle colors recall the 50/60s design.
Perfect for cafe racer, scrambler, custom and vintage bike owners.

ETHEN CAFE RACER GOGGLE MIRROR BRONZE PHOTOCHROMIC LENS - CHECKER BLACK/GREY

ETHEN CAFE RACER GOGGLE MIRROR BRONZE PHOTOCHROMIC LENS - CHECKER BLACK/WHITE

$187.00

The Cafe Racer is a new VINTAGE Line of Ethen Goggles now with a photochromic lens!

FEATURES

Frameless, the lens is the only bearing structure of this Cafè Racer goggle.
The foam is pasted on the lens, the elastic strap is replaceable with Velcro positioned on the final part of the elastic strap. You can purchase additional/replacement straps here.
Retro looking goggle: the milling line all around the lens makes the goggle a little masterpiece of design Made in Italy.
Ultra shock absorber lens, photochromic mirror bronze effect lens (lightens in dark/shade conditions and darkens in sunlight).
It is an innovative lens combining the sharpness of the best mineral lens with impact resistance of an organic lens.
The elastic strap is finished with eco-leather and branded with the Ethen logo.
The goggle colors recall the 50/60s design.
Perfect for cafe racer, scrambler, custom and vintage bike owners.

Customer Reviews

Based on 1 review Write a review

ETHEN CAFE RACER GOGGLE MIRROR BRONZE PHOTOCHROMIC LENS - CHECKER BLACK/WHITE

MUC-OFF MAINTENANCE PRODUCTS

$82.00

MUC-OFF 5X PREMIUM BRUSH SET

$69.00

MUC-OFF HELMET CARE KIT

$82.00

MUC-OFF MOTORCYCLE ALL-WEATHER CHAIN LUBE - 400ML

$28.00

MUC-OFF MOTORCYCLE CHAIN CLEANER - 400ML

$28.00

MUC-OFF CHAIN BRUSH

$28.00

MUC-OFF MOTORCYCLE CHAIN CARE KIT

$82.00

MUC-OFF MOTORCYCLE CARE KIT

$55.00

MUC-OFF WUNDER SHINE POLISH

$47.00

MUC-OFF HIGH PERFORMANCE WATERLESS WASH - 750ML

$35.00

MUC-OFF POWERSPORTS DRIVETRAIN CLEANER - 500ML

$39.00

MUC-OFF MOTORCYCLE PROTECTANT WORKSHOP SIZE (750ML)

$35.00

View all

View all
23 products

MUC-OFF MOTORCYCLE ALL-WEATHER CHAIN LUBE - 400ML

$28.00

May we introduce our high performance, state of the art motorcycle chain lubricant – the ceramic-based Muc-Off All-Weather Chain Lube.

After years of research and development, we identified that there were some big differences with what riders want and need from a chain lubricant. After all, Racing motorcycles, touring motorcycles and off-road machines are all going to have different chain lube requirements. Muc-Off All-Weather Chain Lube is the first of its kind and is set to revolutionise chain efficiency and performance for all motorcycles covering longer distances and is ideal for tourers or commuters as you can go far longer between reapplication intervals. Our unique water repellent, ceramic, non-fling formula penetrates deep into the chain link. This creates a durable protective coating which will guard your chain against corrosion and metal to metal wear, in all weather conditions. An added benefit to our unique formula is that it includes a UV Dye, which means you can accurately see the lubricants specific coverage when using a UV Torch. This also allows you to wipe away any overspray that may have otherwise gone undetected.

All-Weather Chain Lube means longer intervals between applications, with greater protection for your chain!

FEATURES

Suitable for standard, O, X and Z-Ring chains.
For long distance all weather on/off-road riding.
High performance synthetic formulation for maximum protection.
Ceramic additives increase component life and maximise horsepower.
Contains UV over spray dye

MUC-OFF MOTORCYCLE ALL-WEATHER CHAIN LUBE - 400ML

MUC-OFF MOTORCYCLE CARE KIT

$55.00

The Muc-Off Motorcycle Care Kit is the essential one-stop kit for moto care and maintenance, containing all the basic elements you need to keep your motorbike looking box-fresh for longer!

FEATURES

Motorcycle Cleaner

Safe on all parts and surfaces including carbon fibre
Will not harm seals, cables, brake pads or rotors
Safe on anodized metal
Alkaline based and free from CFCs, solvents or acids
Nano Tech Formula cleans on a molecular level
Biodegradable
How to:
- Step 1 - Rinse motorbike thoroughly before applying Nano Tech Motorcycle Cleaner.
- Step 2 - Spray Nano Tech Bike Cleaner onto the entire motorbike including components and leave for 3-5 minutes. Do not let it dry or apply in direct sunlight.
- Step 3 - Agitate any stubborn grime with a brush or sponge.
- Step 4 - Rinse entire bike thoroughly with fresh, clean water.

Motorcycle Protectant

High-performance formula leaves dry, non-sticky protective film
For use after washing to drive out excess water
Prevent dirt adhesion
Makes an ideal winter protectant
Quick and easy to use

Microcell Sponge

Bike friendly size
Expands after opening
Ergonomic design

MUC-OFF WUNDER SHINE POLISH

$47.00

Let’s not beat around the bush, you want a high quality polish and protectant that delivers a deep and luxurious shine for your bike, motorcycle & cars bodywork, Muc-Off Wunder Shine is the product for that job. Not only does our Wunder Shine give you amazing reflective results – but it also covers the treated areas with a microscopic protective layer against atmospheric pollutants, thanks to it’s Fluoro Polymer Technology!

Our luxurious polish also includes Carnauba Wax as well as other highly advanced ingredients so that your paintwork is treated with love and respect. So if you want your paint finish to gleam like new, make the water bead away furiously and make the car easier to clean next time, Muc-Off Wunder Shine is the product for you.

FEATURES

Removes imperfections and fills minor scratches
Flouro Polymer technology creates a microscopic layer of protection
Repels water and atmospheric pollutants
Reduces washing and maintenance time
Silicon oils allow easy application and incredible depth of shine
Will not leave a powdery white residue
Safe on paintwork, clear coat, carbon fibre, chrome, met

HOW TO

Thoroughly wash and dry surfaces before use. Shake can vigorously and apply a small amount of Wunder Shine using a microfibre cloth.
Wait approximately 30-45 seconds or until the polish begins to haze before gently buffing it off. Do not let polish dry or apply in direct sunlight.
Multiple coats may be applied for increased protection and shine. Wait 24 hours before reapplying.

MUC-OFF POWERSPORTS DRIVETRAIN CLEANER - 500ML

$39.00

Got a load of grime, mud or oil build up on your machine’s chain and sprockets? Then reach for our Powersports Drivetrain Cleaner! This product will make light work of the toughest of residue from all drivetrain areas, thanks to its fast and effective biodegradable formula. So there’s no need to worry next time you’re out riding on a muddy or wet day, as we’ve got you covered.

FEATURES

Biodegradable*
Can be used on all motorcycles, quads, ATVs and UTVs
Suitable for standard O, X, Z ring chains
Water-soluble formula
Fast and effective grease cutting formula
Removes all chain oil and wax residue from drivetrain and swingarm
Safely eliminates drive chain contaminants
Ideal for use with chain cleaning brushes and chain cleaning devices
Trigger spray included for easy application
Deep cleans all drive chain areas in seconds
Safe on metal components, hard plastic, rubber and seals

*Only contents are readily biodegradable.

PLEASE NOTE: Not recommended for non-factory finishes. For best results always test an inconspicuous area before use. Use with caution on painted surfaces. Do not leave on carbon fibre for longer than instructed. Always ensure parts are fully cooled before using. Store in a cool dry place.

DANGER: Keep out of reach of children. May be fatal if swallowed and enters airways. Causes skin irritation. Causes serious eye irritation. Wear protective gloves/eye protection. IF SWALLOWED: Immediately call a POISON CENTER/doctor. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Do NOT induce vomiting. IF ON SKIN: Wash with plenty of water/soap. If eye irritation persists: Get medical advice/attention.

MUC-OFF POWERSPORTS DRIVETRAIN CLEANER - 500ML

THE EQUILIBRIALIST - VISORS FOR BILTWELL GRINGO, GRINGO S, AND GRINGO SV HELMETS

View all

THE EQUILIBRIALIST KNOX MASKA FOR BILTWELL GRINGO, GRINGO S/SV - TAN-TAN TINTED

THE EQUILIBRIALIST KNOX MASKA FOR BILTWELL GRINGO, GRINGO S/SV - BLACK TINTED

THE EQUILIBRIALIST KNOX MASKA FOR BILTWELL GRINGO, GRINGO S/SV - TAN-TAN CLEAR

Sold Out

THE EQUILIBRIALIST KNOX MASKA FOR BILTWELL GRINGO, GRINGO S/SV - TAN-BLACK TINTED

THE EQUILIBRIALIST KNOX MASKA FOR BILTWELL GRINGO, GRINGO S/SV - BLACK CLEAR

MOTONE "THE SCOUT" LEATHER & WAXED CANVAS TOOL ROLL FULLY LOADED INCL. TOOLS

View all
5 products

THE EQUILIBRIALIST KNOX MASKA FOR BILTWELL GRINGO, GRINGO S/SV - TAN-TAN TINTED

$245.00

The Knox Maska fits Biltwell Gringo, Gringo S, and Gringo SV helmets.

THE DEPICTED HELMET IS NOT INCLUDED.

The visor is constructed from high-strength polycarbonate, which is coated with anti-fog and anti-scratch coatings. Its precise fitment on the helmet protects the rider from road debris and enhances the overall sound insulation. The Maska's design allows the rider to easily change the visor based on the riding conditions within seconds.

The elastic strap is crafted from synthetic leather, which offers a premium feel but most importantly increased durability. The rider can match the visor with a variety of different straps based on his/her personal preferences. The strap's universal design makes it compatible with all of the Maska visors.

Technical Specs:

Visor:

High-strength polycarbonate
Inner anti-fog coating
Outer anti-scratch coating
Edge: Made out of high-grade synthetic leather
Stainless Steel Hardware

Strap:

One-Size
Made out of high-grade synthetic leather
Elastic Webbing - Coated with silicone beads for enhanced grip

Customer Reviews

Based on 1 review Write a review

THE EQUILIBRIALIST KNOX MASKA FOR BILTWELL GRINGO, GRINGO S/SV - TAN-TAN TINTED

THE EQUILIBRIALIST KNOX MASKA FOR BILTWELL GRINGO, GRINGO S/SV - BLACK TINTED

$245.00

The Knox Maska fits Biltwell Gringo, Gringo S, and Gringo SV helmets.

THE DEPICTED HELMET IS NOT INCLUDED.

The visor is constructed from high-strength polycarbonate, which is coated with anti-fog and anti-scratch coatings. Its precise fitment on the helmet protects the rider from road debris and enhances the overall sound insulation. The Maska's design allows the rider to easily change the visor based on the riding conditions within seconds.

The elastic strap is crafted from synthetic leather, which offers a premium feel but most importantly increased durability. The rider can match the visor with a variety of different straps based on his/her personal preferences. The strap's universal design makes it compatible with all of the Maska visors.

Technical Specs:

Visor:

High-strength polycarbonate
Inner anti-fog coating
Outer anti-scratch coating
Edge: Made out of high-grade synthetic leather
Stainless Steel Hardware

Strap:

One-Size
Made out of high-grade synthetic leather
Elastic Webbing - Coated with silicone beads for enhanced grip

THE EQUILIBRIALIST KNOX MASKA FOR BILTWELL GRINGO, GRINGO S/SV - BLACK TINTED

THE EQUILIBRIALIST KNOX MASKA FOR BILTWELL GRINGO, GRINGO S/SV - TAN-BLACK TINTED

$245.00

Can't decide between tan and black? No problem! Get the best of both worlds with the black & tan tinted Knox Maska for Biltwell Gringo, Gringo S, and Gringo SV helmets.

THE DEPICTED HELMET IS NOT INCLUDED.

The visor is constructed from high-strength polycarbonate, which is coated with anti-fog and anti-scratch coatings. Its precise fitment on the helmet protects the rider from road debris and enhances the overall sound insulation. The Maska's design allows the rider to easily change the visor based on the riding conditions within seconds.

The elastic strap is crafted from synthetic leather, which offers a premium feel but most importantly increased durability. The rider can match the visor with a variety of different straps based on his/her personal preferences. The strap's universal design makes it compatible with all of the Maska visors.

Technical Specs:

Visor:

High-strength polycarbonate
Inner anti-fog coating
Outer anti-scratch coating
Edge: Made out of high-grade synthetic leather
Stainless Steel Hardware

Strap:

One-Size
Made out of high-grade synthetic leather
Elastic Webbing - Coated with silicone beads for enhanced grip

Customer Reviews

Based on 1 review Write a review

THE EQUILIBRIALIST KNOX MASKA FOR BILTWELL GRINGO, GRINGO S/SV - TAN-BLACK TINTED

MOTONE - PARTS FOR YOUR RIDE

$269.00

MOTONE CORTADO KIT W/ ELDORADO TAIL LIGHT FOR LC STREET/SPEED TWIN 900 / SCRAMBLER 900 / T100 / T120 / STREET CUP

$1,749.00

MOTONE CORTADO KIT W/ GORT TAIL LIGHT FOR LC STREET/SPEED TWIN 900 / SCRAMBLER 900 / T100 / T120 / STREET CUP

$1,749.00

MOTONE FASTBACK CAFE RACER SEAT - BLACK

MOTONE STREET TRACKER SEAT - BLACK

MOTONE KING COBRA RIBBED SEAT FOR TRIUMPH BOBBER - BLACK

MOTONE "THE BLACKADDER" LOW PROFILE SKINNY DIAMOND STITCH SEAT - TOBACCO BROWN

MOTONE "THE BLACKADDER" LOW PROFILE SKINNY DIAMOND STITCH SEAT - BLACK

MOTONE SPEED VIPER SEAT FOR TRIUMPH SPEED TWIN 1200 - BLACK

Sold Out

MOTONE SPEED VIPER MKII SEAT FOR TRIUMPH SPEED TWIN 1200 - BLACK