GIFTS OVER $200

Imagine a flat piece of land with an oval-shaped track on it. Young people hungry for speed, pushing their limits to see who can go around the fastest without brakes. Flat track racing has been around for nearly a century and it is possibly the oldest form of motorcycle racing still in existence. The Fuel "Sidewaze" leather jacket pays homage to those times and spirit.

Thanks to the high-quality buffalo suede leather, this jacket not only protects but also gains a unique patina as it ages over the course of time. The jackets are waxed individually, giving each one a unique character.

The Fuel Sidewaze Jacket sizes slightly smaller than similar leather jackets. Please check and follow the size guide below. If you're between sizes, pick one size larger.

PROTECTION / TECHNICAL SPECIFICATIONS

• 100% Full grain Buffalo suede leather outer shell
• 100% Full grain Naturally tanned black leather sleeves
• 300 GSM 100% Cotton twill inner shell.
• CE approved elbow shoulder and back protectors Level 2
• YKK japanese made brass zippers
• Nickel-free brass buttons
• Waxed processing for pronounced badass look
• CE approved prEN 17092-4:2020 Class AAA + UKCA 

It's not always easy to find a great vintage looking pant that is also comfortable to wear while riding your motorcycle. Inspired by the vintage racing leather pants of the 70’s, Age of Glory's DESERT PANT is the pant for your everyday adventures, both urban and off-road.

Enjoy freedom of movement and excellent protection with Kevlar fabric in critical areas and removable protectors on the knees.

The Details:

• Stretch Twill cotton 12oz
• Dupont© Kevlar fabric inside the pant on the buttocks, hips and knees
• Quilted pads on the hips
• Nubuck pads inside the legs on the knee area
• Removable knee protectors included (CE – EN1621-1)
• Zippers at the bottom of the legs, on the back
• Light quilting on lower parts of the legs
• Comfort gussets on the top of the knees and back (below the waist) areas

The long-awaited Holy Freedom riding boots have arrived! An exceptional motorcycle boot with a vintage design, the Terminator boots are CE-approved, made of leather and TPU, with a rubber outsole. Put them on and go for a little ripsky with these great-looking protective motorcycle boots. Available here in the high version for extra shin protection for any spontaneous off-road riding that might pique your interest.

Specifications

• Full grain leather upper will age beautifully
• 100% polyester lining
• EVA midsole - EVA is a foam in the midsoles that provides great shock absorption when you walk or run.
• Rubber outsole
• Waterproof
• Shaft height: 33cm
• PVC 5NO inner ankle protection
• Side technical tension strap; two position gray steel buckle with black plastic straps
• Large hook and loop strap for calf closure adjustment
• Internally reinforced toe section
• Rubber outsole with black bottom inserts provides perfect grip and high comfort
• Tab in the upper part helps with putting on the boot
• It comes with the original cotton taslan laces.
• The eyelets are made of metal with antique finish
• HolyFreedom® embossing

Introducing the Sergeant 2 Pants, highly functional riding trousers that not only look like they can take a beating, but that can perform too. The 2nd generation of Fuel's highly popular Sergeant Pants keeps the same look but with a much-improved fit. These fit much more true-to-size than the original Sergeant's. In addition, the knee armour can be adjusted up or down if needed. Quilting and suede panels give the Sergeant 2 a style of their own. This new version also comes with the FUEL 3CORE fabric, produced with leading-edge tri-core technology.

What is Fuel 3CORE Fabric?

Technology is changing and growing fast. This is why after two years of development, we developed the FUEL 3CORE fabric, to guarantee customer satisfaction and improve our products.

Fuel 3CORE fabric is produced with leading-edge tri-core technology: a new revolutionary technology resulting in a lighter fabric with significantly improved performance in both strength and comfort. The Fuel 3CORE single layer is an abrasion-resistant fabric with bi-stretch exclusively developed for our products, so you can leave the main road safer, lighter, and even more comfortable.

The Knox Maska fits Biltwell Gringo and Gringo S helmets.

THE DEPICTED HELMET IS NOT INCLUDED.

The visor is constructed from high-strength polycarbonate, which is coated with anti-fog and anti-scratch coatings. Its precise fitment on the helmet protects the rider from road debris and enhances the overall sound insulation. The Maska's design allows the rider to easily change the visor based on the riding conditions within seconds. 

The elastic strap is crafted from synthetic leather, which offers a premium feel but most importantly increased durability. The rider can match the visor with a variety of different straps based on his/her personal preferences. The strap's universal design makes it compatible with all of the Maska visors.

Technical Specs:

Goldtop's Bobber Jacket is a retro, classic 1970s style leather motorcycle jacket revived for modern-day riders. Featuring an asymmetric main zip, this double-breasted jacket provides protection through Knox's state of the art Micro-lock armour. It comes equipped with CE Level 1 armour in the shoulders and elbows and a pocket for an optional back protector. The jacket is manufactured from hand-selected, 1.4mm thick aniline cowhides which have each been hand-waxed, making each finished article unique, with a patina that ages beautifully with both time and wear. The whole jacket is finished by hand with a soft red suede trim inside the collar and cuffs, prestige quality zips throughout, and all additional metalware being made from high-quality polished Stainless Steel.

This jacket boasts a CE "AAA" level of protection, the highest most protective level it could possibly achieve. 

Available in sizes 38" to 52". Is your size not currently available on our site? No problem; we do special orders! Contact us at info@strathmoto.com and let us know what you need. Note: sizes 50 and 52 are special order and as such carry an additional $100 charge already included in the price shown as compared to standard sizes.

PRODUCT INFO

• 1.4mm Aniline cowhide leather
• CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
• Optional Knox Micro-lock Compact back protector can be purchased here
• Double-stitched diamond quilting on shoulders and lower back panel
• Traditional off-centre slanted zip
• 1 Exterior vertical breast pocket
• 2 Exterior side pockets with ball zips
• 2 Interior breast pockets
• Single adjustable Stainless Steel waist buckles 
• Industrial grade hand-polished centre zip with AERO puller
• Trademark Goldtop gold quilted lining
• Red suede leather trim in collar & cuffs

MODERN CLASSIC

The Bullitt is an iconic product, a helmet rooted in a storied past mixed with a style and design that could best be described as "retro-future." Inspired by the legendary Bell Star helmets of the '60s and '70s but speaking a modern design language, the Bullitt became an instant classic the moment it hit the streets. We use only the highest-quality ingredients, right down to the last stitch of its genuine leather interior, to create this functional work of art. Available in fiberglass composite and featuring many shield options to further customize this one-of-a-kind helmet. No matter what, how, or where you ride, the Bullitt is in a class by itself. Includes Clear faceshield.

MODERN CLASSIC

The Bullitt is an iconic product, a helmet rooted in a storied past mixed with a style and design that could best be described as "retro-future." Inspired by the legendary Bell Star helmets of the '60s and '70s but speaking a modern design language, the Bullitt became an instant classic the moment it hit the streets. We use only the highest-quality ingredients, right down to the last stitch of its genuine leather interior, to create this functional work of art. Available in fiberglass composite and featuring many shield options to further customize this one-of-a-kind helmet. No matter what, how, or where you ride, the Bullitt is in a class by itself. Includes Clear faceshield.

MODERN CLASSIC

The Bullitt is an iconic product, a helmet rooted in a storied past mixed with a style and design that could best be described as "retro-future." Inspired by the legendary Bell Star helmets of the '60s and '70s but speaking a modern design language, the Bullitt became an instant classic the moment it hit the streets. We use only the highest-quality ingredients, right down to the last stitch of its genuine leather interior, to create this functional work of art. Available in fiberglass composite and featuring many shield options to further customize this one-of-a-kind helmet. No matter what, how, or where you ride, the Bullitt is in a class by itself. Includes Clear faceshield.

It's not always easy to find a great vintage looking pant that is also comfortable to wear while riding your motorcycle. Inspired by the vintage racing leather pants of the 70’s, Age of Glory's DESERT PANT is the pant for your everyday adventures, both urban and off-road.

Enjoy freedom of movement and excellent protection with Kevlar fabric in critical areas and removable protectors on the knees.

The Details:

• Stretch Twill cotton 12oz
• Dupont© Kevlar fabric inside the pant on the buttocks, hips and knees
• Quilted pads on the hips
• Nubuck pads inside the legs on the knee area
• Removable knee protectors included (CE – EN1621-1)
• Zippers at the bottom of the legs, on the back
• Light quilting on lower parts of the legs
• Comfort gussets on the top of the knees and back (below the waist) areas

MOTO 3. NOT RETRO. ORIGINAL.

The iconic legend has returned! When the original Moto-3 was created back in the late 70s it was a product ahead of its time. Quickly becoming the industry standard in performance and style, today's Moto-3 is everything it was style-wise, with the added benefits of modern saftey and production advancements. From the fiberglass composite shell to the EPS-lined chin bar, we left no detail unpolished. The solid colors use the original style terrycloth liner, which is removable and washable.

ALL-TERRAIN EXPLORER

From the roughest singletrack to urban blacktop, the MX-9 Adventure MIPS gets you there safely in style. Bell have taken their MX-9 and added even more capability with an integrated anti-fog, anti-scratch clear faceshield. The shield flips up and leaves enough room for goggles in extreme conditions, or it can be removed completely. Conversely, the adjustable visor can be removed for a stealth street look. MIPS protection, Velocity Flow ventilation, and a removable, washable, anti-microbial liner round out a highly adaptable package.

ALL-TERRAIN EXPLORER

From the roughest singletrack to urban blacktop, the MX-9 Adventure MIPS gets you there safely in style. Bell have taken their MX-9 and added even more capability with an integrated anti-fog, anti-scratch clear faceshield. The shield flips up and leaves enough room for goggles in extreme conditions, or it can be removed completely. Conversely, the adjustable visor can be removed for a stealth street look. MIPS protection, Velocity Flow ventilation, and a removable, washable, anti-microbial liner round out a highly adaptable package.

The new ECE-certified Gringo S boasts fit, finish and safety technology identical to its no-frills full-face sibling, but features a flip-up face shield for added safety and riding comfort.

Technical Details

• Injection-molded ABS plastic outer shell is rugged yet lightweight
• Three-piece Expanded Polystyrene (EPS) safety shell dissipates impact loads and enhances helmet structure for safety without compromising comfort
• Molded urethane chin bar pad dissipates energy from frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• CE-certified, injection-molded polycarbonate shield has anti-fog and anti-scratch treatments for safety and durability
• Built in recesses for various aftermarket audio & comms systems

Helmet Fitment

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. ECE-certified helmets fit more snugly than similar US DOT-compliant models to meet Europe's stricter standards for impact attenuation. NOTE: Biltwell offers accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Our ECE-certified Gringo S boasts fit, finish and safety technology identical to its full-face sibling, but features a CE-certified flip-up face shield for added safety and riding comfort.

Technical Details

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy from frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
• Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow 
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components

Progressively styled and rigorously tested, Biltwell's finest ECE-certified helmet is a top choice for high-performance riders. Comes standard with an injection molded anti-fog clear face shield.

Technical Details

• Injection-molded ABS plastic outer shell is rugged yet lightweight
• Three-piece Expanded Polystyrene (EPS) safety shell dissipates impact loads and fortifies helmet structure without compromising comfort
• Molded urethane chin bar pad features front and side vents for cooling airflow
• CE-certified polycarbonate shield is anti-fog and anti-scratch for safety and durability
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Built in recesses for various aftermarket audio & comms systems

Progressively styled and rigorously tested, Biltwell's finest ECE-certified helmet is a top choice for high-performance riders. Comes standard with an injection molded anti-fog clear face shield.

Technical Details

• Injection-molded ABS plastic outer shell is rugged yet lightweight
• Three-piece Expanded Polystyrene (EPS) safety shell dissipates impact loads and fortifies helmet structure without compromising comfort
• Molded urethane chin bar pad features front and side vents for cooling airflow
• CE-certified polycarbonate shield is anti-fog and anti-scratch for safety and durability
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Built in recesses for various aftermarket audio & comms systems

The DMD Solo Rider brown leather jacket is a classic motorbike jacket suitable for every kind of bike.

This jacket is full of details including the quilted patches applied both on the shoulders and sleeves recalling the style of jackets used in motorbike races of the 1920s.

Not only does it look fantastic, the Solo Rider is a properly protective motorcycle jacket with homologation, certified CE AA (EN 17092-3:2020), and includes certified protectors in the shoulders and elbows with an option to purchase a back protector separately. 

Protection

• Protective and homologated motorcycle jacket
• CE certification: AA (EN 17092-3: 2020)
• Predisposition for certified protectors on shoulders and elbows (protectors included).
• Lightweight, ultra-flexible and ventilated protectors
• Predisposition for back protection (special pocket) (Back protector is NOT included but can be purchased separately here)

 Features

• Made of real leather. Color: Brown
• Stand up collar with press studs closure
• Front zip and press studs closure
• 4 press studs closure front pockets
• Quilted patches applied both on shoulders and sleeves
• Zip closure vest pocket
• Zip closure and press studs closure at cuffs
• Vintage design inner lining
• Specialist dry clean only
• MADE IN ITALY

Since DMD jackets are made of genuine leather, any imperfections are not to be considered as defects, but as a peculiarity of the garment.

Model in the last image is 1.83 m wearing size L

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its plush inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet fashionable and stylish with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then permit to air dry whenever possible to prevent heat damage.

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its plush inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet fashionable and stylish with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing;  then permit to air dry whenever possible to prevent heat damage.

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its plush inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet fashionable and stylish with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing;  then permit to air dry whenever possible to prevent heat damage.

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its fabulous inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet fashionable and stylish with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then permit to air dry whenever possible to prevent heat damage.

Fitment note: our customers usually find these fit on the small side so you may wish to consider sizing up from what you normally wear.

Introducing the new and upgraded Fuel “Division 2” jacket. A 1950s-inspired design that combines the classic looks of yesteryear with all the benefits of modern technology.

Made using tough military canvas with a water and dirt repellent treatment, and detailed with supple suede in high-use areas. Improved pattern with longer arm length for a more comfortable fit, and a waterproof lining for riding in rainy conditions. 

Three large waterproof pockets and one waterproof document pocket. A brown corduroy collar for a greater feel and style, with a high-quality neck closure using traditional leather and brass fittings.

A zip-out black liner creates insulation during the winter but can be removed in the warmer months for optimum year-round comfort. Zipped ventilation openings on the sleeves and across the shoulder at the rear create all-important airflow on that dusty track to nowhere.

Vintage style with no compromise, supplied with smooth ways CE level 2 body armor at the elbow, shoulder, and spine. Can you hear the call of the wild? 

Tech Specs

• 100% Cotton canvas black colored outer shell
• Cow Suede Leather
• Cotton blend Polyester fabric Burgundy color inner
• 125g Thermo liner (removable)
• Waterproof membrane
• Reinforced with Kevlar in impact areas
• Includes Smoothways CE level 2 body armor at elbows, shoulders, and spine
• Waxed cotton for water resistance

Fitment note: our customers usually find these fit on the small side so you may wish to consider sizing up from what you normally wear.

Introducing the new and upgraded Fuel “Division 2” jacket. A 1950s-inspired design that combines the classic looks of yesteryear with all the benefits of modern technology.

Made using tough military canvas with a water and dirt repellent treatment, and detailed with supple suede in high-use areas. Improved pattern with longer arm length for a more comfortable fit, and a waterproof lining for riding in rainy conditions. 

Three large waterproof pockets and one waterproof document pocket. A brown corduroy collar for a greater feel and style, with a high-quality neck closure using traditional leather and brass fittings.

A zip-out black liner creates insulation during the winter but can be removed in the warmer months for optimum year-round comfort. Zipped ventilation openings on the sleeves and across the shoulder at the rear create all-important airflow on that dusty track to nowhere.

Vintage style with no compromise, supplied with smooth ways CE level 2 body armor at the elbow, shoulder, and spine. Can you hear the call of the wild? 

Tech Specs

• 100% Cotton canvas dark green colored outer shell
• Cow Suede Leather
• Cotton blend Polyester fabric Burgundy color inner
• 125g Thermo liner (removable)
• Waterproof membrane
• Reinforced with Kevlar in impact areas
• Includes Smoothways CE level 2 body armor at elbows, shoulders, and spine
• Waxed cotton for water resistance

By spring of 1924, Camberley, Great Britain was hosting the first ever, official scramble.
In time, the official name for the entire sport itself became, “motocross.” The word was derived from “motocyclette” which is motorcycle in French, and the combined words “cross country.”

The “Dust Devil” boots are a tribute to a time when motocross was taking its first steps, when everything was still to be explored and developed, an exciting moment that would later lead to one of the most popular motor sports in the world.

Technical specs

• Natural crazy horse leather construction with suede leather on the front part of the boot. Crazy Horse leather is made from full-grain cowhide. A coating of natural wax is applied to the leather that gets better and more beautiful with time and usage.
• Built-in impact absorption material to provide protection in the shin and ankle area.
• Waterproof membrane to keep your feet dry
• Reinforcement in the heel area to stabilize heel position.
• Durable compound rubber outsole with anti-slip treatment.
• CE Approved. EN13634:2017

NEW FUEL MARSHAL PANTS

We are proud to introduce the most comfortable and best-fitting pants ever, no matter your shape.

***We find the Marshal Pants tend to fit small. You may want to go up a size from what you normally wear particularly if you’re in between sizes***

Thanks to the side gusset, they adapt to any rider’s body shape, and not only that, the pants are made of Fuel 3CORE fabric, so your safety is guaranteed with the maximum AAA Class certification. So, in short, these pants are the perfect combination of comfort and safety never before seen in the motorcycle market.

As you may know, technology in our field is changing and growing fast. This is why after two years of development, we created the Fuel 3CORE® fabric to guarantee customer satisfaction.

Fuel 3CORE® fabric is produced with leading-edge tri-core technology. A new revolutionary technology resulting in a lighter fabric with significantly improved performance in strength and comfort. The Fuel 3CORE® single layer, abrasion-resistant fabric with bi-stretch was exclusively developed for our products so you can leave the main road safer, lighter, and even more comfortable.

INCLUDES HIGH-PERFORMANCE KNEE AND HIP PROTECTIONS

What is Fuel 3CORE Fabric?

Technology is changing and growing fast. This is why after two years of development, we developed the FUEL 3CORE fabric, to guarantee customer satisfaction and improve our products.

Fuel 3CORE fabric is produced with leading-edge tri-core technology: a new revolutionary technology resulting in a lighter fabric with significantly improved performance in both strength and comfort. The Fuel 3CORE single layer is an abrasion-resistant fabric with bi-stretch exclusively developed for our products, so you can leave the main road safer, lighter, and even more comfortable.

The vintage Racing Division pants are made of polyester for protection and elastin material for enhanced movement. The leather knee parts help you hold the bike better and prevent the area from wearing out over time. Thanks to the adjustable side cinches and pre-curved knees, the pants are also very comfortable. Retro design with all the technology and functionality of today!

➖ Tech specs ➖

▪ Outershell: 50% polyester + 20% Elastin + 30% Leather
▪ Leather knee panels
▪ Pre-curved knee for maximum comfort
▪ Adjustable side cinches
▪ Ratchet style closure
▪ Double and triple stitching for durability
▪ Abrasion resistant materials
▪ Mesh liner
▪ Swen leather lettering

A cotton raincoat, treated with water-resistant oil, that can be worn on top of your motorcycle jacket or your off-road armor. Its unique and timeless aesthetic will make you stand out from the rest, and with time its appearance will only improve.

Inspired by the mountaineering anoraks of the mid-twentieth century.

Technical specifications

• 12 Oz oiled canvas
• Water-resistant and breathable
• 3 buttoned front pockets
• Cuff and waist adjustment
• Designed to wear over a motorcycle jacket or by itself
• Cotton lining
• Attached lined hood
• Lace-up toggled front opening
• Side openings for more comfort while riding

Introducing the Sergeant 2 Pants, highly functional riding trousers that not only look like they can take a beating, but that can perform too. The 2nd generation of Fuel's highly popular Sergeant Pants keeps the same look but with a much-improved fit. These fit much more true-to-size than the original Sergeant's. In addition, the knee armour can be adjusted up or down if needed. Quilting and suede panels give the Sergeant 2 a style of their own. This new version also comes with the FUEL 3CORE fabric, produced with leading-edge tri-core technology.

What is Fuel 3CORE Fabric?

Technology is changing and growing fast. This is why after two years of development, we developed the FUEL 3CORE fabric, to guarantee customer satisfaction and improve our products.

Fuel 3CORE fabric is produced with leading-edge tri-core technology: a new revolutionary technology resulting in a lighter fabric with significantly improved performance in both strength and comfort. The Fuel 3CORE single layer is an abrasion-resistant fabric with bi-stretch exclusively developed for our products, so you can leave the main road safer, lighter, and even more comfortable.

Introducing the Sergeant 2 Pants, highly functional riding trousers that not only look like they can take a beating, but that can perform too. The 2nd generation of Fuel's highly popular Sergeant Pants keeps the same look but with a much-improved fit. These fit much more true-to-size than the original Sergeant's. In addition, the knee armour can be adjusted up or down if needed. Quilting and suede panels give the Sergeant 2 a style of their own. This new version also comes with the FUEL 3CORE fabric, produced with leading-edge tri-core technology.

What is Fuel 3CORE Fabric?

Technology is changing and growing fast. This is why after two years of development, we developed the FUEL 3CORE fabric, to guarantee customer satisfaction and improve our products.

Fuel 3CORE fabric is produced with leading-edge tri-core technology: a new revolutionary technology resulting in a lighter fabric with significantly improved performance in both strength and comfort. The Fuel 3CORE single layer is an abrasion-resistant fabric with bi-stretch exclusively developed for our products, so you can leave the main road safer, lighter, and even more comfortable.

Shopping for someone else but not sure what to give them? Give them the gift of choice with a Strath Moto gift card.

Gift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees. You can redeem them online by entering the code received at checkout. Alternatively, they can also be redeemed in-store - just present your gift card to us at time of purchase. Easy peasy.

Goldtop England's '76 Cafe Racer leather motorcycle jacket is quite simply, a timeless piece of café racer riding apparel! Based upon the original Goldtop 1976 Scuftuf design, this jacket features black aniline cowhide, with red suede trim throughout, and Stainless Steel buckles & poppers. This jacket has comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for a Knox back protector (optional upgrade).

Note: sizes 50 and 52 are special order and as such carry an additional $100 charge already included in the price shown as compared to standard sizes.

PRODUCT INFO

• CE "AAA" Approved Protective Garment to EN 17092:2020
• 1.4mm thickness black aniline cowhide leather
• CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
• Optional Knox Micro-lock Compact back protector can be purchased here
• Quilted panels on both the shoulders and elbows
• Industrial grade hand-polished centre zip with AERO pull
• Trademark Goldtop gold quilted lining
• 2 Zipped external pockets and
• 2 Interior chest pockets
• Adjustable cuffs with ball zips
• Stainless Steel adjustable waist buckles and collar snap
• Red suede leather trim inside collar, black suede leather trim inside cuffs and zip guard
• Dropped back

Goldtop England's '76 Cafe Racer leather motorcycle jacket is quite simply, a timeless piece of café racer riding apparel! Based upon the original Goldtop 1976 Scuftuf design, this jacket comes hand-waxed, racing green aniline cowhide, with tan suede trim throughout, and Stainless Steel buckles & poppers. This jacket has comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for an optional back protector.

Available in sizes 38" to 52", and as these are hand-waxed jackets, the colour may vary slightly from jacket to jacket! Note: sizes 50 and 52 are special order and as such carry an additional $100 charge already included in the price shown as compared to standard sizes.

PRODUCT INFO

• CE "AAA" Approved Protective Garment to EN 17092:2020
• 1.4mm thickness aniline cowhide leather
• CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
• Optional Knox Micro-lock Compact back protector can be purchased here
• Quilted panels on both the shoulders and elbows
• Industrial grade hand-polished centre zip with AERO pull
• Trademark Goldtop champagne quilted lining
• 2 Zipped external pockets and
• 2 Interior chest pockets
• Adjustable cuffs with ball zips
• Stainless Steel adjustable waist buckles and collar snap
• Suede leather trim inside collar, cuffs and zip guard
• Dropped back

Goldtop England's '76 Cafe Racer leather motorcycle jacket is quite simply, a timeless piece of café racer riding apparel! Based upon the original Goldtop 1976 Scuftuf design, this jacket now comes hand-waxed, midnight blue aniline cowhide, with tan suede trim throughout, and Stainless Steel buckles & poppers. This jacket has comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for an optional back protector. 

Available in sizes 38" to 48", and as these are hand-waxed jackets, the colour may vary slightly from jacket to jacket!

PRODUCT INFO

• CE "AAA" Approved Protective Garment to EN 17092:2020
• 1.4mm thickness aniline cowhide leather
• CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
• Optional Knox Micro-lock Compact back protector can be purchased here
• Quilted panels on both the shoulders and elbows
• Industrial grade hand-polished centre zip with AERO pull
• Trademark Goldtop red quilted lining
• 2 Zipped external pockets and
• 2 Interior chest pockets
• Adjustable cuffs with ball zips
• Stainless Steel adjustable waist buckles and collar snap
• Suede leather trim inside collar, cuffs and zip guard
• Dropped back

Goldtop England's '76 Cafe Racer leather motorcycle jacket is quite simply, a timeless piece of café racer riding apparel! Based upon the original Goldtop 1976 Scuftuf design, this jacket now comes hand-waxed, brown aniline cowhide, with brown suede trim throughout, and Stainless Steel buckles & poppers. This jacket has comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for an optional back protector. 

Available in sizes 38" to 52", and as these are hand-waxed jackets, the colour may vary slightly from jacket to jacket! Note: sizes 50 and 52 are special order and as such carry an additional $100 charge already included in the price shown as compared to standard sizes.

PRODUCT INFO

• CE "AAA" Approved Protective Garment to EN 17092:2020
• 1.4mm thickness aniline cowhide leather
• CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
• Optional Knox Micro-lock Compact back protector can be purchased here
• Quilted panels on both the shoulders and elbows
• Industrial grade hand-polished centre zip with AERO pull
• Trademark Goldtop gold quilted lining
• 2 Zipped external pockets and
• 2 Interior chest pockets
• Adjustable cuffs with ball zips
• Stainless Steel adjustable waist buckles and collar snap
• Suede leather trim inside collar, cuffs and zip guard
• Dropped back

Goldtop's Bobber Jacket is a retro, classic 1970s style leather motorcycle jacket revived for modern-day riders. Featuring an asymmetric main zip, this double-breasted jacket provides protection through Knox's state of the art Micro-lock armour. It comes equipped with CE Level 1 armour in the shoulders and elbows and a pocket for an optional back protector. The jacket is manufactured from hand-selected, 1.4mm thick aniline cowhides which have each been hand-waxed, making each finished article unique, with a patina that ages beautifully with both time and wear. The whole jacket is finished by hand with a soft tan suede trim, prestige quality zips throughout, and all additional metalware being made from high-quality polished Stainless Steel.

This jacket boasts a CE "AAA" level of protection, the highest most protective level it could possibly achieve. 

Available in sizes 38" to 48". Is your size not currently available on our site? No problem; we do special orders! Contact us at info@strathmoto.com and let us know what you need.

PRODUCT INFO

• 1.4mm Aniline cowhide leather
• CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
• Optional Knox Micro-lock Compact back protector can be purchased here
• Double-stitched diamond quilting on shoulders and lower back panel
• Traditional off-centre slanted zip
• 1 Exterior vertical breast pocket
• 2 Exterior side pockets with ball zips
• 2 Interior breast pockets
• Single adjustable Stainless Steel waist buckles 
• Industrial grade hand-polished centre zip with AERO puller
• Trademark Goldtop champagne quilted lining
• Tan suede leather trim in collar & cuffs

Goldtop's Bobber Jacket is a retro, classic 1970s style leather motorcycle jacket revived for modern-day riders. Featuring an asymmetric main zip, this double-breasted jacket provides protection through Knox's state of the art Micro-lock armour. It comes equipped with CE Level 1 armour in the shoulders and elbows and a pocket for an optional back protector. The jacket is manufactured from hand-selected, 1.4mm thick aniline cowhides which have each been hand-waxed, making each finished article unique, with a patina that ages beautifully with both time and wear. The whole jacket is finished by hand with a soft tan suede trim, prestige quality zips throughout, and all additional metalware being made from high-quality polished Stainless Steel.

This jacket boasts a CE "AAA" level of protection, the highest most protective level it could possibly achieve. 

Available in sizes 38" to 48". Is your size not currently available on our site? No problem; we do special orders! Contact us at info@strathmoto.com and let us know what you need.

PRODUCT INFO

• 1.4mm Aniline cowhide leather
• CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
• Optional Knox Micro-lock Compact back protector can be purchased here
• Double-stitched diamond quilting on shoulders and lower back panel
• Traditional off-centre slanted zip
• 1 Exterior vertical breast pocket
• 2 Exterior side pockets with ball zips
• 2 Interior breast pockets
• Single adjustable Stainless Steel waist buckles 
• Industrial grade hand-polished centre zip with AERO puller
• Trademark Goldtop quilted lining - champagne colour
• Tan suede leather trim in collar & cuffs

The Bobber Motorcycle Jacket

Goldtop's Bobber Jacket is a retro, classic 1970s style leather motorcycle jacket revived for modern-day riders. Featuring an asymmetric main zip, this double-breasted jacket provides protection through Knox's state of the art Micro-lock armour. It comes equipped with CE Level 1 armour in the shoulders and elbows and a pocket for an optional back protector. The jacket is manufactured from hand-selected, 1.4mm thick aniline cowhides which have each been hand-waxed, making each finished article unique, with a patina that ages beautifully with both time and wear. The whole jacket is finished by hand with a soft tan suede trim, prestige quality zips throughout, and all additional metalware being made from high-quality polished Stainless Steel.

This jacket boasts a CE "AAA" level of protection, the highest most protective level it could possibly achieve. 

Available in sizes 38" to 52". Is your size not currently available on our site? No problem; we do special orders! Contact us at info@strathmoto.com and let us know what you need. Note: sizes 50 and 52 are special order and as such carry an additional $100 charge already included in the price shown as compared to standard sizes.

PRODUCT INFO

• 1.4mm Aniline cowhide leather
• CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
• Optional Knox Micro-lock Compact back protector can be purchased here
• Double-stitched diamond quilting on shoulders and lower back panel
• Traditional off-centre slanted zip
• 1 Exterior vertical breast pocket
• 2 Exterior side pockets with ball zips
• 2 Interior breast pockets
• Single adjustable Stainless Steel waist buckles 
• Industrial grade hand-polished centre zip with AERO puller
• Trademark Goldtop gold quilted lining
• Brown suede leather trim inside collar, cuffs, and zip guard
• Dropped back

Say hello to the Lancer, Goldtop's latest jacket, based upon the original Goldtop Scuftuf 75 Motorcycle Jacket. A jacket for modern-day riders who appreciate a subtle nod to the more traditional designs of the 1960s and 1970s!

This jacket has been specifically manufactured from only hand-selected 1.4 mm thick, black aniline cowhides, styled with an asymmetric zip with top protector flap, and has been finished by hand with a tan suede trim, blue satin lining, and the traditional ball zips you can come to expect from Goldtop jackets.

FEATURES

• 1.4mm thickness black aniline cowhide leather
• CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
• Optional Knox Micro-lock Compact back protector can be purchased here
• Industrial grade hand-polished asymmetric zip with AERO pull
• Blue quilted lining
• 3 Zipped external pockets
• 2 Interior chest pockets
• Adjustable cuffs with ball zips
• Stainless Steel collar snap and top zip cover
• Brown suede leather trim inside collar and a black suede leather trim inside cuffs

Say hello to the Lancer, Goldtop's latest jacket, based upon the original Goldtop Scuftuf 75 Motorcycle Jacket. A jacket for modern-day riders who appreciate a subtle nod to the more traditional designs of the 1960s and 1970s!

This jacket has been specifically manufactured from only hand-selected 1.4 mm thick, aniline cowhides, styled with an asymmetric zip with top protector flap, and has been finished by hand with a tan suede trim, gold satin lining, and the traditional ball zips you can come to expect from Goldtop jackets.

FEATURES

• 1.4mm thickness aniline cowhide leather
• CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
• Optional Knox Micro-lock Compact back protector can be purchased here
• Industrial grade hand-polished asymmetric zip with AERO pull
• Gold quilted lining. Note: picture shows a red-quilted lining but it's actually a gold lining similar to the waxed brown '76 cafe jacket
• 3 Zipped external pockets
• 2 Interior chest pockets
• Adjustable cuffs with ball zips
• Stainless Steel collar snap and top zip cover
• Brown suede leather trim inside collar and a black suede leather trim inside cuffs