DMD BLACK FRIDAY - SAVE 15%

Meet the RIVALE, the latest addition to the DMD family. With such an essential design it’s easy to forget there’s real innovation and technology within. Thanks to the new tri compound fiber, DMD have achieved a super compact helmet with all the modern security standards and a comfortable fit. A full-face helmet that recalls the roaring years of Motorsport. Made in Italy, with passion.

Each helmet comes with a clear visor. Dark Smoke accessory visors can be purchased separately here.

TECHNICAL DETAILS

• Full-face helmet made of tri compound fiber (carbon-kevlar-fibreglass)
  
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation meets the new 22.06 standard
  
• PIN visor closure
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then leave to air dry.

Meet the RIVALE, the latest addition to the DMD family. With such an essential design it’s easy to forget there’s real innovation and technology within. Thanks to the new tri compound fiber, DMD have achieved a super compact helmet with all the modern security standards and a comfortable fit. A full-face helmet that recalls the roaring years of Motorsport. Made in Italy, with passion.

Each helmet comes with a clear visor. Dark Smoke accessory visors can be purchased separately here.

TECHNICAL DETAILS

• Full-face helmet made of tri compound fiber (carbon-kevlar-fibreglass)
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation meets the new 22.06 standard
• PIN visor closure
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then leave to air dry.

Meet the RIVALE, the latest addition to the DMD family. With such an essential design it’s easy to forget there’s real innovation and technology within. Thanks to the new tri compound fiber, DMD has achieved a super compact helmet with all the modern security standards and a comfortable fit. A full-face helmet that recalls the roaring years of Motorsport. Made in Italy, with passion.

Each helmet comes with a clear visor. Dark Smoke accessory visors can be purchased separately here.

TECHNICAL DETAILS

• Full-face helmet made of tri compound fiber (carbon-kevlar-fibreglass)
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation meets the new 22.06 standard
• PIN visor closure
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then leave to air dry.

Meet the RIVALE, the latest addition to the DMD family. With such an essential design it’s easy to forget there’s real innovation and technology within. Thanks to the new tri compound fiber, DMD have achieved a super compact helmet with all the modern security standards and a comfortable fit. A full-face helmet that recalls the roaring years of Motorsport. Made in Italy, with passion.

Each helmet comes with a clear visor. Dark Smoke accessory visors can be purchased separately here.

TECHNICAL DETAILS

• Full-face helmet made of tri compound fiber (carbon-kevlar-fibreglass)
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation meets the new 22.06 standard 
• PIN visor closure
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then leave to air dry.

The SeventyFive is a tribute to the stylish icon of the 70’S. The helmet is a play on the design of the Racer model and the name comes from the year when the company was born. The helmet has slotted air vents to increase ventilation and it has 3 snaps to allow for fitment of DMD's snap-on visor. It has a space large enough to accommodate most goggles. This model is also compatible with DMD's new SeventyFive Goggle  and with the DMD Ghost goggles.

The Oro Collection takes the SeventyFive line up and kicks it up a few notches incorporating a carbon kevlar shell, Italian leather trim and an inner lining made of leather and Shalimar. It is the result of the perfect union of the best Italian leather and DMD craftsmen’s skilled hands.

TECHNICAL DETAILS

• Carbon kevlar shell
• Italian leather trim
• Inner lining made of leather and Shalimar, removable and washable.
• Padded chin strap with Double D-ring closure
• ECE Homologation
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing then permit to air dry whenever possible to prevent heat damage.

The SeventyFive is a tribute to the stylish icon of the 70’S. The helmet is a play on the design of the Racer model and the name comes from the year when the company was born. The helmet has slotted air vents to increase ventilation and it has 3 snaps to allow for fitment of DMD's snap-on visor. It has a space large enough to accommodate most goggles. This model is also compatible with DMD's new SeventyFive Goggle  and with the DMD Ghost goggles.

The Oro Collection takes the SeventyFive line up and kicks it up a few notches incorporating a carbon kevlar shell, Italian leather trim and an inner lining made of leather and Shalimar. It is the result of the perfect union of the best Italian leather and DMD craftsmen’s skilled hands.

TECHNICAL DETAILS

• Carbon kevlar shell
• Italian leather trim
• Inner lining made of leather and Shalimar, removable and washable.
• Padded chin strap with Double D-ring closure
• ECE Homologation
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing then permit to air dry whenever possible to prevent heat damage.

The SeventyFive is a tribute to the stylish icon of the 70’S. The helmet is a play on the design of the Racer model and the name comes from the year when the company was born. The helmet has slotted air vents to increase ventilation and it has 3 snaps to allow for fitment of DMD's snap-on visor. It has a space large enough to accommodate most goggles. This model is also compatible with DMD's new SeventyFive Goggle  and with the DMD Ghost goggles.

TECHNICAL DETAILS

• Carbon kevlar shell
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing then permit to air dry whenever possible to prevent heat damage.

The jet Retro Rainbow helmet is simple yet striking thanks to the glitter finish that complements a monochrome silver base. The fit is comfortable and meets all modern safety requirements. Suitable for those who like simple lines and an essential design on their motorcycle.

KEY FEATURES

Simple but impressive: glitter gives a special note where simplicity meets perfection.

Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.

Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell

TECHNICAL DETAILS:

• Helmet weight: 900 gr +/- 50.
• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
• Shell 2: L - 58 cm
• Shell 3: XL - 59/60 cm; XXL - 61 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE 22.06 Homologation

PRODUCT CARE

• The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
• Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
• To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.

The jet Retro Rainbow Violet helmet is simple yet striking thanks to the glitter finish that complements a monochrome purple base. The fit is comfortable and meets all modern safety requirements. Suitable for those who like simple lines and an essential design on their motorcycle.

KEY FEATURES

Simple but impressive: glitter gives a special note where simplicity meets perfection.

Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.

Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell

TECHNICAL DETAILS:

• Helmet weight: 900 gr +/- 50.
• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
• Shell 2: L - 58 cm
• Shell 3: XL - 59/60 cm; XXL - 61 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE 22.06 Homologation

PRODUCT CARE

• The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
• Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
• To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.

The jet Retro Rainbow Green helmet is simple yet striking thanks to the glitter finish that complements a monochrome green base. The fit is comfortable and meets all modern safety requirements. Suitable for those who like simple lines and an essential design on their motorcycle.

KEY FEATURES

Simple but impressive: glitter gives a special note where simplicity meets perfection.

Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.

Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell

TECHNICAL DETAILS:

• Helmet weight: 900 gr +/- 50.
• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
• Shell 2: L - 58 cm
• Shell 3: XL - 59/60 cm; XXL - 61 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE 22.06 Homologation

PRODUCT CARE

• The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
• Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
• To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.

The jet Retro Deep Green helmet is part of the single-color range and comes in a shiny green finish. Safe, comfortable, and compact in size, it fits perfectly on any type of motorcycle, be it Custom, Vintage, or Cafe Racer.

KEY FEATURES

Simple but impressive: glitter gives a special note where simplicity meets perfection.

Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.

Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell

TECHNICAL DETAILS:

• Helmet weight: 900 gr +/- 50.
• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
• Shell 2: L - 58 cm
• Shell 3: XL - 59/60 cm; XXL - 61 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE 22.06 Homologation

PRODUCT CARE

• The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
• Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
• To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.

The DMD Ghost Goggles are compatible for use with the Vintage, Racer and SeventyFive helmets as well as numerous other makes and models of helmets.

PRODUCT DETAILS

• The design is reminiscent of the goggles used in the seventies.
• Black injected polycarbonate frame
• Bi-material facial foam rubber + gray velvet, foam rubber ventilations specific for bikes
• Available in clear or smoke anti-scratch/anti-fog lens, which are both CE approved
• Yellow lens available as an interchangeable accessory here.

PRODUCT CARE

The DMD goggle lenses are anti-scratch and are very strong and durable, but they can get damaged. Take care not to expose the lens to any chemicals. Lens cleaning should be done only with warm water, mild soap and a micro fiber cloth.

The DMD Ghost Goggles are compatible for use with the Vintage, Racer and SeventyFive helmets as well as numerous other makes and models of helmets.

PRODUCT DETAILS

• The design is reminiscent of the goggles used in the seventies.
• Black injected polycarbonate frame
• Bi-material facial foam rubber + gray velvet, foam rubber ventilations specific for bikes
• Available in clear or smoke anti-scratch/anti-fog lens, which are both CE approved
• Yellow lens available as an interchangeable accessory here.

PRODUCT CARE

The DMD goggle lenses are anti-scratch and are very strong and durable, but they can get damaged.

Take care not to expose the lens to any chemicals. Lens cleaning should be done only with warm water, mild soap and a micro fiber cloth.

The DMD Flip-Up Shield may be instantly lifted up, away from face, and is always handy for immediate use. Can be worn over ordinary glasses.

Fits stock 3-snap visor configuration on most open-face helmets including Biltwell Bonanza, Bell Custom 500, and DMD Vintage Jet Helmets. 

New goggle specifically made for the SeventyFive helmet by DMD. Allows for comfort and protection while riding and can be worn over ordinary glasses. Available in Clear and Smoke. One size.

PRODUCT CARE

The DMD visors are anti-scratch. These shields are very strong and durable, but they can get damaged.

Take care not to expose your shield to any chemicals. Visor cleaning should be done only with warm water, mild soap and a micro fiber cloth.

Visor designed exclusively for DMD Rivale ECE 22.06 helmets. Available in Clear and Smoke tint.

PRODUCT CARE

DMD visors are anti-scratch. The shields are very strong and durable, but they can get damaged.

Take care not to expose your shield to any chemicals. Visor cleaning should be done only with warm water, mild soap and a micro fiber cloth.

New goggle specifically made for the Racer helmet by DMD. Allows for comfort and protection while riding and can be worn over ordinary glasses. Clear and Smoke options. One size.

PRODUCT CARE

The DMD visors are anti-scratch. These shields are very strong and durable, but they can get damaged.

Take care not to expose your shield to any chemicals. Visor cleaning should be done only with warm water, mild soap and a micro fiber cloth.

Visor designed exclusively for DMD Rivale helmet. Available in Clear and Smoke tint.

PRODUCT CARE

DMD visors are anti-scratch. The shields are very strong and durable, but they can get damaged.

Take care not to expose your shield to any chemicals. Visor cleaning should be done only with warm water, mild soap and a micro fiber cloth.

The DMD Shield (a.k.a. "Big Visor") offers good face protection, and is flexible, flat and easy to carry until ready to use. Can be worn over ordinary glasses.

Fits stock 3-snap visor configuration on most open-face helmets including Biltwell Bonanza, Bell Custom 500, and DMD Vintage Jet Helmets. 

Snap-on shield for the DMD SeventyFive full-face helmet. Available in clear and smoke. One size.

PRODUCT CARE

The DMD visors are anti-scratch. The shields are very strong and durable, but they can get damaged.

Take care not to expose your shield to any chemicals. Visor cleaning should be done only with warm water, mild soap and a micro fiber cloth.

The Stay Punk t-shirt is made for maximum comfort. It is a four-season garment, 100% made of cotton, and black in colour because only black will do. It features an iconic silk-screen printing that recalls the punk culture of the 80s.

100% Made in Italy.

Machine washable at 30 degrees Celsius.

This visor is specifically designed to fit the DMD P1 Jet Helmet. Available in clear and smoke. One size. 

PRODUCT CARE

DMD visors are anti-scratch. The shields are very strong and durable, but they can get damaged.

Take care not to expose your shield to any chemicals. Visor cleaning should be done only with warm water, mild soap and a micro fiber cloth.

Snap-on shield for the DMD Racer Helmet. Available in clear and smoke.

PRODUCT CARE

The DMD visors are anti-scratch. The shields are very strong and durable, but they can get damaged.

Take care not to expose your shield to any chemicals. Visor cleaning should be done only with warm water, mild soap and a micro fiber cloth.

Replacement liner for the DMD Retro helmet.

Fits stock 3-snap visor configuration on most helmets.

Fits most helmets having 3 button snaps, including Biltwell Gringo, Biltwell Bonanza, Bell Custom 500, and DMD Vintage Jet Helmets. 

Can be flipped-up when combined with the aluminium or plastic flip-up mechanism

Does NOT fit Biltwell Gringo S or SV!

DMD Neck Tubes/Gaiters keep wind and road debris off your face and look good doing it. As an added bonus, DMD neck gaiters are reversible.

Made with patented antibacterial fabrics, DMD neck gaiters have a silver chloride biocide treatment.

Details:

• Handmade in Italy
• Reversible
• 89% Cotton 11% Elastane
• Antibacterial properties are preserved for up to 30 washes
• Machine wash 30°
• MADE IN ITALY

DMD Neck Tubes/Gaiters keep wind and road debris off your face and look good doing it. As an added bonus, DMD neck gaiters are reversible.

Made with patented antibacterial fabrics, DMD neck gaiters have a silver chloride biocide treatment that protects the surface from contamination by bacteria and viruses, including COVID.

Details:

• Handmade in Italy
• Reversible
• 89% Cotton 11% Elastane
• Antibacterial properties preserved for up to 30 washes
• Machine wash 30°
• MADE IN ITALY
• Note: NOT A MEDICAL DEVICE.

DMD Neck Tubes/Gaiters keep wind and road debris off your face and look good doing it. As an added bonus, DMD neck gaiters are reversible.

Made with patented antibacterial fabrics, DMD neck gaiters have a silver chloride biocide treatment that protects the surface from contamination by bacteria and viruses, including COVID.

Details:

• Handmade in Italy
• Reversible
• 89% Cotton 11% Elastane
• Antibacterial properties preserved for up to 30 washes
• Machine wash 30°
• MADE IN ITALY
• Note: NOT A MEDICAL DEVICE.

DMD Neck Tubes/Gaiters keep wind and road debris off your face and look good doing it. As an added bonus, DMD neck gaiters are reversible.

Made with patented antibacterial fabrics, DMD neck gaiters have a silver chloride biocide treatment that protects the surface from contamination by bacteria and viruses, including COVID.

Details:

• Handmade in Italy
• Reversible
• 89% Cotton 11% Elastane
• Antibacterial properties preserved for up to 30 washes
• Machine wash 30°
• MADE IN ITALY
• Note: NOT A MEDICAL DEVICE.

DMD Neck Tubes/Gaiters keep wind and road debris off your face and look good doing it. As an added bonus, DMD neck gaiters are reversible.

Made with patented antibacterial fabrics, DMD neck gaiters have a silver chloride biocide treatment that protects the surface from contamination by bacteria and viruses, including COVID.

Details:

• Handmade in Italy
• Reversible
• 89% Cotton 11% Elastane
• Antibacterial properties preserved for up to 30 washes
• Machine wash 30°
• MADE IN ITALY
• Note: NOT A MEDICAL DEVICE.

DMD Neck Tubes/Gaiters keep wind and road debris off your face and look good doing it. As an added bonus, DMD neck gaiters are reversible.

Made with patented antibacterial fabrics, DMD neck gaiters have a silver chloride biocide treatment that protects the surface from contamination by bacteria and viruses, including COVID.

Details:

• Handmade in Italy
• Reversible
• 89% Cotton 11% Elastane
• Antibacterial properties preserved for up to 30 washes
• Machine wash 30°
• MADE IN ITALY
• Note: NOT A MEDICAL DEVICE.

DMD Neck Tubes/Gaiters keep wind and road debris off your face and look good doing it. As an added bonus, DMD neck gaiters are reversible.

Made with patented antibacterial fabrics, DMD neck gaiters have a silver chloride biocide treatment that protects the surface from contamination by bacteria and viruses, including COVID.

Details:

• Handmade in Italy
• Reversible
• 89% Cotton 11% Elastane
• Antibacterial properties preserved for up to 30 washes
• Machine wash 30°
• MADE IN ITALY
• Note: NOT A MEDICAL DEVICE.

DMD Neck Tubes/Gaiters keep wind and road debris off your face and look good doing it. As an added bonus, DMD neck gaiters are reversible.

Made with patented antibacterial fabrics, DMD neck gaiters have a silver chloride biocide treatment that protects the surface from contamination by bacteria and viruses, including COVID.

Details:

• Handmade in Italy
• Reversible
• 89% Cotton 11% Elastane
• Antibacterial properties preserved for up to 30 washes
• Machine wash 30°
• MADE IN ITALY
• Note: NOT A MEDICAL DEVICE.

DMD Neck Tubes/Gaiters keep wind and road debris off your face and look good doing it. As an added bonus, DMD neck gaiters are reversible.

Made with patented antibacterial fabrics, DMD neck gaiters have a silver chloride biocide treatment that protects the surface from contamination by bacteria and viruses, including COVID.

Details:

• Handmade in Italy
• Reversible
• 89% Cotton 11% Elastane
• Antibacterial properties preserved for up to 30 washes
• Machine wash 30°
• MADE IN ITALY
• Note: NOT A MEDICAL DEVICE.

Back protector insert for pocket with 10 large ventilation holes. Produced in ViscoFlex foam (new soft, high-performance formula). CE Level 1 Back Protector Made by Italian Firm Safe Tech. Fits DMD Jackets, Original Driver Jackets, and other jackets with a similarly-shaped back protector pocket. 

The OFF ROAD peak is inspired by iconic MX bikes from the 70’s.

Features 

• Cross/enduro sun visor, with adjustable press studs.
• It fits any Vintage jet helmet and most helmets having 3 button snaps, including Biltwell Gringo, Biltwell Bonanza, Bell Custom 500, DMD Vintage, and DMD SeventyFive Helmets. Note: we have found that the off-road peak does NOT fit the smaller shell size of the DMD SeventyFive helmet so it is recommended to be used only on size L, XL, or XXL DMD SeventyFive helmets.
• Available in 3 different colors: white, black and red

• Fits the Ghost Goggles
• Anti-scratch and anti fog certified product.
• Easy way to change lens
• High visibility lens
• The DMD visors are anti-scratch. All the shields are very strong and durable, but they can get damaged. Take care not to expose your shield to any chemicals. Visor cleaning should be done only with warm water, mild soap and a micro fiber cloth.