MOTORCYCLE PARTS

Motone Nautilus Exhaust System - Full Exhaust System for your Triumph Bobber or Speedmaster

Tig-Welded out of 300 Series Stainless Steel Pie-cuts the Nautilus is a full system for your Triumph Bobber or Speedmaster - this system replaces the stock cat and has a H-Pipe connector between both headers (no x-pipe or additional parts required to fit)

We also include some inline dB killers as standard - these can easily be removed for extra volume - leaving them in allows you for a more subtle getaway whilst the engine is at low revs for those who have to bundle out of the bedroom window ay 5am hoping to make for a stealthy getaway 

Fitment:

• 2017+ Triumph Bobber
• 2018+ Triumph Speedmaster

MC PART ID: MTE192

MC PART ID: ENG303

This x-pipe is designed to be fit in place of the stock catalytic converter at the base of your bike, unleashing the power your engine was naturally designed to produce.

Suitable for both the 900 and 1200cc powerplant you can expect large gains for minimal effort 

Suitable for all the Triumph Twin range 2016 and up except the Street Scrambler which of course has the high pipes.

Fits:  T100 LC, T120, Street Twin, Street Cup, Thruxton R, Thruxton S, Bobber, Speedmaster, Speed Twin

PLEASE NOTE - the following EURO 5 BIKES  (Solid from year 2021 on) have link pipes welded to the stock cat which means to remove cat you have to replace not only the cat but the link pipes (and mufflers) as well.   

2021 and UP : STREET TWIN/T100/T120/THRUXTON RS/SPEED TWIN - NEED NEW VERSION

HOWEVER If you have a BOBBER or SPEEDMASTER you can still run the stock mufflers with the X-Pipe no problem as the link pipes are not welded to the cat on any year. 

TO BE CLEAR : MOTONE XPIPE DESIGN FITS ALL YEARS BOBBER AND SPEEDMASTER

MC PART ID: MTE120

MC PART ID: MMU505

MC PART ID: MSM034

MC PART ID: MSM037

MC PART ID: MSM028

MC PART ID: MSM036

MC PART ID: MSM025

MC PART ID: MSM032

MC PART ID: MSM026

MC PART ID: MSM029

Windshield with GPS support for ninet Scrambler-Pure
Complete with supports and screws, it is perfectly in style with the lines of the front. Made of 4mm thick PMMA (Acrylic). It mounts very easily and offers excellent aerodynamic protection. The front louver eliminates turbulence, and the support tube doubles as a GPS mount.
Colours: choose the colour in the list: (transparent, dark smoke, yellow).

NB: It is compatible with the original instrument

Simple and stylish, this black anodised bar clamp is perfect for bikes with bar space. Comes with rubber shims to allow for fitting to most standard bar sizes. The adjustable head allows you to rotate the mount, letting you to get the perfect angle to suit your riding position.

Perfect for:

• Standard motorcycle handlebars. Includes shims for 22, 25 and 32mm bars.

What's Included:

• Bar clamp mount
  
• 2 x 22mm bar shims
• 2 x 25mm bar shims
• 2 x 32mm bar shims
• Allen key

You asked, we listened. Lots of you requested the ability to use your Beeline with your RAM ball clamp. This adaptor allows you to use your Beeline Moto with the popular 1 inch diameter RAM ball system. A huge range of adjustment allows you to find the perfect viewing angle. Use this with your existing ball mount setup, or use this to build your own custom mount.

Perfect for:

Almost anywhere! You can get a huge range of 1-inch RAM ball mounts and clamps, which this adapter will work perfectly with.

What's Included:

• 1" ball mount adapter
• Allen key

Beeline Moto Case

This zippered EVA hard case has a soft, padded interior with room for your Beeline Moto and charging cable. Thanks to the handy carabiner, you can easily attach it to your belt, bag, or backpack and always have your Beeline Moto at hand.

Features:

• The padded, soft inner lining provides protection from scratches and shocks
• Convenient carabiner for individual attachment
• Full-length zipper for easy removal

Contents:

• 1x Beeline Moto case

MC PART ID: MTE139

MC PART ID: MTE182

MC PART ID: KNS002

Custom lathed out of aviation grade 6061t Aluminum.

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for extra grip - the lower threaded part of the cap has a spring-bound valve system centrally located in the middle of the bung.

This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.

It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.

Some models it will fit include Bonneville, T100, America, Speedmaster, Thruxton. It will also fit on all post 1983 Harleys with regular right hand thread

FITS ALL YEARS BONNEVILLE THRUXTON, AMERICA, T100, SPEEDMASTER, SE, SCRAMBLER, BOBBER, STREET TWIN, STREET CUP, STREET SCRAMBLER, T120: 2001-2018 Present - Fits both CARB and EFI bikes.

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018 PRESENT SPORTSTER, 48, IRON ETC

MC PART ID: NXS006

Supplied here with cap in Black Finish with Polished Fins

Kit Suitable for

Triumph Twins 2001-2015 (T100, Thruxton, SE, Scrambler)
Triumph Twins 2016-Present (Bobber, T100, T120, Street Cup, Street Twin etc)
Harley Davidson 1983 and Up (Sportster, Dyna, etc)
Moto Guzzi V7
Royal Enfield Classic (with screw top type filler bung)

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THESE BIKES (IN BLACK OR POLISH)

Monza cap built by Motone using modern HIGH PRESSURE DIE CAST technology

Triumph/HD Fuel tank adapter kit CNC formed out of billet aviation-grade aluminium 

MC PART ID: NMX019+NMX003

Custom lathed out of aviation grade 6061t Aluminum.

This sale is for the complete new cap fully assembled and ready to fit on your bike.  This version has spun Satin Finish.

Sides of the top cap knurled for extra grip - the lower threaded part of the cap has a spring-bound valve system centrally located in the middle of the bung.

This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.

It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.

FITS ALL YEARS TRIUMPH BONNEVILLE FAMILY BIKES FROM 2001 to NOW INCLUDING T100, T120, STREET TWIN, STREET CUP, STREET SCRAMBLER, BOBBER, SPEEDMASTER, THRUXTON 900, SCRAMBLER, SE, AMERICA

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THES BIKES (IN BLACK OR POLISH)

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018 PRESENT SPORTSTER, 48, IRON ETC

MC PART ID: NXS010

Custom lathed out of aviation grade 6061t Aluminum.

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for extra grip - the lower threaded part of the cap has a spring-bound valve system centrally located in the middle of the bung.

This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.

It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.

Some models it will fit include Bonneville, T100, America, Speedmaster, Thruxton. It will also fit on all post 1983 Harleys with regular right hand thread

FITS ALL YEARS TRIUMPH BONNEVILLE FAMILY BIKES FROM 2001 to NOW

INCLUDING T100, T120, STREET TWIN, STREET CUP, STREET SCRAMBLER, BOBBER, SPEEDMASTER, THRUXTON 900, SCRAMBLER, SE, AMERICA

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THES BIKES (IN BLACK OR POLISH)

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018 PRESENT SPORTSTER, 48, IRON ETC

MC PART ID: NXS003

Custom lathed out of Brass and aviation grade 6061t Aluminum.

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap in brass have been knurled for extra grip - the lower threaded part of the cap in aluminum has a spring-bound valve system centrally located in the middle of the bung.

This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.

It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.

FITS ALL YEARS TRIUMPH BONNEVILLE FAMILY BIKES FROM 2001 to NOW

INCLUDING T100, T120, STREET TWIN, STREET CUP, STREET SCRAMBLER, BOBBER, SPEEDMASTER, THRUXTON 900, SCRAMBLER, SE, AMERICA

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THES BIKES (IN BLACK OR POLISH)

FITS ALL HARLEY DAVIDSON WITH SCREW IN CAPS 1983-2018 SPORTSTER, 48, IRON, ETC

MC PART ID: NXS001

Custom lathed out of aviation grade 6061t Aluminum.

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for extra grip - the lower threaded part of the cap has a spring-bound valve system centrally located in the middle of the bung.

This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.

It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.

Some models it will fit include Bonneville, T100, America, Speedmaster, Thruxton. It will also fit on all post 1983 Harleys with regular right hand thread

FITS ALL YEARS BONNEVILLE THRUXTON, AMERICA, T100, SPEEDMASTER, SE, SCRAMBLER, BOBBER, STREET TWIN, STREET CUP, STREET SCRAMBLER, T120 : 2001-2018 Present - Fits both CARB and EFI bikes.

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018 PRESENT SPORTSTER, 48, IRON ETC

MC PART ID: NXS002

Engine Oil Filler Cap with Built in Temperature Gauge 

MC PART ID: MMU054

MC PART ID: MMU055 

Rizoma Engine Oil Filler Cap for Triumph Bobber, Street Twin, T120, Thruxton 1200/1200R.

Features:

• Machined from billet aluminum
• Black color available  - for other color options please contact us
• Rizoma Part Number TP043B

MC PART ID: MMU578

MC PART ID: MTE140

MC PART ID: MMU579

MC PART ID: MTE206

Custom 5-Axis CNC milled out of a single block of aviation grade billet 6061t aluminium.

Includes all fixings necessary to mount to bike - Bolt on part - Easy to fit.

These will fit any bike with 41mm Diameter Front Forks

We have tested them on Triumph Bonneville T100 from 2001 to now. Street Twin. Street Cup. T120. Bobber etc.

MC PART ID: MTE046

Laser cut out of steel and powder coated Black these brackets are designed to work with the bolt spacing on any of our Round tail lights (Eldorado, Bel Air, Miller, Lecter, Cuda, etc) 

You can use this bracket anywhere on the bike: it also is designed to slide in between our fender light bracket and our tail lights in an assembly (e.g. Eldorado fender light kit) so you can mount a plate with them, with the down facing lights on the tail light illuminating the plate. 

Often used in Combination with our Rear Mudguards such as the Motone High-Tail Custom Mudguard.

NOTE: Motone Fender Light Kit (e.g. Eldorado) and wiring loom (e.g. DDM012) must be purchased separately. Please click on the links if you'd like to add these to your cart as well.

MC PART ID: PTS012