REV'IT! SAND 5 H20 LADIES JACKET - SILVER-ANTHRACITE
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Multi-season, multi-purpose, female-specific textile jacket for the adventure-hungry traveler
Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.
REV'IT! SAND 5 H20 JACKET - SAND-BLUE
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Multi-season, multi-purpose textile jacket for the adventure-hungry traveler.
REV'IT! SAND 5 H20 JACKET - BLACK-ANTHRACITE
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Multi-season, multi-purpose textile jacket for the adventure-hungry traveler.
REV'IT! SAND 4 H20 LADIES JACKET
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Description
For many years, the Sand outfit has been the go-to choice for female riders looking for a rugged and versatile jacket and pants combination that is fully prepared to take on any challenging adventure on or off-road. Hot, wet, or cold weather will not stop you from reaching your destination, wherever the road may lead you. The Sand 4 H2O Ladies is the ultimate women’s adventure riding jacket. The tough yet lightweight, abrasion-resistant outer shell is engineered to last a multitude of around-the-world trips and is designed to provide excellent freedom of movement for the most demanding and technical riding situations. For maximum impact protection, the Sand 4 H2O Ladies includes our award-winning, industry-leading SEEFLEX™ CE-level 2 protectors at the shoulders and elbows. It also comes prepared for the optional and equally impressive SEESOFT™ CE-level 2 insert back protector. You’re ready to tackle any challenge with this jacket. When we say the Sand 4 H2O Ladies jacket is versatile, we mean that it is prepared for any climate you might encounter, and that it allows you to configurate it in the best possible way to ensure maximum comfort. Every layer is removable and separately wearable, from the waterproof hydratex® membrane to the insulated winter lining. Changing seasons or weather conditions won’t deter you from getting on your bike, you’re ready for it all. Multiple adjustment straps and tabs on the arms, and variable height adjustment straps at the waist will ensure the perfect fit to your body with or without the liners installed. If you are looking for airflow, this jacket has plenty of options that allow you to regulate the amount of wind that blows towards your body. The main front zipper can be zipped open to reveal a mesh ventilation panel that enables cool air to travel into the jacket. At the front, we have 2 ventilation panels which can be held open by a special tab connected to a press button on the outside of the jacket. With all 3 front ventilation panels open, in combination with the 2 rear-vent zippers, they will create an incredible amount of airflow through the entire jacket. Combined with the multiple ventilation zippers running across the arms, this jacket will keep you cool and comfortable in higher temperatures. The 2 front pockets, big rear pocket and 2 inner pockets provide ample storage space so you can bring all your essentials along for the ride, and keep them close. The back pocket is even large enough to store the liners when not in use. All the outside pockets can be closed with zippers to make sure you will not lose your valuable possessions during the ride. Durable, versatile and practical. The highest specifications regarding tear, cut and abrasion resistance and top-notch impact armor. The Sand 4 H2O Ladies jacket has it all and is ready for your next ride around the world.
Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.
REV'IT! SAND 4 H20 JACKET - SILVER BLACK
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Description
For many years, the Sand outfit has been the go-to choice for riders looking for a rugged and versatile jacket and pants combination that is fully prepared to take on any challenging adventure on or off-road. Hot, wet, or cold weather will not stop you from reaching your destination, wherever the road may lead you. This jacket will take you anywhere in style and total comfort. Meet the 4th generation of this iconic piece. Meet the Sand 4 H2O jacket. The tough yet lightweight, abrasion-resistant outer shell is engineered to last a multitude of around-the-world trips and is designed to provide excellent freedom of movement for the most demanding and technical riding situations.
For maximum impact protection, the Sand 4 H2O includes our award-winning, industry-leading SEEFLEX™ CE-level 2 protectors at the shoulders and elbows. It also comes prepared for the optional and equally impressive SEESOFT™ CE-level 2 insert back protector. You’re ready to tackle any challenge with this jacket. When we say the Sand 4 H2O jacket is versatile, we mean that it is prepared for any climate you might encounter, and that it allows you to configurate it in the best possible way to ensure maximum comfort. Every layer is removable and separately wearable, from the waterproof hydratex® membrane to the insulated winter lining. Changing seasons or weather conditions won’t deter you from getting on your bike, you’re ready for it all. Multiple adjustment straps and tabs on the arms, and variable height adjustment straps at the waist will ensure the perfect fit to your body with or without the liners installed.
If you are looking for airflow, this jacket has plenty of options that allow you to regulate the amount of wind that blows towards your body. It features 3 ventilation panels on the front, 4 ventilation zippers on the arms, and 2 exhaust vents zipper on the back. The 2 front pockets, big rear pocket, and 2 inner pockets provide ample storage space so you can bring all your essentials along for the ride and keep them close. The back pocket is even large enough to store the liners when not in use. All the outside pockets can be closed with zippers to make sure you won’t lose your valuable possessions during the ride. Durable, versatile, and practical.
The highest specifications regarding tear, cut and abrasion-resistance and top-notch impact armor. The Sand 4 H2O jacket has it all and is ready for your next ride around the world.
Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.
Adjustability
Storage
Lining
Features
REV'IT! SAND 4 H20 JACKET - GREY-ORANGE
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Description
For many years, the Sand outfit has been the go-to choice for riders looking for a rugged and versatile jacket and pants combination that is fully prepared to take on any challenging adventure on or off-road. Hot, wet, or cold weather will not stop you from reaching your destination, wherever the road may lead you. This jacket will take you anywhere in style and total comfort. Meet the 4th generation of this iconic piece. Meet the Sand 4 H2O jacket. The tough yet lightweight, abrasion-resistant outer shell is engineered to last a multitude of around-the-world trips and is designed to provide excellent freedom of movement for the most demanding and technical riding situations.
For maximum impact protection, the Sand 4 H2O includes our award-winning, industry-leading SEEFLEX™ CE-level 2 protectors at the shoulders and elbows. It also comes prepared for the optional and equally impressive SEESOFT™ CE-level 2 insert back protector. You’re ready to tackle any challenge with this jacket. When we say the Sand 4 H2O jacket is versatile, we mean that it is prepared for any climate you might encounter, and that it allows you to configurate it in the best possible way to ensure maximum comfort. Every layer is removable and separately wearable, from the waterproof hydratex® membrane to the insulated winter lining. Changing seasons or weather conditions won’t deter you from getting on your bike, you’re ready for it all. Multiple adjustment straps and tabs on the arms, and variable height adjustment straps at the waist will ensure the perfect fit to your body with or without the liners installed.
If you are looking for airflow, this jacket has plenty of options that allow you to regulate the amount of wind that blows towards your body. It features 3 ventilation panels on the front, 4 ventilation zippers on the arms, and 2 exhaust vents zipper on the back. The 2 front pockets, big rear pocket, and 2 inner pockets provide ample storage space so you can bring all your essentials along for the ride and keep them close. The back pocket is even large enough to store the liners when not in use. All the outside pockets can be closed with zippers to make sure you won’t lose your valuable possessions during the ride. Durable, versatile, and practical.
The highest specifications regarding tear, cut and abrasion-resistance and top-notch impact armor. The Sand 4 H2O jacket has it all and is ready for your next ride around the world.
Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.
Adjustability
Storage
Lining
Features
REV'IT! SAND 4 H20 JACKET - CAMO BROWN
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Description
For many years, the Sand outfit has been the go-to choice for riders looking for a rugged and versatile jacket and pants combination that is fully prepared to take on any challenging adventure on or off-road. Hot, wet, or cold weather will not stop you from reaching your destination, wherever the road may lead you. This jacket will take you anywhere in style and total comfort. Meet the 4th generation of this iconic piece. Meet the Sand 4 H2O jacket. The tough yet lightweight, abrasion-resistant outer shell is engineered to last a multitude of around-the-world trips and is designed to provide excellent freedom of movement for the most demanding and technical riding situations.
For maximum impact protection, the Sand 4 H2O includes our award-winning, industry-leading SEEFLEX™ CE-level 2 protectors at the shoulders and elbows. It also comes prepared for the optional and equally impressive SEESOFT™ CE-level 2 insert back protector. You’re ready to tackle any challenge with this jacket. When we say the Sand 4 H2O jacket is versatile, we mean that it is prepared for any climate you might encounter, and that it allows you to configurate it in the best possible way to ensure maximum comfort. Every layer is removable and separately wearable, from the waterproof hydratex® membrane to the insulated winter lining. Changing seasons or weather conditions won’t deter you from getting on your bike, you’re ready for it all. Multiple adjustment straps and tabs on the arms, and variable height adjustment straps at the waist will ensure the perfect fit to your body with or without the liners installed.
If you are looking for airflow, this jacket has plenty of options that allow you to regulate the amount of wind that blows towards your body. It features 3 ventilation panels on the front, 4 ventilation zippers on the arms, and 2 exhaust vents zipper on the back. The 2 front pockets, big rear pocket, and 2 inner pockets provide ample storage space so you can bring all your essentials along for the ride and keep them close. The back pocket is even large enough to store the liners when not in use. All the outside pockets can be closed with zippers to make sure you won’t lose your valuable possessions during the ride. Durable, versatile, and practical.
The highest specifications regarding tear, cut and abrasion-resistance and top-notch impact armor. The Sand 4 H2O jacket has it all and is ready for your next ride around the world.
Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.
Adjustability
Storage
Lining
Features
REV'IT! SAND 4 H20 JACKET - BLACK
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Description
For many years, the Sand outfit has been the go-to choice for riders looking for a rugged and versatile jacket and pants combination that is fully prepared to take on any challenging adventure on or off-road. Hot, wet, or cold weather will not stop you from reaching your destination, wherever the road may lead you. This jacket will take you anywhere in style and total comfort. Meet the 4th generation of this iconic piece. Meet the Sand 4 H2O jacket. The tough yet lightweight, abrasion-resistant outer shell is engineered to last a multitude of around-the-world trips and is designed to provide excellent freedom of movement for the most demanding and technical riding situations.
For maximum impact protection, the Sand 4 H2O includes our award-winning, industry-leading SEEFLEX™ CE-level 2 protectors at the shoulders and elbows. It also comes prepared for the optional and equally impressive SEESOFT™ CE-level 2 insert back protector. You’re ready to tackle any challenge with this jacket. When we say the Sand 4 H2O jacket is versatile, we mean that it is prepared for any climate you might encounter, and that it allows you to configurate it in the best possible way to ensure maximum comfort. Every layer is removable and separately wearable, from the waterproof hydratex® membrane to the insulated winter lining. Changing seasons or weather conditions won’t deter you from getting on your bike, you’re ready for it all. Multiple adjustment straps and tabs on the arms, and variable height adjustment straps at the waist will ensure the perfect fit to your body with or without the liners installed.
If you are looking for airflow, this jacket has plenty of options that allow you to regulate the amount of wind that blows towards your body. It features 3 ventilation panels on the front, 4 ventilation zippers on the arms, and 2 exhaust vents zipper on the back. The 2 front pockets, big rear pocket, and 2 inner pockets provide ample storage space so you can bring all your essentials along for the ride and keep them close. The back pocket is even large enough to store the liners when not in use. All the outside pockets can be closed with zippers to make sure you won’t lose your valuable possessions during the ride. Durable, versatile, and practical.
The highest specifications regarding tear, cut and abrasion-resistance and top-notch impact armor. The Sand 4 H2O jacket has it all and is ready for your next ride around the world.
Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.
Adjustability
Storage
Lining
Features
REV'IT! SAND 5 H20 PANTS - BLACK
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Multi-season, multi-purpose textile pants for the adventure-hungry traveler.
REV'IT! SAND 4 H20 PANTS
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Description
The Sand 4 H2O are an incredibly versatile pair of riding pants that will enable the most adventurous riders out there to explore the best roads and trails of the world on two wheels, in any environment, in any season. The Sand 4 H2O pants sport the same Swiss Army Knife-like versatility as the jacket when it comes to features. From the outside in, you will find a highly abrasion-resistant but lightweight outer shell equipped with height adjustable SEEFLEX™ CE-level 2 knee and CE-level 1 SEESMART™ hip protectors. Underneath the rugged outer shell, there’s the detachable, breathable waterproof hydratex® liner that will keep you comfortable and dry in wet conditions. To top it all off - and allow you to challenge colder conditions - we also installed a snug removable thermal liner. With both liners removed, you can direct air to your legs by opening the VCS zippers located next to the waterproof stash pockets, which provide plenty of storage space for your essentials. Zippers on the pockets make sure that your possessions stay where they should be. Adjustment straps on hips ensure a perfect fit to your body with or without liners installed. The adjustment straps and tabs on the calves and ankles make sure the fit can be adjusted to use the pants with any type of motorcycle boot. Thanks to the grip panel around back, the Sand 4 H2O pants prevent you from sliding on the seat under acceleration or braking. Laminated reflection on the calves ensures you remain visible in the dark. Go further.
Adjustability
Storage
Features
REV'IT! SAND 4 H20 LADIES PANTS
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Description
The Sand 4 H2O Ladies are an incredibly versatile pair of female-specific riding pants that will enable the most adventurous riders out there to explore the best roads and trails of the world on two wheels, in any environment, in any season. The Sand 4 H2O Ladies pants sport the same Swiss Army Knife-like versatility as the jacket when it comes to features. From the outside in, you will find a highly abrasion-resistant but lightweight outer shell equipped with height adjustable SEEFLEX™ CE-level 2 knee and CE-level 1 SEESMART™ hip protectors. Underneath the rugged outer shell, there’s the detachable, breathable waterproof hydratex® liner that will keep you comfortable and dry in wet conditions. To top it all off - and allow you to challenge colder conditions - we also installed a snug removable thermal liner. With both liners removed, you can direct air to your legs by opening the VCS zippers located next to the waterproof stash pockets, which provide plenty of storage space for your essentials. Zippers on the pockets make sure that your possessions stay where they should be. Adjustment straps on hips ensure a perfect fit to your body with or without liners installed. The adjustment straps and tabs on the calves and ankles make sure the fit can be adjusted to use the pants with any type of motorcycle boot. Thanks to the grip panel around back, the Sand 4 H2O Ladies pants prevent you from sliding on the seat under acceleration or braking. Laminated reflection on the calves ensures you remain visible in the dark. Go further.
Adjustability
Storage
Lining
Features
REV'IT! SAND 4 H20 GLOVES - BLACK
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Description
The Sand 4 H2O gloves are the go-to gloves for the rider that doesn’t let grey skies and the possibility of rain get in the way of his riding plans. These gloves have been engineered specifically for riding on or off-road during unstable weather conditions in spring, summer or fall. Their foundation is based on the iconic Sand 4 gloves but the design team traded in ventilation for waterproofing. They did that by incorporating a waterproof and breathable Hydratex® Z-liner. The gloves offer almost the same high level of dexterity and feel on the grips and levers as the Sand 4 gloves all while keeping your hands comfortable and dry during the whole ride. Stretch material is used on the top of the glove to increase flexibility and freedom of movement on the controls of your bike. They also feature a new TPR knuckle protector, designed especially for these gloves. Additional protection is provided by TPR sliders on the fingers, thumb and palm. Thanks to the rugged pull tab on the cuff, slipping on these gloves is a breeze and you can secure them in place with the hook-and-loop closure followed by the hook-and-loop wrist strap. We added extra reflective elements on the gloves for increased visibility during inclement weather conditions or nighttime riding. If you want to adjust your route during your journey, the integrated Connect Finger Tip makes sure you can control your touchscreen device with the gloves on. Ride on in the rain.
Features
Connect Finger Tip
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
Grip panel at palm
This part at the inside of the knees gives you extra grip for ultimate control in the corners. It also protects the leather from wear and tear.
Pull tab
Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
Regular cuff
Visor wiper
The material used on the index finger of the glove has a visor wipe function. It helps clear water or moisture off the visor for better visibility when riding in wet weather.
REV'IT! SAND 4 LADIES GLOVES-BLACK
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Description
Although the Sand 4 Ladies gloves have been designed to create a perfect match with the Sand 4 H2O Ladies outfit, these gloves are bound to become the go-to gloves for a large audience of female adventure riders across the globe. These are not just smaller versions of the men’s model, but have been specifically designed using our female-specific fit glove pattern. These gloves have been specifically designed and engineered for summer use, providing optimal grip, breathability, and ventilation. To make sure your hands stay cool and dry during hot summer rides, the gloves are constructed of strong and abrasion-resistant mesh stretch fabrics combined with a high-tech TPR knuckle protector that is designed to direct the airflow into the glove and onto the hands of the rider. Multiple perforation holes on the outside and inside increase the breathability even more. For additional protection, we added TPR protectors on the fingers and thumbs; providing a high level of protection without compromising on comfort or flexibility. A TPR palm slider ensures a controlled slide in case of an unfortunate mishap. The gloves can easily be put on thanks to the handy pull tab on the cuff and then secured with the hook-and-loop wrist strap. Adjusting your route during your journey is a breeze thanks to the integrated Connect Finger Tip which makes it possible to control your touchscreen device while leaving your gloves on. Enjoy the summer breeze with the Sand 4 Ladies gloves.
Features
Connect Finger Tip
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
Grip panel at palm
This part at the inside of the knees gives you extra grip for ultimate control in the corners. It also protects the leather from wear and tear.
Outside stitching
The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.
Pull tab
Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
Regular cuff
REV'IT! SAND 4 GLOVES - GREY-BLACK
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Description
Although the Sand 4 gloves have been designed to create a perfect match with the Sand 4 H2O outfit, these gloves are bound to become the go-to gloves for a large audience of adventure riders across the globe. This pair of hand protection has been specifically designed and engineered for summer use, providing optimal grip, breathability, and ventilation. To make sure your hands stay cool and dry during hot summer rides, the gloves are constructed of strong and abrasion-resistant mesh stretch fabrics combined with a high-tech TPR knuckle protector that is designed to direct the airflow into the glove and onto the hands of the rider. Multiple perforation holes on the outside and inside increase the breathability even more. For additional protection, we added TPR protectors on the fingers and thumbs; providing a high level of protection without compromising comfort or flexibility. A TPR palm slider ensures a controlled slide in case of an unfortunate mishap. The gloves can easily be put on thanks to the handy pull tab on the cuff and then secured with the hook-and-loop wrist strap. Adjusting your route during your journey is a breeze thanks to the integrated Connect Finger Tip which makes it possible to control your touchscreen device while leaving your gloves on. Enjoy the summer breeze with the Sand 4 gloves.
Features
Connect Finger Tip
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
Grip panel at palm
This part at the inside of the knees gives you extra grip for ultimate control in the corners. It also protects the leather from wear and tear.
Outside stitching
The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.
Pull tab
Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
Regular cuff
REV'IT! SAND 4 GLOVES - BLACK
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Description
Although the Sand 4 gloves have been designed to create a perfect match with the Sand 4 H2O outfit, these gloves are bound to become the go-to gloves for a large audience of adventure riders across the globe. This pair of hand protection has been specifically designed and engineered for summer use, providing optimal grip, breathability, and ventilation. To make sure your hands stay cool and dry during hot summer rides, the gloves are constructed of strong and abrasion-resistant mesh stretch fabrics combined with a high-tech TPR knuckle protector that is designed to direct the airflow into the glove and onto the hands of the rider. Multiple perforation holes on the outside and inside increase the breathability even more. For additional protection, we added TPR protectors on the fingers and thumbs; providing a high level of protection without compromising comfort or flexibility. A TPR palm slider ensures a controlled slide in case of an unfortunate mishap. The gloves can easily be put on thanks to the handy pull tab on the cuff and then secured with the hook-and-loop wrist strap. Adjusting your route during your journey is a breeze thanks to the integrated Connect Finger Tip which makes it possible to control your touchscreen device while leaving your gloves on. Enjoy the summer breeze with the Sand 4 gloves.
Features
Connect Finger Tip
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
Grip panel at palm
This part at the inside of the knees gives you extra grip for ultimate control in the corners. It also protects the leather from wear and tear.
Outside stitching
The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.
Pull tab
Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
Regular cuff
REV'IT! SAND 4 GLOVES - BROWN-BLACK
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Description
Although the Sand 4 gloves have been designed to create a perfect match with the Sand 4 H2O outfit, these gloves are bound to become the go-to gloves for a large audience of adventure riders across the globe. This pair of hand protection has been specifically designed and engineered for summer use, providing optimal grip, breathability, and ventilation. To make sure your hands stay cool and dry during hot summer rides, the gloves are constructed of strong and abrasion-resistant mesh stretch fabrics combined with a high-tech TPR knuckle protector that is designed to direct the airflow into the glove and onto the hands of the rider. Multiple perforation holes on the outside and inside increase the breathability even more. For additional protection, we added TPR protectors on the fingers and thumbs; providing a high level of protection without compromising comfort or flexibility. A TPR palm slider ensures a controlled slide in case of an unfortunate mishap. The gloves can easily be put on thanks to the handy pull tab on the cuff and then secured with the hook-and-loop wrist strap. Adjusting your route during your journey is a breeze thanks to the integrated Connect Finger Tip which makes it possible to control your touchscreen device while leaving your gloves on. Enjoy the summer breeze with the Sand 4 gloves.
Features
Connect Finger Tip
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
Grip panel at palm
This part at the inside of the knees gives you extra grip for ultimate control in the corners. It also protects the leather from wear and tear.
Outside stitching
The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.
Pull tab
Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
Regular cuff
ARAI XD-5 HELMET - MOJAVE SAGE
The XD-5 is a completely redesigned helmet, packed with many new features. As with everything from Arai, every improvement is made with a priority for protection. And this new model brings us ever closer to the ideal Arai shape for protection.
One of the biggest changes is the visor system and its visor. The new VAS-A visor system, derived from the VAS-V system originally developed for the Corsair-X, has been designed to maximize Glancing-Off performance, meaning more surface area to glance off impact energy whilst offering easy installation and removal of the visor and peak. The visor itself has been redesigned for increased visibility and Glancing-Off performance, and is now a Max Vision visor, so a Pinlock insert can easily be installed. The new VAS-A visor system also makes it easier to switch, without tools, to one of the other styles. You can choose between Adventure, Off-road and On-road.
Would you like to see how to change your XD-5 Shield, change your cheek pads, change out your chin strap cover, other details of your XD-5? For all of our "How To" videos on the XD-5, please click this link to find all of our informational videos for the XD-5.
XD-5 FIT
Arai is the only company offering multiple interior-fit shapes to better address the infinite variety of riders’ head shapes and sizes.
No one pays more attention to the subtle variations and infinite possibilities of the human head shape than Arai. Why? Because it’s the secret to getting the best comfort and fit.
So for more than three decades, Arai has pioneered different shapes – and even different proportions within those shapes – in our various helmet models, working to offer a better fit for more people.
The XD-5 has Arai's INTERMEDIATE OVAL (IO) interior fit shape.
The all-new peak is designed for more effective ventilation, increased high speed flow-through performance, greater range of adjustability for blocking the sun, and is more resistant to buffeting, all of which leads to an overall more comfortable riding experience.
The XD-5 offers three distinct configurations depending on rider preference or riding conditions. Change the look every time you ride, or even during the same ride.
The XD-5 has the option to use just the shield for street use, just the peak (with a set of your favorite goggles) for off-road use, and the shield and peak combined to create a truly multi-functional ADV helmet.
The new VAS-A Max Vision system allows for easier and faster shield swaps. The shield can be attached or removed without the need for any tools. The peak utilizes only one screw on each side for removal/installation.
The amount of energy that any helmet can absorb is limited and we believe in a crash the only option is to have the helmet glance in a way that directs the impact energy away from the inside of the helmet. The shell of the XD-5 is designed to be round, smooth, and strong so that it can more easily ‘glance off’ impact energy in an actual crash.
The opening area for the XD-5 mouth-shutter is double the size compared to the XD-4. Thanks to the evolution in shell strength from the previous generation, the aperture could be made larger, and the mouth shutter could be made to flow more fresh air without the need for the mesh vents as seen on its predecessors.
Working in conjunction with the mouth shutter, the inner shutter allows you to adjust the amount of airflow entering the helmet. If the inner and outer shutters are both open, the air will be directed towards your mouth. If the outer shutter is open and the inner closed, the air will be directed towards the shield and help to reduce fogging.
The effectiveness of conventional forehead vents could be limited by the rider's position, but with the front logo duct, airflow is unaffected by changes in riding position. Thanks to advances in shell technology, we can add holes in the forehead area for this vent without compromising the helmet's ability to protect.
Set in a position that makes it ideal for adventure riding, the AR spoiler contributes to reducing fatigue from turbulent air throughout long rides and works to draw out hot air from the crown area.
The new max-vision shield preserves the wide field-of-view and high level of visibility expected of an XD model. The Pinlock insert for this model has advanced to be effective at resisting fogging, even in extreme conditions, across the entire field of view.
*The Pinlock insert is an optional accessory, with one included in the box upon helmet purchase.
The XD-5 utilizes an interior liner that has the same level of acidity as bare skin and has odor-resistant and stain-resistant properties. The headliner is equipped with a removable foam layer on both the left and right sides for temples and a removable foam layer in the rear of the head-liner, allowing you to remove 5mm of foam if desired for exceptional micro-fitting adjustability.
*Once micro-fit pads are removed they cannot be replaced.
The retractable pull-down spoiler reduces wind intrusion into the bottom of the helmet and helps to pull out hot and humid exhaled air around the sculpted leading edges of the cheek pads. This coordinated ventilation, combined with fresh intake from the chin vent, also helps to reduce shield fogging.
*Optional ES Chin Cover can be used, but not included.
The Hyper-Ridge® has been re-sculpted to provide a flat surface on the sides to allow for the easy installation of a wide range of communication devices. This increases the bonding surface between the device and the helmet and helps to reduce buffeting or possible slip-offs.
Speakers can be installed directly to the provided hook & loop panel without the need to remove the cheek pad covers. Both ear pockets are deep and wide, designed to accommodate thicker speakers with plenty of room to position them to increase comfort.
A pocket to tuck away excess wiring and connectors as well as holes to easily run wires from side to side, have been incorporated into the neck roll to prevent wires coming loose while putting on or taking off the helmet. These features provide a smart way to tackle cable management inside your helmet.
ARAI XD-5 HELMET - BLACK FROST
The XD-5 is a completely redesigned helmet, packed with many new features. As with everything from Arai, every improvement is made with a priority for protection. And this new model brings us ever closer to the ideal Arai shape for protection.
One of the biggest changes is the visor system and its visor. The new VAS-A visor system, derived from the VAS-V system originally developed for the Corsair-X, has been designed to maximize Glancing-Off performance, meaning more surface area to glance off impact energy whilst offering easy installation and removal of the visor and peak. The visor itself has been redesigned for increased visibility and Glancing-Off performance, and is now a Max Vision visor, so a Pinlock insert can easily be installed. The new VAS-A visor system also makes it easier to switch, without tools, to one of the other styles. You can choose between Adventure, Off-road and On-road.
Would you like to see how to change your XD-5 Shield, change your cheek pads, change out your chin strap cover, other details of your XD-5? For all of our "How To" videos on the XD-5, please click this link to find all of our informational videos for the XD-5.
XD-5 FIT
Arai is the only company offering multiple interior-fit shapes to better address the infinite variety of riders’ head shapes and sizes.
No one pays more attention to the subtle variations and infinite possibilities of the human head shape than Arai. Why? Because it’s the secret to getting the best comfort and fit.
So for more than three decades, Arai has pioneered different shapes – and even different proportions within those shapes – in our various helmet models, working to offer a better fit for more people.
The XD-5 has Arai's INTERMEDIATE OVAL (IO) interior fit shape.
The all-new peak is designed for more effective ventilation, increased high speed flow-through performance, greater range of adjustability for blocking the sun, and is more resistant to buffeting, all of which leads to an overall more comfortable riding experience.
The XD-5 offers three distinct configurations depending on rider preference or riding conditions. Change the look every time you ride, or even during the same ride.
The XD-5 has the option to use just the shield for street use, just the peak (with a set of your favorite goggles) for off-road use, and the shield and peak combined to create a truly multi-functional ADV helmet.
The new VAS-A Max Vision system allows for easier and faster shield swaps. The shield can be attached or removed without the need for any tools. The peak utilizes only one screw on each side for removal/installation.
The amount of energy that any helmet can absorb is limited and we believe in a crash the only option is to have the helmet glance in a way that directs the impact energy away from the inside of the helmet. The shell of the XD-5 is designed to be round, smooth, and strong so that it can more easily ‘glance off’ impact energy in an actual crash.
The opening area for the XD-5 mouth-shutter is double the size compared to the XD-4. Thanks to the evolution in shell strength from the previous generation, the aperture could be made larger, and the mouth shutter could be made to flow more fresh air without the need for the mesh vents as seen on its predecessors.
Working in conjunction with the mouth shutter, the inner shutter allows you to adjust the amount of airflow entering the helmet. If the inner and outer shutters are both open, the air will be directed towards your mouth. If the outer shutter is open and the inner closed, the air will be directed towards the shield and help to reduce fogging.
The effectiveness of conventional forehead vents could be limited by the rider's position, but with the front logo duct, airflow is unaffected by changes in riding position. Thanks to advances in shell technology, we can add holes in the forehead area for this vent without compromising the helmet's ability to protect.
Set in a position that makes it ideal for adventure riding, the AR spoiler contributes to reducing fatigue from turbulent air throughout long rides and works to draw out hot air from the crown area.
The new max-vision shield preserves the wide field-of-view and high level of visibility expected of an XD model. The Pinlock insert for this model has advanced to be effective at resisting fogging, even in extreme conditions, across the entire field of view.
*The Pinlock insert is an optional accessory, with one included in the box upon helmet purchase.
The XD-5 utilizes an interior liner that has the same level of acidity as bare skin and has odor-resistant and stain-resistant properties. The headliner is equipped with a removable foam layer on both the left and right sides for temples and a removable foam layer in the rear of the head-liner, allowing you to remove 5mm of foam if desired for exceptional micro-fitting adjustability.
*Once micro-fit pads are removed they cannot be replaced.
The retractable pull-down spoiler reduces wind intrusion into the bottom of the helmet and helps to pull out hot and humid exhaled air around the sculpted leading edges of the cheek pads. This coordinated ventilation, combined with fresh intake from the chin vent, also helps to reduce shield fogging.
*Optional ES Chin Cover can be used, but not included.
The Hyper-Ridge® has been re-sculpted to provide a flat surface on the sides to allow for the easy installation of a wide range of communication devices. This increases the bonding surface between the device and the helmet and helps to reduce buffeting or possible slip-offs.
Speakers can be installed directly to the provided hook & loop panel without the need to remove the cheek pad covers. Both ear pockets are deep and wide, designed to accommodate thicker speakers with plenty of room to position them to increase comfort.
A pocket to tuck away excess wiring and connectors as well as holes to easily run wires from side to side, have been incorporated into the neck roll to prevent wires coming loose while putting on or taking off the helmet. These features provide a smart way to tackle cable management inside your helmet.
ARAI CONTOUR-X HELMET - DIAMOND WHITE
New for 2023, the Contour-X is designed for the modern motorcycle rider and aimed at a brand-new generation of riders who desire dynamic race-derived performance and all-day comfort on the road.
Extensive work by the R&D team in the lab, on the road, and out on the racetrack, with the ever-present goal of creating a full-featured, exceptional new Arai helmet, the Contour-X comes with unmatched performance, but with room for a stylish new look that provides a high level of comfort and protection over thousands of miles.
CONTOUR-X FIT
Arai is the only company offering multiple interior-fit shapes to better address the infinite variety of riders’ head shapes and sizes.
No one pays more attention to the subtle variations and infinite possibilities of the human head shape than Arai. Why? Because it’s the secret to getting the best comfort and fit.
So for more than three decades, Arai has pioneered different shapes – and even different proportions within those shapes – in our various helmet models, working to offer a better fit for more people.
The Contour-X has Arai's INTERMEDIATE OVAL (IO) interior fit shape.*
*A Helmet needs to be tried on in order to determine a proper fit.
The Contour-X has the new VAS mechanism with a variable axis incorporating a moving pivot point. By combining the pin trajectory, which is based on an imaginary axis, with the two trajectories of the double pivot point slot, the shield opens and closes smoothly even with the much lower shield mount position.
A dual-function lever releases both the side cover/pod and shield pin for quick and simple shield removal. Being able to see the shield mechanism allows for easier shield changes.
Immediately noticeable, the new 3D Arai logo duct (made as thin as possible, just 3.5mm in depth) feeds two central 10mm intake ports. This is a first in an Arai, and entirely due to PB-cLc2’s strength and the shell construction.
It also works very well at low speed and with an upright riding position; at just 31mph it’s channelling an extra 40% airflow, at 74.5mph, 7%. It can also be opened, or closed, quickly with summer or winter gloves, via a short-stroke lever placed at the top; if the rider can’t see the lever and the logo is in its normal place, the duct is open. The Arai logo duct is designed to break away in the event of an impact.
The one-piece aerodynamic rear exhaust/spoiler, operated by a 3-way switch, is inspired by the DF-X2 of the Corsair-X, but redesigned for touring use – however, it was tested up to 300km/h at Suzuka. It sits a little more forward on the shell and is fed by 3 ports in the shell. As part of Contour-X’s comprehensive ventilation system it efficiently draws air but also smooths airflow over (and from the side) of the helmet, improving stability and reducing buffeting, especially while overtaking at highway speeds. The result is much less rider fatigue. Manufactured as thin and light as possible it’s designed to crush or break away upon impact, therefore having no influence on protective performance.
Also new is the 3-position (open, midway, and closed) sliding air-scoop chin vent which flows a larger intake volume of air and has a replaceable filter. The actuating mechanism is thicker and easy to use with gloves.
Designed to fit and connect a communication system easily on the shell exterior – and without any compromise to the protection offered by the inner EPS liner.
The Contour-X outer shell design outlines a stylish, organic shape and uses PB-cLc2 for lightweight strength. The AR-mat has been substituted with a new material which makes it possible to reduce the weight, while maintaining strength. An extra layer of Super Fiber belting maintains rigidity in a crucial area while offering fl at sides for easy fi tment of an intercom system.
The exclusive shell fl ares 5mm around the opening, making it easier to get the helmet on and off (for newcomers to Arai the initial ‘snugness’ when putting the helmet on or taking it off can be challenging).
A small stitched opening on the inside of the neck roll allows the intercom system installer to easily tuck away any excess wiring that may be left-over after installing the speakers. For a nice, clean final look and ride.
ARAI REGENT-X HELMET - BLACK FROST
The all-new Arai Regent-X is designed to isolate you from distractions with the kind of comfort only Arai can deliver. Built with the same protection as our flagship Corsair-X model, the Regent-X features a new interior for both comfort and ease of taking it on and off.
REGENT-X FIT
Arai is the only company offering multiple interior-fit shapes to better address the infinite variety of riders’ head shapes and sizes.
No one pays more attention to the subtle variations and infinite possibilities of the human head shape than Arai. Why? Because it’s the secret to getting the best comfort and fit.
So for more than three decades, Arai has pioneered different shapes – and even different proportions within those shapes – in our various helmet models, working to offer a better fit for more people.
The Regent-X has Arai's INTERMEDIATE OVAL (IO) interior fit shape.
The Variable Axis System shield mechanism was developed to enhance the shape of the shell, but the easy to learn changing mechanism is what most people are raving about. Quick, easy and intuitive.
The VAS latch captures and securely holds the shield closed to help prevent unexpected opening. In addition to the de-mist function, the larger latch allows for intuitive and seamless shield operation.
The VAS pivot cover is now smaller and lower than the previous design, yielding an average of 24mm more area above the cover. The shell is now smoother along the Snell test line in the temple area, thus increasing the helmet’s ability to glance off objects during an impact.
Compared with the shell of the Corsair-V, the smooth area around the temple is increased by an average of 24mm on the new VAS model. Having a rounder, smoother, stronger shell to improve glance off ability.
Born from Arai’s exclusive Formula One helmet technology, the Peripherally Belted Complex Laminate Construction shell is developed to be both light and strong. The upper edge of the eye port is reinforced with Arai’s Peripheral Belt, custom woven in-house with proprietary super fibers to increase shell strength without adding thickness or weight.
A one-piece multi-density liner, tuned with varying densities according to the position and volume of each given area within each shell size, provides protection where it’s needed most, and allows Arai to make a compact helmet that puts protection first, and is as aerodynamic and light as possible.
The top padding stays in place but the liner is fixed with Velcro and easily removed for cleaning.
Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.
The exclusive shell flares 5mm around the base, making it easier to get the helmet on and off (for newcomers to Arai the initial ‘snugness’ when putting the helmet on or taking it off can be challenging).
Extracts more hot air from the helmets interior and improves aerodynamics.
Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance.
To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet.
Attached to the bottom of the helmet, the new chin curtain helps to further accentuate the Egg-shape form. The curtain simultaneously blocks air intrusion from turbulent air below and increases negative pressure to enhance the exhaust function of FFS by drawing more air from the mouth area. The improved airflow reduces noise even further.
To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure.
The Regent-X, along with all Arai models available in North America, meets or exceeds the SNELL M2020 standard, but only after they all first satisfy Arai's stringent in-house criteria.
ARAI REGENT-X HELMET - MODERN GRAY
The all-new Arai Regent-X is designed to isolate you from distractions with the kind of comfort only Arai can deliver. Built with the same protection as our flagship Corsair-X model, the Regent-X features a new interior for both comfort and ease of taking it on and off.
REGENT-X FIT
Arai is the only company offering multiple interior-fit shapes to better address the infinite variety of riders’ head shapes and sizes.
No one pays more attention to the subtle variations and infinite possibilities of the human head shape than Arai. Why? Because it’s the secret to getting the best comfort and fit.
So for more than three decades, Arai has pioneered different shapes – and even different proportions within those shapes – in our various helmet models, working to offer a better fit for more people.
The Regent-X has Arai's INTERMEDIATE OVAL (IO) interior fit shape.
The Variable Axis System shield mechanism was developed to enhance the shape of the shell, but the easy to learn changing mechanism is what most people are raving about. Quick, easy and intuitive.
The VAS latch captures and securely holds the shield closed to help prevent unexpected opening. In addition to the de-mist function, the larger latch allows for intuitive and seamless shield operation.
The VAS pivot cover is now smaller and lower than the previous design, yielding an average of 24mm more area above the cover. The shell is now smoother along the Snell test line in the temple area, thus increasing the helmet’s ability to glance off objects during an impact.
Compared with the shell of the Corsair-V, the smooth area around the temple is increased by an average of 24mm on the new VAS model. Having a rounder, smoother, stronger shell to improve glance off ability.
Born from Arai’s exclusive Formula One helmet technology, the Peripherally Belted Complex Laminate Construction shell is developed to be both light and strong. The upper edge of the eye port is reinforced with Arai’s Peripheral Belt, custom woven in-house with proprietary super fibers to increase shell strength without adding thickness or weight.
A one-piece multi-density liner, tuned with varying densities according to the position and volume of each given area within each shell size, provides protection where it’s needed most, and allows Arai to make a compact helmet that puts protection first, and is as aerodynamic and light as possible.
The top padding stays in place but the liner is fixed with Velcro and easily removed for cleaning.
Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.
The exclusive shell flares 5mm around the base, making it easier to get the helmet on and off (for newcomers to Arai the initial ‘snugness’ when putting the helmet on or taking it off can be challenging).
Extracts more hot air from the helmets interior and improves aerodynamics.
Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance.
To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet.
Attached to the bottom of the helmet, the new chin curtain helps to further accentuate the Egg-shape form. The curtain simultaneously blocks air intrusion from turbulent air below and increases negative pressure to enhance the exhaust function of FFS by drawing more air from the mouth area. The improved airflow reduces noise even further.
To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure.
The Regent-X, along with all Arai models available in North America, meets or exceeds the SNELL M2020 standard, but only after they all first satisfy Arai's stringent in-house criteria.
NEXX X.WED3 ADV HELMET - MT FOREST GREEN
TRIED & TESTED UNDER THE WORLD’S MOST EXTREME CONDITIONS
No compromises – this was the motto to develop the new NEXX X.WED3 – to achieve a modern design, flawless fit, durability, exceptional functionality and technical innovation.
Tested to the extreme having done around 200,000 km and more than 60 adventure riders testing in the most remote locations in the world, from Alaska, Croatia, Baja California, Ha Giang to Merzouga desert in Morocco – all to ensure that every small detail is perfectly designed for any adventure.
EQUIPPED FOR EPIC ADVENTURES, ON ROAD AND OFF ROAD
The new X.WED3 provides a seamless transition between an off-road/adventure helmet and street riding as a full-face helmet, without requiring any tools. Additionally, it offers the flexibility to use goggles in dusty environments, enhancing its versatility.
CONTEMPORARY MASTERY
NEXX’s X-Matrix 2 formula combines advanced multi-direction lay-up and first quality composite materials through six different layers that ensure optimized impact and penetration performance for speed events. This enables us to create an ultralight shell that is tougher, stiffer, and stronger but most importantly: provides impressive high-energy impact management, for world class protection.
Available in three different shell sizes.
THE PERFECT VENTILATION, IN ALL CONDITIONS
Featuring seven (7) closable air intakes and four (4) exhaust outlets the complex X.WED3’s ventilation system is ready to adapt to all preferences and weather conditions.
Innovation has been the prime focus of the X.WED3 with the new Mid Airflow Chamber. This new patent pending system is created to keep a gap storage all around between the inner EPS and the outer EPS, providing immediate circulation of fresh air around the head while exiting the hot air from the shell through the rear outlets.
VISOR RECOIL SYSTEM
The new visor design includes NEXX’s proven Recoil Visor System with its spring-loaded base side plates that auto-adjust and pull the visor back against the dual-lip window beading for a perfect airtight seal – working independently from the peak fitting system.
Pinlock 120 XLT Max Vision (in X-PRO Carbon fiber models) and Pinlock 70 (in X-Matrix 2 fiber models) are included in the box.
X.WED3 inner sun visor is 18% bigger, with enough height to cover until just above the nose bridge.
Combining sleek and stable aerodynamics, the strategic peak design ensures both airstreams to pass through and improved performance at higher speeds. The peak’s 3-level adjustment and removal are easy-to-operate through the new anti-rotation mounting screws, made in a fusion of metal and plastic by injection molding. A screwless peak extensor is still included, perfect for riding in low sun.
ANTI-VIBRATION EPS SYSTEM
The new anti-vibration EPS system includes a special rubber trim settled between inner EPS and Outer EPS, allowing micromovements from the inner EPS that is in contact with the user’s head. This helps to reduce the vibrations in the helmet caused by air turbulence at higher speeds. The result is a safer helmet, with extra stability in the head and a smoother and more comfortable sensation while riding.
ARRIVE REFRESHED
Contemporary comfort and carefully selected materials characterize every detail of the X.WED3’s interior. The combination of synthetic leather with large ventilation mesh panels and detailed stitching immediately catches the eye at the front and form a quality material mix for greater ventilation and best insulation.
In addition, the innovative Air combs offer unparalleled levels of interior ventilation and comfort. The X.WED3’s crown pad is sewn with a special alveolar mesh that creates a fresh air chamber between the EPS liner and the padding.
The interior fabrics are made from soft-touch X-Mart Dry fabrics that keep the interior cool and dry.
JOIN THE SAFE, FAST EMERGENCY AND CLEANING REVOLUTION
The new lining F.R.S (Fast Release System) is distinguished by the simplicity with which it allows to remove simultaneously both cheek pads in just a few simple steps and without any tools.
Easy to reach and even easier to operate – Patent pending F.R.S® is the perfect solution for interior cleaning but most importantly allowing rescue personnel to easily remove the helmet with minimum friction in an injured rider’s head, in case of an emergency.
EASY AND FAST
Simply lift the rubber trim arms that lock the buttons in both sides of the helmet, slide back the red buttons and both cheek pads are free to be fully removed.
SLEEK, LIGHTER AND SMARTER THAN EVER
Subtle yet packed with powerful capabilities, the new X-COM3 series can be fully integrated into the helmet, with built-in earphones, battery, cable slots, microphone, and Bluetooth 5.2 technology, available in two variants: the X-COM3 standard, a mid-range version with capable features and the X-COM3 PRO that brings 2.0 Mesh Technology alongside other extra features and world-class sound by Harman Kardon.
CAPTURE THE FUN
Designed to keep your action-camera securely and firmly in place during adventure riding, the new POV Kit includes a top camera mount, that can be used with and without the peak; a removable side mount and a 4-reversible position chin mount, to capture all the action up close!
INTEGRATED GOGGLE STRAP HOLDER
One of the unique features of the X.WED3 is the Goggle Strap holder integrated in the back of the helmet, allowing a better placement of off-road goggles which remain attached to the helmet when not in use.
X.WED 3 - X-MATRIX2 TECHNICAL SPECIFICATIONS
Check out the Nexx Helmet fitting guide here.
The circumference of the head should be measured with a cloth measuring tape at a point just above the eyebrows, around the ears, and at a point in the back of the head that results in the largest possible measurement. Take several measurements to make sure you have the largest one. Compare to the size chart below. If you are in between sizes, better to choose the larger size.
The cheek pads should be in contact with the cheeks with a snug fit but without excessive pressure. Look for gaps between the temples and the brow pad. After this, check movement of the helmet up and down and side to side. As you test the movement, the helmet padding should not slide easily over the skin, but rather, should pull the skin in the direction of rotation. A proper-fitting helmet will feel snug with fairly even pressure around the sides and top of your head.
NEXX X.WED3 ADV HELMET - MT BLACK
TRIED & TESTED UNDER THE WORLD’S MOST EXTREME CONDITIONS
No compromises – this was the motto to develop the new NEXX X.WED3 – to achieve a modern design, flawless fit, durability, exceptional functionality and technical innovation.
Tested to the extreme having done around 200,000 km and more than 60 adventure riders testing in the most remote locations in the world, from Alaska, Croatia, Baja California, Ha Giang to Merzouga desert in Morocco – all to ensure that every small detail is perfectly designed for any adventure.
EQUIPPED FOR EPIC ADVENTURES, ON ROAD AND OFF ROAD
The new X.WED3 provides a seamless transition between an off-road/adventure helmet and street riding as a full-face helmet, without requiring any tools. Additionally, it offers the flexibility to use goggles in dusty environments, enhancing its versatility.
CONTEMPORARY MASTERY
NEXX’s X-Matrix 2 formula combines advanced multi-direction lay-up and first quality composite materials through six different layers that ensure optimized impact and penetration performance for speed events. This enables us to create an ultralight shell that is tougher, stiffer, and stronger but most importantly: provides impressive high-energy impact management, for world class protection.
Available in three different shell sizes.
THE PERFECT VENTILATION, IN ALL CONDITIONS
Featuring seven (7) closable air intakes and four (4) exhaust outlets the complex X.WED3’s ventilation system is ready to adapt to all preferences and weather conditions.
Innovation has been the prime focus of the X.WED3 with the new Mid Airflow Chamber. This new patent pending system is created to keep a gap storage all around between the inner EPS and the outer EPS, providing immediate circulation of fresh air around the head while exiting the hot air from the shell through the rear outlets.
VISOR RECOIL SYSTEM
The new visor design includes NEXX’s proven Recoil Visor System with its spring-loaded base side plates that auto-adjust and pull the visor back against the dual-lip window beading for a perfect airtight seal – working independently from the peak fitting system.
Pinlock 120 XLT Max Vision (in X-PRO Carbon fiber models) and Pinlock 70 (in X-Matrix 2 fiber models) are included in the box.
X.WED3 inner sun visor is 18% bigger, with enough height to cover until just above the nose bridge.
Combining sleek and stable aerodynamics, the strategic peak design ensures both airstreams to pass through and improved performance at higher speeds. The peak’s 3-level adjustment and removal are easy-to-operate through the new anti-rotation mounting screws, made in a fusion of metal and plastic by injection molding. A screwless peak extensor is still included, perfect for riding in low sun.
ANTI-VIBRATION EPS SYSTEM
The new anti-vibration EPS system includes a special rubber trim settled between inner EPS and Outer EPS, allowing micromovements from the inner EPS that is in contact with the user’s head. This helps to reduce the vibrations in the helmet caused by air turbulence at higher speeds. The result is a safer helmet, with extra stability in the head and a smoother and more comfortable sensation while riding.
ARRIVE REFRESHED
Contemporary comfort and carefully selected materials characterize every detail of the X.WED3’s interior. The combination of synthetic leather with large ventilation mesh panels and detailed stitching immediately catches the eye at the front and form a quality material mix for greater ventilation and best insulation.
In addition, the innovative Air combs offer unparalleled levels of interior ventilation and comfort. The X.WED3’s crown pad is sewn with a special alveolar mesh that creates a fresh air chamber between the EPS liner and the padding.
The interior fabrics are made from soft-touch X-Mart Dry fabrics that keep the interior cool and dry.
JOIN THE SAFE, FAST EMERGENCY AND CLEANING REVOLUTION
The new lining F.R.S (Fast Release System) is distinguished by the simplicity with which it allows to remove simultaneously both cheek pads in just a few simple steps and without any tools.
Easy to reach and even easier to operate – Patent pending F.R.S® is the perfect solution for interior cleaning but most importantly allowing rescue personnel to easily remove the helmet with minimum friction in an injured rider’s head, in case of an emergency.
EASY AND FAST
Simply lift the rubber trim arms that lock the buttons in both sides of the helmet, slide back the red buttons and both cheek pads are free to be fully removed.
SLEEK, LIGHTER AND SMARTER THAN EVER
Subtle yet packed with powerful capabilities, the new X-COM3 series can be fully integrated into the helmet, with built-in earphones, battery, cable slots, microphone, and Bluetooth 5.2 technology, available in two variants: the X-COM3 standard, a mid-range version with capable features and the X-COM3 PRO that brings 2.0 Mesh Technology alongside other extra features and world-class sound by Harman Kardon.
CAPTURE THE FUN
Designed to keep your action-camera securely and firmly in place during adventure riding, the new POV Kit includes a top camera mount, that can be used with and without the peak; a removable side mount and a 4-reversible position chin mount, to capture all the action up close!
INTEGRATED GOGGLE STRAP HOLDER
One of the unique features of the X.WED3 is the Goggle Strap holder integrated in the back of the helmet, allowing a better placement of off-road goggles which remain attached to the helmet when not in use.
X.WED 3 - X-MATRIX2 TECHNICAL SPECIFICATIONS
Check out the Nexx Helmet fitting guide here.
The circumference of the head should be measured with a cloth measuring tape at a point just above the eyebrows, around the ears, and at a point in the back of the head that results in the largest possible measurement. Take several measurements to make sure you have the largest one. Compare to the size chart below. If you are in between sizes, better to choose the larger size.
The cheek pads should be in contact with the cheeks with a snug fit but without excessive pressure. Look for gaps between the temples and the brow pad. After this, check movement of the helmet up and down and side to side. As you test the movement, the helmet padding should not slide easily over the skin, but rather, should pull the skin in the direction of rotation. A proper-fitting helmet will feel snug with fairly even pressure around the sides and top of your head.
NEXX X.WED3 ADV HELMET - PEARL WHITE
TRIED & TESTED UNDER THE WORLD’S MOST EXTREME CONDITIONS
No compromises – this was the motto to develop the new NEXX X.WED3 – to achieve a modern design, flawless fit, durability, exceptional functionality and technical innovation.
Tested to the extreme having done around 200,000 km and more than 60 adventure riders testing in the most remote locations in the world, from Alaska, Croatia, Baja California, Ha Giang to Merzouga desert in Morocco – all to ensure that every small detail is perfectly designed for any adventure.
EQUIPPED FOR EPIC ADVENTURES, ON ROAD AND OFF ROAD
The new X.WED3 provides a seamless transition between an off-road/adventure helmet and street riding as a full-face helmet, without requiring any tools. Additionally, it offers the flexibility to use goggles in dusty environments, enhancing its versatility.
CONTEMPORARY MASTERY
NEXX’s X-Matrix 2 formula combines advanced multi-direction lay-up and first quality composite materials through six different layers that ensure optimized impact and penetration performance for speed events. This enables us to create an ultralight shell that is tougher, stiffer, and stronger but most importantly: provides impressive high-energy impact management, for world class protection.
Available in three different shell sizes.
THE PERFECT VENTILATION, IN ALL CONDITIONS
Featuring seven (7) closable air intakes and four (4) exhaust outlets the complex X.WED3’s ventilation system is ready to adapt to all preferences and weather conditions.
Innovation has been the prime focus of the X.WED3 with the new Mid Airflow Chamber. This new patent pending system is created to keep a gap storage all around between the inner EPS and the outer EPS, providing immediate circulation of fresh air around the head while exiting the hot air from the shell through the rear outlets.
VISOR RECOIL SYSTEM
The new visor design includes NEXX’s proven Recoil Visor System with its spring-loaded base side plates that auto-adjust and pull the visor back against the dual-lip window beading for a perfect airtight seal – working independently from the peak fitting system.
Pinlock 120 XLT Max Vision (in X-PRO Carbon fiber models) and Pinlock 70 (in X-Matrix 2 fiber models) are included in the box.
X.WED3 inner sun visor is 18% bigger, with enough height to cover until just above the nose bridge.
Combining sleek and stable aerodynamics, the strategic peak design ensures both airstreams to pass through and improved performance at higher speeds. The peak’s 3-level adjustment and removal are easy-to-operate through the new anti-rotation mounting screws, made in a fusion of metal and plastic by injection molding. A screwless peak extensor is still included, perfect for riding in low sun.
ANTI-VIBRATION EPS SYSTEM
The new anti-vibration EPS system includes a special rubber trim settled between inner EPS and Outer EPS, allowing micromovements from the inner EPS that is in contact with the user’s head. This helps to reduce the vibrations in the helmet caused by air turbulence at higher speeds. The result is a safer helmet, with extra stability in the head and a smoother and more comfortable sensation while riding.
ARRIVE REFRESHED
Contemporary comfort and carefully selected materials characterize every detail of the X.WED3’s interior. The combination of synthetic leather with large ventilation mesh panels and detailed stitching immediately catches the eye at the front and form a quality material mix for greater ventilation and best insulation.
In addition, the innovative Air combs offer unparalleled levels of interior ventilation and comfort. The X.WED3’s crown pad is sewn with a special alveolar mesh that creates a fresh air chamber between the EPS liner and the padding.
The interior fabrics are made from soft-touch X-Mart Dry fabrics that keep the interior cool and dry.
JOIN THE SAFE, FAST EMERGENCY AND CLEANING REVOLUTION
The new lining F.R.S (Fast Release System) is distinguished by the simplicity with which it allows to remove simultaneously both cheek pads in just a few simple steps and without any tools.
Easy to reach and even easier to operate – Patent pending F.R.S® is the perfect solution for interior cleaning but most importantly allowing rescue personnel to easily remove the helmet with minimum friction in an injured rider’s head, in case of an emergency.
EASY AND FAST
Simply lift the rubber trim arms that lock the buttons in both sides of the helmet, slide back the red buttons and both cheek pads are free to be fully removed.
SLEEK, LIGHTER AND SMARTER THAN EVER
Subtle yet packed with powerful capabilities, the new X-COM3 series can be fully integrated into the helmet, with built-in earphones, battery, cable slots, microphone, and Bluetooth 5.2 technology, available in two variants: the X-COM3 standard, a mid-range version with capable features and the X-COM3 PRO that brings 2.0 Mesh Technology alongside other extra features and world-class sound by Harman Kardon.
CAPTURE THE FUN
Designed to keep your action-camera securely and firmly in place during adventure riding, the new POV Kit includes a top camera mount, that can be used with and without the peak; a removable side mount and a 4-reversible position chin mount, to capture all the action up close!
INTEGRATED GOGGLE STRAP HOLDER
One of the unique features of the X.WED3 is the Goggle Strap holder integrated in the back of the helmet, allowing a better placement of off-road goggles which remain attached to the helmet when not in use.
X.WED 3 - X-MATRIX2 TECHNICAL SPECIFICATIONS
Check out the Nexx Helmet fitting guide here.
The circumference of the head should be measured with a cloth measuring tape at a point just above the eyebrows, around the ears, and at a point in the back of the head that results in the largest possible measurement. Take several measurements to make sure you have the largest one. Compare to the size chart below. If you are in between sizes, better to choose the larger size.
The cheek pads should be in contact with the cheeks with a snug fit but without excessive pressure. Look for gaps between the temples and the brow pad. After this, check movement of the helmet up and down and side to side. As you test the movement, the helmet padding should not slide easily over the skin, but rather, should pull the skin in the direction of rotation. A proper-fitting helmet will feel snug with fairly even pressure around the sides and top of your head.
NEXX X.WED3 ADV HELMET - TRAILMANIA - MT LIGHT SAND
TRIED & TESTED UNDER THE WORLD’S MOST EXTREME CONDITIONS
No compromises – this was the motto to develop the new NEXX X.WED3 – to achieve a modern design, flawless fit, durability, exceptional functionality and technical innovation.
Tested to the extreme having done around 200,000 km and more than 60 adventure riders testing in the most remote locations in the world, from Alaska, Croatia, Baja California, Ha Giang to Merzouga desert in Morocco – all to ensure that every small detail is perfectly designed for any adventure.
EQUIPPED FOR EPIC ADVENTURES, ON ROAD AND OFF ROAD
The new X.WED3 provides a seamless transition between an off-road/adventure helmet and street riding as a full-face helmet, without requiring any tools. Additionally, it offers the flexibility to use goggles in dusty environments, enhancing its versatility.
CONTEMPORARY MASTERY
NEXX’s X-Matrix 2 formula combines advanced multi-direction lay-up and first quality composite materials through six different layers that ensure optimized impact and penetration performance for speed events. This enables us to create an ultralight shell that is tougher, stiffer, and stronger but most importantly: provides impressive high-energy impact management, for world class protection.
Available in three different shell sizes.
THE PERFECT VENTILATION, IN ALL CONDITIONS
Featuring seven (7) closable air intakes and four (4) exhaust outlets the complex X.WED3’s ventilation system is ready to adapt to all preferences and weather conditions.
Innovation has been the prime focus of the X.WED3 with the new Mid Airflow Chamber. This new patent pending system is created to keep a gap storage all around between the inner EPS and the outer EPS, providing immediate circulation of fresh air around the head while exiting the hot air from the shell through the rear outlets.
VISOR RECOIL SYSTEM
The new visor design includes NEXX’s proven Recoil Visor System with its spring-loaded base side plates that auto-adjust and pull the visor back against the dual-lip window beading for a perfect airtight seal – working independently from the peak fitting system.
Pinlock 120 XLT Max Vision (in X-PRO Carbon fiber models) and Pinlock 70 (in X-Matrix 2 fiber models) are included in the box.
X.WED3 inner sun visor is 18% bigger, with enough height to cover until just above the nose bridge.
Combining sleek and stable aerodynamics, the strategic peak design ensures both airstreams to pass through and improved performance at higher speeds. The peak’s 3-level adjustment and removal are easy-to-operate through the new anti-rotation mounting screws, made in a fusion of metal and plastic by injection molding. A screwless peak extensor is still included, perfect for riding in low sun.
ANTI-VIBRATION EPS SYSTEM
The new anti-vibration EPS system includes a special rubber trim settled between inner EPS and Outer EPS, allowing micromovements from the inner EPS that is in contact with the user’s head. This helps to reduce the vibrations in the helmet caused by air turbulence at higher speeds. The result is a safer helmet, with extra stability in the head and a smoother and more comfortable sensation while riding.
ARRIVE REFRESHED
Contemporary comfort and carefully selected materials characterize every detail of the X.WED3’s interior. The combination of synthetic leather with large ventilation mesh panels and detailed stitching immediately catches the eye at the front and form a quality material mix for greater ventilation and best insulation.
In addition, the innovative Air combs offer unparalleled levels of interior ventilation and comfort. The X.WED3’s crown pad is sewn with a special alveolar mesh that creates a fresh air chamber between the EPS liner and the padding.
The interior fabrics are made from soft-touch X-Mart Dry fabrics that keep the interior cool and dry.
JOIN THE SAFE, FAST EMERGENCY AND CLEANING REVOLUTION
The new lining F.R.S (Fast Release System) is distinguished by the simplicity with which it allows to remove simultaneously both cheek pads in just a few simple steps and without any tools.
Easy to reach and even easier to operate – Patent pending F.R.S® is the perfect solution for interior cleaning but most importantly allowing rescue personnel to easily remove the helmet with minimum friction in an injured rider’s head, in case of an emergency.
EASY AND FAST
Simply lift the rubber trim arms that lock the buttons in both sides of the helmet, slide back the red buttons and both cheek pads are free to be fully removed.
SLEEK, LIGHTER AND SMARTER THAN EVER
Subtle yet packed with powerful capabilities, the new X-COM3 series can be fully integrated into the helmet, with built-in earphones, battery, cable slots, microphone, and Bluetooth 5.2 technology, available in two variants: the X-COM3 standard, a mid-range version with capable features and the X-COM3 PRO that brings 2.0 Mesh Technology alongside other extra features and world-class sound by Harman Kardon.
CAPTURE THE FUN
Designed to keep your action-camera securely and firmly in place during adventure riding, the new POV Kit includes a top camera mount, that can be used with and without the peak; a removable side mount and a 4-reversible position chin mount, to capture all the action up close!
INTEGRATED GOGGLE STRAP HOLDER
One of the unique features of the X.WED3 is the Goggle Strap holder integrated in the back of the helmet, allowing a better placement of off-road goggles which remain attached to the helmet when not in use.
X.WED 3 - X-MATRIX2 TECHNICAL SPECIFICATIONS
Check out the Nexx Helmet fitting guide here.
The circumference of the head should be measured with a cloth measuring tape at a point just above the eyebrows, around the ears, and at a point in the back of the head that results in the largest possible measurement. Take several measurements to make sure you have the largest one. Compare to the size chart below. If you are in between sizes, better to choose the larger size.
The cheek pads should be in contact with the cheeks with a snug fit but without excessive pressure. Look for gaps between the temples and the brow pad. After this, check movement of the helmet up and down and side to side. As you test the movement, the helmet padding should not slide easily over the skin, but rather, should pull the skin in the direction of rotation. A proper-fitting helmet will feel snug with fairly even pressure around the sides and top of your head.
NEXX X.WED3 ADV HELMET - WILD PRO CARBON - WILD BLUE
TRIED & TESTED UNDER THE WORLD’S MOST EXTREME CONDITIONS
No compromises – this was the motto to develop the new NEXX X.WED3 – to achieve a modern design, flawless fit, durability, exceptional functionality and technical innovation.
Tested to the extreme having done around 200,000 km and more than 60 adventure riders testing in the most remote locations in the world, from Alaska, Croatia, Baja California, Ha Giang to Merzouga desert in Morocco – all to ensure that every small detail is perfectly designed for any adventure.
EQUIPPED FOR EPIC ADVENTURES, ON ROAD AND OFF ROAD
The new X.WED3 provides a seamless transition between an off-road/adventure helmet and street riding as a full-face helmet, without requiring any tools. Additionally, it offers the flexibility to use goggles in dusty environments, enhancing its versatility.
CONTEMPORARY MASTERY
The X.WED3 Wild Pro’s shell is made in ultralight, highly impact-resistant X-PRO Carbon fiber, a next generation technology that uses aerospace knowledge together with 3K carbon to obtain a composite construction that makes the shell lighter, stronger, and even more comfortable – in 3 shell sizes.
An entry-level version in NEXX’s X-Matrix 2 special formula (multi-composite fiber) will be also available.
THE PERFECT VENTILATION, IN ALL CONDITIONS
Featuring seven (7) closable air intakes and four (4) exhaust outlets the complex X.WED3’s ventilation system is ready to adapt to all preferences and weather conditions.
Innovation has been the prime focus of the X.WED3 with the new Mid Airflow Chamber. This new patent pending system is created to keep a gap storage all around between the inner EPS and the outer EPS, providing immediate circulation of fresh air around the head while exiting the hot air from the shell through the rear outlets.
VISOR RECOIL SYSTEM
The new visor design includes NEXX’s proven Recoil Visor System with its spring-loaded base side plates that auto-adjust and pull the visor back against the dual-lip window beading for a perfect airtight seal – working independently from the peak fitting system.
Pinlock 120 XLT Max Vision (in X-PRO Carbon fiber models) and Pinlock 70 (in X-Matrix 2 fiber models) are included in the box.
X.WED3 inner sun visor is 18% bigger, with enough height to cover until just above the nose bridge.
Combining sleek and stable aerodynamics, the strategic peak design ensures both airstreams to pass through and improved performance at higher speeds. The peak’s 3-level adjustment and removal are easy-to-operate through the new anti-rotation mounting screws, made in a fusion of metal and plastic by injection molding. A screwless peak extensor is still included, perfect for riding in low sun.
ANTI-VIBRATION EPS SYSTEM
The new anti-vibration EPS system includes a special rubber trim settled between inner EPS and Outer EPS, allowing micromovements from the inner EPS that is in contact with the user’s head. This helps to reduce the vibrations in the helmet caused by air turbulence at higher speeds. The result is a safer helmet, with extra stability in the head and a smoother and more comfortable sensation while riding.
ARRIVE REFRESHED
Contemporary comfort and carefully selected materials characterize every detail of the X.WED3’s interior. The combination of synthetic leather with large ventilation mesh panels and detailed stitching immediately catches the eye at the front and form a quality material mix for greater ventilation and best insulation.
In addition, the innovative Air combs offer unparalleled levels of interior ventilation and comfort. The X.WED3’s crown pad is sewn with a special alveolar mesh that creates a fresh air chamber between the EPS liner and the padding.
The interior fabrics are made from soft-touch X-Mart Dry fabrics that keep the interior cool and dry.
JOIN THE SAFE, FAST EMERGENCY AND CLEANING REVOLUTION
The new lining F.R.S (Fast Release System) is distinguished by the simplicity with which it allows to remove simultaneously both cheek pads in just a few simple steps and without any tools.
Easy to reach and even easier to operate – Patent pending F.R.S® is the perfect solution for interior cleaning but most importantly allowing rescue personnel to easily remove the helmet with minimum friction in an injured rider’s head, in case of an emergency.
EASY AND FAST
Simply lift the rubber trim arms that lock the buttons in both sides of the helmet, slide back the red buttons and both cheek pads are free to be fully removed.
SLEEK, LIGHTER AND SMARTER THAN EVER
Subtle yet packed with powerful capabilities, the new X-COM3 series can be fully integrated into the helmet, with built-in earphones, battery, cable slots, microphone, and Bluetooth 5.2 technology, available in two variants: the X-COM3 standard, a mid-range version with capable features and the X-COM3 PRO that brings 2.0 Mesh Technology alongside other extra features and world-class sound by Harman Kardon.
CAPTURE THE FUN
Designed to keep your action-camera securely and firmly in place during adventure riding, the new POV Kit includes a top camera mount, that can be used with and without the peak; a removable side mount and a 4-reversible position chin mount, to capture all the action up close!
INTEGRATED GOGGLE STRAP HOLDER
One of the unique features of the X.WED3 is the Goggle Strap holder integrated in the back of the helmet, allowing a better placement of off-road goggles which remain attached to the helmet when not in use.
X.WED 3 - X-PRO CARBON TECHNICAL SPECIFICATIONS
Check out the Nexx Helmet fitting guide here.
The circumference of the head should be measured with a cloth measuring tape at a point just above the eyebrows, around the ears, and at a point in the back of the head that results in the largest possible measurement. Take several measurements to make sure you have the largest one. Compare to the size chart below. If you are in between sizes, better to choose the larger size.
The cheek pads should be in contact with the cheeks with a snug fit but without excessive pressure. Look for gaps between the temples and the brow pad. After this, check movement of the helmet up and down and side to side. As you test the movement, the helmet padding should not slide easily over the skin, but rather, should pull the skin in the direction of rotation. A proper-fitting helmet will feel snug with fairly even pressure around the sides and top of your head.
NEXX X.WED3 ADV HELMET - KEYO CARBON - MT GREEN / SILVER
TRIED & TESTED UNDER THE WORLD’S MOST EXTREME CONDITIONS
No compromises – this was the motto to develop the new NEXX X.WED3 – to achieve a modern design, flawless fit, durability, exceptional functionality and technical innovation.
Tested to the extreme having done around 200,000 km and more than 60 adventure riders testing in the most remote locations in the world, from Alaska, Croatia, Baja California, Ha Giang to Merzouga desert in Morocco – all to ensure that every small detail is perfectly designed for any adventure.
EQUIPPED FOR EPIC ADVENTURES, ON ROAD AND OFF ROAD
The new X.WED3 provides a seamless transition between an off-road/adventure helmet and street riding as a full-face helmet, without requiring any tools. Additionally, it offers the flexibility to use goggles in dusty environments, enhancing its versatility.
CONTEMPORARY MASTERY
The X.WED3 Keyo’s shell is made in ultralight, highly impact-resistant X-PRO Carbon fiber, a next generation technology that uses aerospace knowledge together with 3K carbon to obtain a composite construction that makes the shell lighter, stronger, and even more comfortable – in 3 shell sizes.
An entry-level version in NEXX’s X-Matrix 2 special formula (multi-composite fiber) will also be available.
THE PERFECT VENTILATION, IN ALL CONDITIONS
Featuring seven (7) closable air intakes and four (4) exhaust outlets the complex X.WED3’s ventilation system is ready to adapt to all preferences and weather conditions.
Innovation has been the prime focus of the X.WED3 with the new Mid Airflow Chamber. This new patent pending system is created to keep a gap storage all around between the inner EPS and the outer EPS, providing immediate circulation of fresh air around the head while exiting the hot air from the shell through the rear outlets.
VISOR RECOIL SYSTEM
The new visor design includes NEXX’s proven Recoil Visor System with its spring-loaded base side plates that auto-adjust and pull the visor back against the dual-lip window beading for a perfect airtight seal – working independently from the peak fitting system.
Pinlock 120 XLT Max Vision (in X-PRO Carbon fiber models) and Pinlock 70 (in X-Matrix 2 fiber models) are included in the box.
X.WED3 inner sun visor is 18% bigger, with enough height to cover until just above the nose bridge.
Combining sleek and stable aerodynamics, the strategic peak design ensures both airstreams to pass through and improved performance at higher speeds. The peak’s 3-level adjustment and removal are easy-to-operate through the new anti-rotation mounting screws, made in a fusion of metal and plastic by injection molding. A screwless peak extensor is still included, perfect for riding in low sun.
ANTI-VIBRATION EPS SYSTEM
The new anti-vibration EPS system includes a special rubber trim settled between inner EPS and Outer EPS, allowing micromovements from the inner EPS that is in contact with the user’s head. This helps to reduce the vibrations in the helmet caused by air turbulence at higher speeds. The result is a safer helmet, with extra stability in the head and a smoother and more comfortable sensation while riding.
ARRIVE REFRESHED
Contemporary comfort and carefully selected materials characterize every detail of the X.WED3’s interior. The combination of synthetic leather with large ventilation mesh panels and detailed stitching immediately catches the eye at the front and form a quality material mix for greater ventilation and best insulation.
In addition, the innovative Air combs offer unparalleled levels of interior ventilation and comfort. The X.WED3’s crown pad is sewn with a special alveolar mesh that creates a fresh air chamber between the EPS liner and the padding.
The interior fabrics are made from soft-touch X-Mart Dry fabrics that keep the interior cool and dry.
JOIN THE SAFE, FAST EMERGENCY AND CLEANING REVOLUTION
The new lining F.R.S (Fast Release System) is distinguished by the simplicity with which it allows to remove simultaneously both cheek pads in just a few simple steps and without any tools.
Easy to reach and even easier to operate – Patent pending F.R.S® is the perfect solution for interior cleaning but most importantly allowing rescue personnel to easily remove the helmet with minimum friction in an injured rider’s head, in case of an emergency.
EASY AND FAST
Simply lift the rubber trim arms that lock the buttons in both sides of the helmet, slide back the red buttons and both cheek pads are free to be fully removed.
SLEEK, LIGHTER AND SMARTER THAN EVER
Subtle yet packed with powerful capabilities, the new X-COM3 series can be fully integrated into the helmet, with built-in earphones, battery, cable slots, microphone, and Bluetooth 5.2 technology, available in two variants: the X-COM3 standard, a mid-range version with capable features and the X-COM3 PRO that brings 2.0 Mesh Technology alongside other extra features and world-class sound by Harman Kardon.
CAPTURE THE FUN
Designed to keep your action-camera securely and firmly in place during adventure riding, the new POV Kit includes a top camera mount, that can be used with and without the peak; a removable side mount and a 4-reversible position chin mount, to capture all the action up close!
INTEGRATED GOGGLE STRAP HOLDER
One of the unique features of the X.WED3 is the Goggle Strap holder integrated in the back of the helmet, allowing a better placement of off-road goggles which remain attached to the helmet when not in use.
X.WED 3 - X-PRO CARBON FIBRE TECHNICAL SPECIFICATIONS
Check out the Nexx Helmet fitting guide here.
The circumference of the head should be measured with a cloth measuring tape at a point just above the eyebrows, around the ears, and at a point in the back of the head that results in the largest possible measurement. Take several measurements to make sure you have the largest one. Compare to the size chart below. If you are in between sizes, better to choose the larger size.
The cheek pads should be in contact with the cheeks with a snug fit but without excessive pressure. Look for gaps between the temples and the brow pad. After this, check movement of the helmet up and down and side to side. As you test the movement, the helmet padding should not slide easily over the skin, but rather, should pull the skin in the direction of rotation. A proper-fitting helmet will feel snug with fairly even pressure around the sides and top of your head.
NEXX X.WST3 - MT BLACK
A JOURNEY OF WILD ENCOUNTERS IN THE STREETS
The X.WST 3 is a streetfighter helmet with one of the most dissident designs within the style. The sport character of the X.WST 3 along with NEXX’s hi-tech features makes it a safe and versatile choice for everyday use.
MODERN-DAY SAFETY
NEXX’s X-Matrix 2 formula combines advanced multi-direction lay-up and top quality composite materials through six different layers that ensure optimized impact and penetration performance for speed events. This enables us to create an ultralight shell that is tougher, stiffer, and stronger but most importantly, provides impressive high-energy impact management, for world-class protection.
Available in three different shell sizes.
REAR SPOILER
The sleek rear spoiler — more than just a stylish add-on, it’s a ticket to aerodynamic excellence, engineered to enhance airflow, reducing drag and improving overall stability.
VISOR RECOIL SYSTEM
The visor of the X.WST3 incorporates NEXX’s reliable Recoil Visor System, featuring spring-loaded base side plates. These plates automatically adjust, pulling the visor back against the dual-lip window beading to ensure a flawless airtight seal.
SUN VISORThe sun visor has been expanded by 18%, providing ample height to cover up to just above the nose bridge.
ANTI-VIBRATION EPS SYSTEM
The X.WST3 includes NEXX’s innovative Anti-Vibration EPS system—featuring a unique rubber trim between inner and outer EPS for micromovements that reduce helmet vibrations caused by high-speed air turbulence. Experience enhanced safety, head stability, and a smoother, more comfortable ride.
FRESH INSIDE, VISIBLE FROM THE OUTSIDE
The interior of the X.WST3 is distinguished by its modern comfort and meticulous material selection. Every aspect showcases a blend of synthetic leather, expansive ventilation mesh panels, dark reflector inserts and intricate stitching, creating a visually striking front. The interior fabrics are made from soft-touch X-Mart Dry fabrics that keep the interior cool and dry.
BEAT THE HEAT
The revolutionary Air combs introduce unprecedented levels of interior ventilation and comfort in the X.WST3. The crown pad of the helmet is skillfully crafted with this unique alveolar mesh, forming a fresh air chamber between the EPS liner and the padding.
JOIN THE SAFE, FAST EMERGENCY AND CLEANING REVOLUTION
The new lining F.R.S (Fast Release System) is distinguished by the simplicity with which it allows simultaneous removal of both cheek pads in just a few simple steps and without any tools. Easy to reach and even easier to operate – Patent pending F.R.S® is the perfect solution for interior cleaning but most importantly allowing rescue personnel to easily remove the helmet with minimum friction in an injured rider’s head, in case of an emergency.
EASY AND FAST
Simply lift the rubber trim arms that lock the buttons in both sides of the helmet, slide back the red buttons and both cheek pads are free to be fully removed.
SLEEK, LIGHTER, AND SMARTER THAN EVER
Subtle yet packed with powerful capabilities, the new X-COM3 series can be fully integrated into the helmet, with built-in earphones, battery, cable slots, microphone, and Bluetooth 5.2 technology, available in two variants: the X-COM3 standard, a mid-range version with capable features and the X-COM3 PRO that brings 2.0 Mesh Technology alongside other extra features and world-class sound by Harman Kardon.
CAPTURING STREET LIFE
Designed to keep your action camera securely and firmly in place during your street riding, the X.WST3 comes with a removable side mount – so you can capture your rides!
X.WST3 - X.MATRIX2 SHELL TECHNICAL SPECIFICATIONS
The circumference of the head should be measured with a cloth measuring tape at a point just above the eyebrows, around the ears, and at a point in the back of the head that results in the largest possible measurement. Take several measurements to make sure you have the largest one. Compare to the size chart below. If you are in between sizes, better to choose the larger size.
The cheek pads should be in contact with the cheeks with a snug fit but without excessive pressure. Look for gaps between the temples and the brow pad. After this, check movement of the helmet up and down and side to side. As you test the movement, the helmet padding should not slide easily over the skin, but rather, should pull the skin in the direction of rotation. A proper-fitting helmet will feel snug with fairly even pressure around the sides and top of your head.
NEXX X.WST3 - ZERO PRO CARBON - MT BLACK
A JOURNEY OF WILD ENCOUNTERS IN THE STREETS
The X.WST 3 is a streetfighter helmet with one of the most dissident designs within the style. The sport character of the X.WST 3 along with NEXX’s hi-tech features makes it a safe and versatile choice for everyday use.
CONTEMPORARY MASTERY
The X.WST3 shell is made from ultralight and highly impact-resistant X-PRO Carbon fiber, a cutting-edge technology that blends aerospace expertise with 3K carbon.
This composite construction not only makes the shell lighter and stronger but also enhances overall comfort, available in three different shell sizes.
REAR SPOILER
The sleek rear spoiler — more than just a stylish add-on, it’s a ticket to aerodynamic excellence, engineered to enhance airflow, reducing drag and improving overall stability.
VISOR RECOIL SYSTEM
The visor of the X.WST3 incorporates NEXX’s reliable Recoil Visor System, featuring spring-loaded base side plates. These plates automatically adjust, pulling the visor back against the dual-lip window beading to ensure a flawless airtight seal.
SUN VISORThe sun visor has been expanded by 18%, providing ample height to cover up to just above the nose bridge.
2 VISORS INCLUDED
X.WST3 ZERO PRO comes with two visors (Clear + Smoke 80%) and Pinlock 120 XLT Max Vision, all included in the box.
ANTI-VIBRATION EPS SYSTEM
The X.WST3 includes NEXX’s innovative Anti-Vibration EPS system—featuring a unique rubber trim between inner and outer EPS for micromovements that reduce helmet vibrations caused by high-speed air turbulence. Experience enhanced safety, head stability, and a smoother, more comfortable ride.
FRESH INSIDE, VISIBLE FROM THE OUTSIDE
The interior of the X.WST3 is distinguished by its modern comfort and meticulous material selection. Every aspect showcases a blend of synthetic leather, expansive ventilation mesh panels, dark reflector inserts and intricate stitching, creating a visually striking front. The interior fabrics are made from soft-touch X-Mart Dry fabrics that keep the interior cool and dry.
BEAT THE HEAT
The revolutionary Air combs introduce unprecedented levels of interior ventilation and comfort in the X.WST3. The crown pad of the helmet is skillfully crafted with this unique alveolar mesh, forming a fresh air chamber between the EPS liner and the padding.
JOIN THE SAFE, FAST EMERGENCY AND CLEANING REVOLUTION
The new lining F.R.S (Fast Release System) is distinguished by the simplicity with which it allows simultaneous removal of both cheek pads in just a few simple steps and without any tools. Easy to reach and even easier to operate – Patent pending F.R.S® is the perfect solution for interior cleaning but most importantly allowing rescue personnel to easily remove the helmet with minimum friction in an injured rider’s head, in case of an emergency.
EASY AND FAST
Simply lift the rubber trim arms that lock the buttons in both sides of the helmet, slide back the red buttons and both cheek pads are free to be fully removed.
SLEEK, LIGHTER, AND SMARTER THAN EVER
Subtle yet packed with powerful capabilities, the new X-COM3 series can be fully integrated into the helmet, with built-in earphones, battery, cable slots, microphone, and Bluetooth 5.2 technology, available in two variants: the X-COM3 standard, a mid-range version with capable features and the X-COM3 PRO that brings 2.0 Mesh Technology alongside other extra features and world-class sound by Harman Kardon.
CAPTURING STREET LIFE
Designed to keep your action camera securely and firmly in place during your street riding, the X.WST3 comes with a removable side mount – so you can capture your rides!
X-LOCK SYSTEM
All the X.WST3 Carbon vesions come with Double D-Ring with and X-LOCK magneic button to facilitate final fastening.
X.WST3 - X-PRO CARBON SHELL TECHNICAL SPECIFICATIONS
The circumference of the head should be measured with a cloth measuring tape at a point just above the eyebrows, around the ears, and at a point in the back of the head that results in the largest possible measurement. Take several measurements to make sure you have the largest one. Compare to the size chart below. If you are in between sizes, better to choose the larger size.
The cheek pads should be in contact with the cheeks with a snug fit but without excessive pressure. Look for gaps between the temples and the brow pad. After this, check movement of the helmet up and down and side to side. As you test the movement, the helmet padding should not slide easily over the skin, but rather, should pull the skin in the direction of rotation. A proper-fitting helmet will feel snug with fairly even pressure around the sides and top of your head.
REV'IT! COMPONENT 2 H20 JACKET - AUBERGINE
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
DIRT Series, waterproof, lightweight, comfortable, active fit off-road.
The evolution of a DIRT Series modern classic, the Component 2 H2O builds upon this pinnacle adventure jacket’s well-received, feature-driven design approach by making the stand-out details even better and adding another few for good measure.
Form and function in fashionable harmony
Inspired by designs used throughout the outdoor segment, it’s very much form and function in fashionable harmony. Not to say it’s a compromise – more the exact opposite. Its strategically matched, abrasion resistant Cordura® ripstop and PWR|Shell stretch ripstop materials give a hard-wearing, durable look to the Component 2 H2O’s actual tactical and lightweight characteristics. With 100% wind and waterproof, laminated hydratex, CE-level 1 SEESMART armor, and an added pouch to upgrade things with a CE-level 2 SEESOFT back protector, the Component 2 H2O pulls out all the stops.
Get your adventure on
With its removable hood, comfort-boosting neoprene collar, and ample ventilation, the Component 2 H2O is very much ready to hit the road. There’s still everything you need to take to the roads less traveled – or just leave the road altogether. Its active fit adds a casual, outdoor lifestyle feel, while the comfortably sizing has been primarily designed to slip over our Proteus protector jacket for when you’re really looking to get your adventure on.
Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.
REV'IT! COMPONENT 2 H20 JACKET - BROWN
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
DIRT Series, waterproof, lightweight, comfortable, active fit off-road.
The evolution of a DIRT Series modern classic, the Component 2 H2O builds upon this pinnacle adventure jacket’s well-received, feature-driven design approach by making the stand-out details even better and adding another few for good measure.
Form and function in fashionable harmony
Inspired by designs used throughout the outdoor segment, it’s very much form and function in fashionable harmony. Not to say it’s a compromise – more the exact opposite. Its strategically matched, abrasion resistant Cordura® ripstop and PWR|Shell stretch ripstop materials give a hard-wearing, durable look to the Component 2 H2O’s actual tactical and lightweight characteristics. With 100% wind and waterproof, laminated hydratex, CE-level 1 SEESMART armor, and an added pouch to upgrade things with a CE-level 2 SEESOFT back protector, the Component 2 H2O pulls out all the stops.
Get your adventure on
With its removable hood, comfort-boosting neoprene collar, and ample ventilation, the Component 2 H2O is very much ready to hit the road. There’s still everything you need to take to the roads less traveled – or just leave the road altogether. Its active fit adds a casual, outdoor lifestyle feel, while the comfortably sizing has been primarily designed to slip over our Proteus protector jacket for when you’re really looking to get your adventure on.
Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.
REV'IT! COMPONENT 2 H20 JACKET - BLACK
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
DIRT Series, waterproof, lightweight, comfortable, active fit off-road.
The evolution of a DIRT Series modern classic, the Component 2 H2O builds upon this pinnacle adventure jacket’s well-received, feature-driven design approach by making the stand-out details even better and adding another few for good measure.
Form and function in fashionable harmony
Inspired by designs used throughout the outdoor segment, it’s very much form and function in fashionable harmony. Not to say it’s a compromise – more the exact opposite. Its strategically matched, abrasion resistant Cordura® ripstop and PWR|Shell stretch ripstop materials give a hard-wearing, durable look to the Component 2 H2O’s actual tactical and lightweight characteristics. With 100% wind and waterproof, laminated hydratex, CE-level 1 SEESMART armor, and an added pouch to upgrade things with a CE-level 2 SEESOFT back protector, the Component 2 H2O pulls out all the stops.
Get your adventure on
With its removable hood, comfort-boosting neoprene collar, and ample ventilation, the Component 2 H2O is very much ready to hit the road. There’s still everything you need to take to the roads less traveled – or just leave the road altogether. Its active fit adds a casual, outdoor lifestyle feel, while the comfortably sizing has been primarily designed to slip over our Proteus protector jacket for when you’re really looking to get your adventure on.
Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.
REV'IT! COMPONENT JACKET - BLACK - M, XXL - SALE!
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
DIRT Series, waterproof, lightweight, comfortable, active fit off-road jacket
Meet the pinnacle product of REV'IT'S DIRT Series off-road collection: The Component Jacket. It’s the go-to, full-zippered jacket for the off-road rider that needs a CE-certified, lightweight, comfortable, active-fitting, and waterproof garment for all adventures on the trails. The hard shell construction is made from a flexible & waterproof stretch ripstop fabric, along with Cordura® ripstop at the shoulders & arms for increased abrasion resistance. REVIT's open-structured SEESMART™ CE-level 1 protectors found at the shoulders & elbows provide the rider’s necessary armor, plus you can add the REV'IT! Slingshot Back Protector. Alternatively, the CE-level 1 elbow and shoulder protectors can be easily removed if the rider wants to *upgrade their protection by wearing REVIT's body-hugging Proteus protector jacket (with CE-level 1 & 2 protectors) underneath. Ventilation zippers at the lower & upper arms keep riders cool while a detachable hood/storm collar keeps the rider dry off the bike and can be stored in the back pocket when taken off/not in use.
*Make sure the included SEESMART™ armor is removed before upgrading the protection otherwise the ideal fit won’t be achieved & discomfort may ensue.
REV'IT! BLACKWATER 2 H20 SMOCK - BLACK-ORANGE
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Fully functional aesthetics never looked this good. With a design borrowing heavily from the outdoor scene, the CE-certified motorcycle-ready Blackwater 2 H2O smock is all about looking purposeful as much as being purposeful. Inherent to the smock jacket concept, you put it on over your head, which is made easy with the addition of a side-entrance zipper. Keeping the front clean, and fully weatherproof.
Function-focused, fit for purpose
Regardless of the basic, function-focused approach, the Blackwater 2 H2O advances the motorcycle smock jacket concept with laminated, waterproof hydratex material, beefed-up abrasion resistance with Cordura® ripstop, and PWR|Shell stretch ripstop to secure wearing comfort and stretch.
Ready for pure-blooded adventure
Although it’s looks make intentions clear – it’s a pure-blooded off-road adventure jacket – the Blackwater 2 H2O is packed with CE-level 1 SEESMART protective armor at shoulders and elbows, and there’s a pouch ready to add an optional CE-level 2 SEESOFT back protector, assuring you’re safe when adventures take you across tarmac. When it’s time for serious off-road adventuring, the Blackwater 2 H2O is designed to be worn over our Proteus protector jacket. Just remember to take the standard shoulder and elbow armor out first to keep things fitting safely and comfortably.
Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.
REV'IT! PROTEUS PROTECTOR JACKET
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Lightweight, breathable protector underjacket/jersey jacket
REV'ITs lightweight & breathable Proteus protector jacket functions as an upgrade for the DIRT Series collection, which is worn under the jersey or various jackets we offer. Ideal stretch, ventilation, & armor allow you to ride protected on the trails less travelled. It’s constructed with a combination of densely woven Hicom mesh on the shoulders, a 2-way spandex mesh body, and PWR|Stretch mesh on the inner area of the sleeves. This combination provides optimal support, airflow, and flexibility. Furthermore, it features our award-winning SEEFLEX™ CE-level 2 protection at the shoulders and elbows. It is also equipped with a SEESOFT™ CE-level 2 back protector and SEESOFT™ CE-level 1 protectors at the chest. Thumb loops at the cuffs along with the stretch cuff will make sure the sleeves won’t slide when you’re putting it on or during riding.
Lining: 3D mesh
Features
Protection
Certification
This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved CU rating. For more details about certification click here.
REV'IT! SURFACE JACKET - BROWN
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.
REV'IT! COMPONENT H20 PANTS - BLACK
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
DIRT Series, waterproof, knee brace-ready, lightweight off-road pants
Take on any adventure in any weather with our CE-certified and waterproof, active fit, over-the-boot Component H2O hard shell pants. The outer shell is made of the rugged abrasion-resistant CORDURA® ripstop fabric laminated with our waterproof hydratex® membrane. PWR|Shell Ripstop stretch is used on the inside of the legs and upper knees for maximum flexibility and comfort. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle. A removable thermal liner will keep the rider comfortable and warm in lower temperatures. Protection is provided by our removable SEESMART™ CE-level 1 protectors at the hips and knees. Furthermore, the knee construction is designed to work with knee braces or our Scram knee protector sock – with the SEESMART™ protectors first removed, of course. For convenience purposes, the upper legs are equipped with cargo pockets as well as waterproof ventilation zippers to cool the rider down in warm weather. To get the right fit every time, we have equipped these pants with a ratchet waist closure, along with a silicon waistband to keep the pants from sliding down. Adjustment tabs on the calves provide plenty of adjustability to complement any type of motorcycle boots. A grip patch will ensure that the rider will not slide off the seat when it is wet or dry. Additionally, the lower legs are equipped with a special gator that goes over the boot to block out water and mud. Ride long and far with the Component H2O pants.
REV'IT! CONTINENT PANTS - BROWN
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
DIRT Series, over-boot, off-road, lightweight, flexible riding pants
Enjoy endless off-road exploration on two wheels with our CE-certified and splash proof, active fit over-the-boot Continent hard shell pants – as part of our DIRT Series collection. On the inside of the legs and upper knees, the Continent has been engineered with the rugged abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch for maximum flexibility and comfort. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle. Protection is provided by our removable SEESMART™ CE-level 1 protectors at the hips and knees. Furthermore, the knee construction is designed to work with knee braces or our Scram knee protectors – with the SEESMART™ protectors first removed, of course. For convenience purposes, the upper legs are equipped with cargo pockets for added storage options, and ventilation zippers to cool the rider down. For the right fit, we’ve included a ratchet waist closure, along with a silicon waistband to keep the pants from sliding down. Additionally, the lower legs are equipped with a special gator that goes over the boot to block out water and mud.
REV'IT! CONTINENT PANTS - BLACK
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
DIRT Series, over-boot, off-road, lightweight, flexible riding pants
Enjoy endless off-road exploration on two wheels with our CE-certified and splash proof, active fit over-the-boot Continent hard shell pants – as part of our DIRT Series collection. On the inside of the legs and upper knees, the Continent has been engineered with the rugged abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch for maximum flexibility and comfort. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle. Protection is provided by our removable SEESMART™ CE-level 1 protectors at the hips and knees. Furthermore, the knee construction is designed to work with knee braces or our Scram knee protectors – with the SEESMART™ protectors first removed, of course. For convenience purposes, the upper legs are equipped with cargo pockets for added storage options, and ventilation zippers to cool the rider down. For the right fit, we’ve included a ratchet waist closure, along with a silicon waistband to keep the pants from sliding down. Additionally, the lower legs are equipped with a special gator that goes over the boot to block out water and mud.
REV'IT! SURFACE PANTS - BLACK
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
REV'IT! EXPEDITION GTX BOOTS
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
We’ve made our award-winning ADV motorcycle boots even better and here’s how. They combine the protection of MX boots with breathable GORE-TEX Performance Comfort waterproofing and unsurpassed comfort on and off the bike. Furthermore, the solution to reaching the next level of protection without sacrificing next-level rider comfort was the development of the Dynamic Support Frame (DSF).
The REV’IT!|DSF ensures maximum freedom of movement in the ankle and prevents hyper extension of the tendons and muscles. The DSF system, reinforced toe box, SEESOFT in the tongue and hard shell shin plate all work together to protect your feet from impacts. The specially developed Vibram® Apex sole provides maximum grip, stability, and control while riding and walking.
To tighten the Expedition GTX motorcycle boots, we’ve incorporated the unique BOA® closure system to facilitate a perfect fit. It’s also extremely fast in operation and contributes to the overall lightweight characteristics of the Expedition boot. The included OrthoLite® insole makes the boot very comfortable on and off the bike.
Experience the top-level REV’IT! Expedition GTX motorcycle boots. Unparalleled comfort, freedom, and safety all wrapped in one technically advanced package.
REV'IT! PENINSULA PANTS - BLACK
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
DIRT Series, In-boot, off-road, lightweight, flexible riding pants
Meet the Peninsula. A purpose-built pair of active fit pants for riders who prefer to wear their gear tucked inside their boots instead of over them – as part of our DIRT Series collection. The CE-certified pants are constructed of highly abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch on the inside legs, lower legs, and upper knees. This allows for maximum movement and comfort. Our flexible, lightweight, and removable SEESMART™ CE-level 1 protectors are featured at the hips and knees. And when the SEESMART™ armour is removed from the knees, the pants can be worn over our CE-level 2 Scram knee protectors. The Peninsula is also patterned to accommodate aftermarket knee braces underneath. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle while optimal fit is ensured by the ratchet waist closure while the silicon waistband will keep the pants from sliding down. In warmer temperatures, the long ventilation zippers can be zipped open to cool down the rider. And in terms of keeping your essentials close by, storage is provided by cargo pockets at the upper legs.
REV'IT! PENINSULA PANTS - DARK NAVY
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
DIRT Series, In-boot, off-road, lightweight, flexible riding pants
Meet the Peninsula. A purpose-built pair of active fit pants for riders who prefer to wear their gear tucked inside their boots instead of over them – as part of our DIRT Series collection. The CE-certified pants are constructed of highly abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch on the inside legs, lower legs, and upper knees. This allows for maximum movement and comfort. Our flexible, lightweight, and removable SEESMART™ CE-level 1 protectors are featured at the hips and knees. And when the SEESMART™ armour is removed from the knees, the pants can be worn over our CE-level 2 Scram knee protectors. The Peninsula is also patterned to accommodate aftermarket knee braces underneath. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle while optimal fit is ensured by the ratchet waist closure while the silicon waistband will keep the pants from sliding down. In warmer temperatures, the long ventilation zippers can be zipped open to cool down the rider. And in terms of keeping your essentials close by, storage is provided by cargo pockets at the upper legs.
REV'IT! PENINSULA PANTS - CAMO GREY
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
DIRT Series, In-boot, off-road, lightweight, flexible riding pants
Meet the Peninsula. A purpose-built pair of active fit pants for riders who prefer to wear their gear tucked inside their boots instead of over them – as part of our DIRT Series collection. The CE-certified pants are constructed of highly abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch on the inside legs, lower legs, and upper knees. This allows for maximum movement and comfort. Our flexible, lightweight, and removable SEESMART™ CE-level 1 protectors are featured at the hips and knees. And when the SEESMART™ armour is removed from the knees, the pants can be worn over our CE-level 2 Scram knee protectors. The Peninsula is also patterned to accommodate aftermarket knee braces underneath. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle while optimal fit is ensured by the ratchet waist closure while the silicon waistband will keep the pants from sliding down. In warmer temperatures, the long ventilation zippers can be zipped open to cool down the rider. And in terms of keeping your essentials close by, storage is provided by cargo pockets at the upper legs.
REV'IT! ONE PIECE SUIT PARAMOUNT GTX - DARK BLUE
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
REV'IT! STRATUM GTX JACKET
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada
Next-generation, 2-layer jacket for adventure riding in any type of weather.
PRODUCT DESCRIPTION
The Stratum (which means layers of rock) GTX motorcycle jacket is our next-generation adventure motorcycle jacket that consists of two outer shells. The base outer shell is comprised of air mesh with built-in protectors and on top of that, a GORE-TEX waterproof outer shell can be used during rides in cold or wet weather. This new two-layer system provides maximum versatility and comfort in any season or any weather conditions.
During rides in Spring/Summer or warmer temperatures, the class AA CE-certified air mesh layer will keep you cool and comfortable; allowing air to flow toward the body. The air mesh motorcycle jacket is equipped with our position-adjustable CE-level 2 SEEFLEX protectors at the elbows as well as a CE-level 2 SEESOFT back protector. An extra upgrade can easily be made by adding our CE-Level 1 chest protectors. The detachable kidney belt provides stability and protection to the lower back area. Additionally, a hydration bag can be fitted in the pocket around back.
When the weather takes a turn for the worse or for when you’re intentionally riding in colder and wet climates, the waterproof 3L GTX laminated shell can be added on top of the air mesh motorcycle jacket, providing maximum waterproofing and weather protection. This waterproof shell is level B CE-certified and combined with the AA Air mesh layer it offers the highest level of protection in our adventure collection. Ventilation zippers on the front, back, and upper arms will direct airflow to your body when the sun is beaming down. The detachable hood - which protects your neck against the elements during riding - can be stored in the XL back pocket when not needed.
Take on any adventure in any weather with the Stratum GTX motorcycle jacket.
COMFORT FEATURES
Adjustability:
Adjustable elbow protection
Adjustment drawcord at hem
Adjustment drawcord at waist
Adjustment tab at cuffs
Adjustment tab at lower arm
elasticated cuff
Elasticated waist
Pockets:
Sleeve pocket
Slit pocket at back
Slit pocket at chest
Two inner pockets
Two slit pockets on front
Two waterproof inner pockets
Two waterproof slit pockets on front
XL storage pocket
Lining:
3D mesh
Mesh
Features:
Adjustment drawcord at hood
Detachable hood
Detachable kidney belt
Double front zipper
External hang loop
Short connection zipper
Soft edge at collar
Stretchable cuff
Stretch at back
Stretch at elbows
Stretch at shoulders
TIZIP® waterproof front zipper
CLIMATE FEATURES
Waterproofing:
3L GORE-TEX fabric
Ventilation:
Panels inside arms
Ventilation panel behind center front zipper
Ventilation panels on back
Zipper at center front
Zipper at upper back
Zippers on upper arms
PROTECTION FEATURES
Protection:
3D mesh protector pockets
Prepared for SEESOFT™ CE-level 1 Divided Insert Chest Protector
Protective print at elbows
SEEFLEX™ CE-level 2 Elbow Protectors
SEEFLEX™ CE-level 2 Shoulder Protectors
SEESOFT AIR CE Level 2 on back
Thumb loops
Outer shell material:
3L GORE-TEX nylon 400D fabric
3L GORE-TEX Pro Armacor fabric
3L nylon 200D GORE-TEX fabric
Neoprene
Polyester mesh
PWR|Shell mesh
PWR|Shell ripstop stretch
PWR|Shell stretch
Visibility:
Laminated reflection at front
Laminated reflection at upper arms
Laminated reflection on back
Laminated reflection on hood
Laminated reflective logo on back
REV'IT! DOMINATOR 3 GTX JACKET - BLACK
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
It’s a daunting task when trying to improve upon the pinnacle motorcycle jacket of our adventure collection, but we made it happen. The Dominator 3 GTX motorcycle jacket has enhanced ventilation, waterproofing, and refinements to every element of the construction to upgrade performance and comfort for the rider. The fully waterproof motorcycle jacket features the tried and tested 3L GORE-TEX laminate with an updated, clean design. The detachable storm collar - which protects the neck of the rider against the elements - can be stored in the back pocket when not needed.
The stretch cuffs are also detachable and will block cold air trying to flow into the sleeves of the motorcycle jacket. In higher temperatures, airflow to the body is improved by redesigned VCS|Zippers at the upper and lower arms while our patented VCS|Aquadefence panels on the chest cool down the upper body. The 3L GORE-TEX Pro reinforced Armacor fabric is used on the shoulders for extra abrasion resistance and durability. Protection is solidified by our award-winning SEEFLEX CE-level 2 armor at the shoulders and elbows and the SEESOFT CE-level 2 back protector. The motorcycle jacket is prepared for our SEESOFT CE-level 1 divided chest protectors. The detachable kidney belt provides stability and protection to the lower back area.
Go ahead, travel anywhere, anytime with the Dominator GTX motorcycle jacket. Your next adventure awaits.
REV'IT! DOMINATOR 3 GTX JACKET - SILVER-ANTHRACITE - XL - LAST ONE - SALE!
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
It’s a daunting task when trying to improve upon the pinnacle motorcycle jacket of our adventure collection, but we made it happen. The Dominator 3 GTX motorcycle jacket has enhanced ventilation, waterproofing, and refinements to every element of the construction to upgrade performance and comfort for the rider. The fully waterproof motorcycle jacket features the tried and tested 3L GORE-TEX laminate with an updated, clean design. The detachable storm collar - which protects the neck of the rider against the elements - can be stored in the back pocket when not needed.
The stretch cuffs are also detachable and will block cold air trying to flow into the sleeves of the motorcycle jacket. In higher temperatures, airflow to the body is improved by redesigned VCS|Zippers at the upper and lower arms while our patented VCS|Aquadefence panels on the chest cool down the upper body. The 3L GORE-TEX Pro reinforced Armacor fabric is used on the shoulders for extra abrasion resistance and durability. Protection is solidified by our award-winning SEEFLEX CE-level 2 armor at the shoulders and elbows and the SEESOFT CE-level 2 back protector. The motorcycle jacket is prepared for our SEESOFT CE-level 1 divided chest protectors. The detachable kidney belt provides stability and protection to the lower back area.
Go ahead, travel anywhere, anytime with the Dominator GTX motorcycle jacket. Your next adventure awaits.
REV'IT! POSEIDON 3 GTX JACKET - BLACK
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
GORE-TEX touring jacket for all-season adventure riding
Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.
REV'IT! VALVE H20 JACKET
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
A top-spec, waterproof, CORIUM+® laminated leather/textile jacket for multi-season on-road touring.
The Valve H2O is our fully loaded touring jacket prepared for asphalt adventures in any season. Thanks to the combination of waterproof CORIUM+® leather on the arms and the breathable 3L CORIUM+® textile laminate on the body of the motorcycle jacket, you are always fully protected from the elements. A detachable thermal liner will keep you warm while riding in colder temperatures. And to improve your comfort level even more, we added a detachable storm collar to keep away the wind and rain from your neck.
When the temperatures start to rise while riding, you can easily direct cool air to your upper body with the help of our VCS|Aquadefence ventilation system. Just open up the flaps on the chest and secure them with the magnetic Fidlock® system. All of this can be done with one hand while riding. By opening the ventilation zippers on the back, the warm air from inside the jacket can easily escape, helping to keep your upper body at the ideal temperature.
Rain or shine, cold or warm, it doesn’t really matter. The Valve H2O motorcycle jacket will get you to your destination in comfort.
Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.
REV'IT! DEFENDER 3 GTX JACKET - SAND-BLACK
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
The Defender 3 GTX is designed for those who dream of exploring uncharted horizons and don't stop until they’ve fulfilled that dream. No matter what weather types you might encounter while chasing that dream, the Defender Pro GTX will help keep you going thanks to the detachable waterproof liner with a 3L GORE-TEX membrane. This waterproof motorcycle jacket is also equipped with a removable thermal liner for rides in colder weather. If you are looking for a motorcycle jacket with ample ventilation features, look no further because this motorcycle jacket has plenty of options to regulate the amount of airflow to your body.
Next to the VCS|Ventilation panels on the front and the multiple zippers on the arm and back, the motorcycle jacket also comes with a main front zipper that can be zipped open to reveal a mesh ventilation panel that directs a cool flow of air onto your body. With all the ventilation panels and zippers open, a lot of air will flow through the entire motorcycle jacket keeping you cool during rides in high temperatures. No matter what road you take - if there even is a road - this motorcycle jacket will keep you safe thanks to the SEEFLEX CE-level 2 protectors (at the shoulders and elbows) combined with the highly abrasion-resistant outer shell that is partly constructed with the rugged ripstop material.
To increase the abrasion resistance on the high impact areas of the outer shell, we added a protective multi-layer print to the elbow area as an additional layer of protection. It also comes prepared for the SEESOFT CE-level 2 back protector and our SEESOFT CE-level 1 divided chest protectors. If you want to upgrade even further, you can connect our Segur neck brace to the connection points on the jacket. There is plenty of space to store your essential belongings in the two front pockets, big rear pocket and two inner pockets. We also added a left sleeve pocket for easy access to payment cards or toll tickets without taking your gloves off. The front pockets can be closed with zippers to make sure your valuable possessions will stay put and will arrive together with you at your destination.
With our fully loaded versatile, do-it-all Defender 3 GTX jacket you can fulfil your dreams and explore the uncharted in any weather that nature throws your way.
Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.
REV'IT! DEFENDER 3 GTX JACKET - RED-BLUE
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
The Defender 3 GTX is designed for those who dream of exploring uncharted horizons and don't stop until they’ve fulfilled that dream. No matter what weather types you might encounter while chasing that dream, the Defender Pro GTX will help keep you going thanks to the detachable waterproof liner with a 3L GORE-TEX membrane. This waterproof motorcycle jacket is also equipped with a removable thermal liner for rides in colder weather. If you are looking for a motorcycle jacket with ample ventilation features, look no further because this motorcycle jacket has plenty of options to regulate the amount of airflow to your body.
Next to the VCS|Ventilation panels on the front and the multiple zippers on the arm and back, the motorcycle jacket also comes with a main front zipper that can be zipped open to reveal a mesh ventilation panel that directs a cool flow of air onto your body. With all the ventilation panels and zippers open, a lot of air will flow through the entire motorcycle jacket keeping you cool during rides in high temperatures. No matter what road you take - if there even is a road - this motorcycle jacket will keep you safe thanks to the SEEFLEX CE-level 2 protectors (at the shoulders and elbows) combined with the highly abrasion-resistant outer shell that is partly constructed with the rugged ripstop material.
To increase the abrasion resistance on the high impact areas of the outer shell, we added a protective multi-layer print to the elbow area as an additional layer of protection. It also comes prepared for the SEESOFT CE-level 2 back protector and our SEESOFT CE-level 1 divided chest protectors. If you want to upgrade even further, you can connect our Segur neck brace to the connection points on the jacket. There is plenty of space to store your essential belongings in the two front pockets, big rear pocket and two inner pockets. We also added a left sleeve pocket for easy access to payment cards or toll tickets without taking your gloves off. The front pockets can be closed with zippers to make sure your valuable possessions will stay put and will arrive together with you at your destination.
With our fully loaded versatile, do-it-all Defender 3 GTX jacket you can fulfil your dreams and explore the uncharted in any weather that nature throws your way.
Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.
BELL BROOZER HELMET - DUPLET GLOSS NARDO GRAY
Combine dual-certification for both full-face and open-face riding, a removable chin bar and integrated drop-down shield, and a weight of 1350 grams for a winning combo.
A brutal combination of attitude, style, and functionality makes the Broozer a true streetfighter. Dual-certified for both full-face and open-face riding, the removable chin bar and integrated drop-down shield means the Broozer is ready for anything. Combine this with the Bell fit you love and a lean fighting weight of 1350 grams, and you have yourself a ringer. Availability, certification, color, and pricing may vary per region. If outside of the USA, please check with your authorized local dealer for more information.
| CONSTRUCTION |
LIGHTWEIGHT LG® PC/ABS SHELL
|
|---|---|
| SPORT |
POWERSPORTS
|
| VENTILATION |
ADJUSTABLE SLIDER VENTS ON UPPER SHELL AND CHIN BAR
|
| FIT SYSTEM |
3 EPS SIZES FOR MAXIMUM COMFORT AND SIZE RANGE
|
| CERTIFICATION |
DOT (US)
ECE (EU)
|
| ANTI-FOG COATING |
ANTI-FOG SHIELD
|
BELL BROOZER HELMET - PRIME GLOSS WARM GRAY - L
Combine dual-certification for both full-face and open-face riding, a removable chin bar and integrated drop-down shield, and a weight of 1350 grams for a winning combo.
A brutal combination of attitude, style, and functionality makes the Broozer a true streetfighter. Dual-certified for both full-face and open-face riding, the removable chin bar and integrated drop-down shield means the Broozer is ready for anything. Combine this with the Bell fit you love and a lean fighting weight of 1350 grams, and you have yourself a ringer. Availability, certification, color, and pricing may vary per region. If outside of the USA, please check with your authorized local dealer for more information.
| CONSTRUCTION |
LIGHTWEIGHT LG® PC/ABS SHELL
|
|---|---|
| SPORT |
POWERSPORTS
|
| VENTILATION |
ADJUSTABLE SLIDER VENTS ON UPPER SHELL AND CHIN BAR
|
| FIT SYSTEM |
3 EPS SIZES FOR MAXIMUM COMFORT AND SIZE RANGE
|
| CERTIFICATION |
DOT (US)
ECE (EU)
|
| ANTI-FOG COATING |
ANTI-FOG SHIELD
|
BELL ELIMINATOR HELMET - BLACK
The Eliminator's DNA threads together a storied history of burned rubber, dragstrip lights, and white knuckles. This purpose-built street brawler was designed with the checkered flags in mind.
The Eliminator delivers bold, assertive street performance. Sixty years of evolution is rolled into a stripped down, no-BS helmet that combines a lightweight, comfortable fit with a legendary reputation for protection. Its auto-inspired design features a fiberglass composite shell and can be worn with a no-fog face shield or visor. Scorch the dragstrip. Carve the canyons. Own the streets.
BELL ELIMINATOR HELMET - GT GLOSS BLACK/WHITE
The Eliminator's DNA threads together a storied history of burned rubber, dragstrip lights, and white knuckles. This purpose-built street brawler was designed with the checkered flags in mind.
The Eliminator delivers bold, assertive street performance. Sixty years of evolution is rolled into a stripped down, no-BS helmet that combines a lightweight, comfortable fit with a legendary reputation for protection. Its auto-inspired design features a fiberglass composite shell and can be worn with a no-fog face shield or visor. Scorch the dragstrip. Carve the canyons. Own the streets.
BELL BULLITT - GLOSS BLACK
MODERN CLASSIC
The Bullitt is an iconic product, a helmet rooted in a storied past mixed with a style and design that could best be described as "retro-future." Inspired by the legendary Bell Star helmets of the '60s and '70s but speaking a modern design language, the Bullitt became an instant classic the moment it hit the streets. We use only the highest-quality ingredients, right down to the last stitch of its genuine leather interior, to create this functional work of art. Available in fiberglass composite and featuring many shield options to further customize this one-of-a-kind helmet. No matter what, how, or where you ride, the Bullitt is in a class by itself. Includes Clear faceshield.
BELL BULLITT - COMMAND (VINTAGE WHITE / OXBLOOD / BLUE)
MODERN CLASSIC
The Bullitt is an iconic product, a helmet rooted in a storied past mixed with a style and design that could best be described as "retro-future." Inspired by the legendary Bell Star helmets of the '60s and '70s but speaking a modern design language, the Bullitt became an instant classic the moment it hit the streets. We use only the highest-quality ingredients, right down to the last stitch of its genuine leather interior, to create this functional work of art. Available in fiberglass composite and featuring many shield options to further customize this one-of-a-kind helmet. No matter what, how, or where you ride, the Bullitt is in a class by itself. Includes Clear faceshield.
BELL BULLITT - GLOSS CANDY RED
MODERN CLASSIC
The Bullitt is an iconic product, a helmet rooted in a storied past mixed with a style and design that could best be described as "retro-future." Inspired by the legendary Bell Star helmets of the '60s and '70s but speaking a modern design language, the Bullitt became an instant classic the moment it hit the streets. We use only the highest-quality ingredients, right down to the last stitch of its genuine leather interior, to create this functional work of art. Available in fiberglass composite and featuring many shield options to further customize this one-of-a-kind helmet. No matter what, how, or where you ride, the Bullitt is in a class by itself. Includes Clear faceshield.
BELL MOTO 3 - STEVE MCQUEEN ANY GIVEN SUNDAY GLOSS WHITE/BLACK
MOTO 3. NOT RETRO. ORIGINAL.
The iconic legend has returned! When the original Moto-3 was created back in the late 70s it was a product ahead of its time. Quickly becoming the industry standard in performance and style, today's Moto-3 is everything it was style-wise, with the added benefits of modern saftey and production advancements. From the fiberglass composite shell to the EPS-lined chin bar, we left no detail unpolished. The solid colors use the original style terrycloth liner, which is removable and washable.
SHOEI RF-1400 - MATTE BLACK
SHOEI NEOTEC 3 HELMET - MATTE BLACK
Experience the road with the Neotec 3, a symbol of SHOEI's commitment to excellence. This helmet introduces cutting-edge flip-up technology and boasts a sleek design for the discerning rider. Engineered for unmatched comfort, the Neotec 3 embodies SHOEI's dedication to superior quality and style.
The Neotec 3 is the most compact, aerodynamic, efficient, and advanced flip-up helmet.
It is the perfect companion for every two-wheeled exploration, with supreme comfort for a relaxed ride. Wherever the road leads you, the Neotec 3 impresses with style and precision. Pushing boundaries with its innovative flip-up mechanism, ECE 22.06 homologation, sleek helmet shape, and ultimate wearing comfort.
The versatility of this two-in-one helmet, combined with superior aerodynamics, an enhanced sun visor, and the seamless integration of the Shoei SRL3 comm system (sold separately), makes the Neotec 3 the perfect companion.
Note: If you'd like to add the optional integrated SENA SRL3 Bluetooth Communication System click here to add to your cart.
What's Included?
DMD RIVALE HELMET ECE 22.06 - RAZOR
Meet the RIVALE, the latest addition to the DMD family. With such an essential design it’s easy to forget there’s real innovation and technology within. Thanks to the new tri compound fiber, DMD have achieved a super compact helmet with all the modern security standards and a comfortable fit. A full-face helmet that recalls the roaring years of Motorsport. Made in Italy, with passion.
Each helmet comes with a clear visor. Dark Smoke accessory visors can be purchased separately here.
TECHNICAL DETAILS
PRODUCT CARE
DMD RIVALE HELMET ECE 22.06 - MATTE BLACK
Meet the RIVALE, the latest addition to the DMD family. With such an essential design it’s easy to forget there’s real innovation and technology within. Thanks to the new tri compound fiber, DMD have achieved a super compact helmet with all the modern security standards and a comfortable fit. A full-face helmet that recalls the roaring years of Motorsport. Made in Italy, with passion.
Each helmet comes with a clear visor. Dark Smoke accessory visors can be purchased separately here.
TECHNICAL DETAILS
PRODUCT CARE
DMD RETRO JET HELMET ECE 22.06 - RAINBOW VIOLET
The jet Retro Rainbow Violet helmet is simple yet striking thanks to the glitter finish that complements a monochrome purple base. The fit is comfortable and meets all modern safety requirements. Suitable for those who like simple lines and an essential design on their motorcycle.
KEY FEATURES
Simple but impressive: glitter gives a special note where simplicity meets perfection.
Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.
Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell
TECHNICAL DETAILS:
PRODUCT CARE
DMD RETRO JET HELMET ECE 22.06 - RAINBOW GREEN
The jet Retro Rainbow Green helmet is simple yet striking thanks to the glitter finish that complements a monochrome green base. The fit is comfortable and meets all modern safety requirements. Suitable for those who like simple lines and an essential design on their motorcycle.
KEY FEATURES
Simple but impressive: glitter gives a special note where simplicity meets perfection.
Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.
Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell
TECHNICAL DETAILS:
PRODUCT CARE
DMD RETRO JET HELMET ECE 22.06 - RAINBOW
The jet Retro Rainbow helmet is simple yet striking thanks to the glitter finish that complements a monochrome silver base. The fit is comfortable and meets all modern safety requirements. Suitable for those who like simple lines and an essential design on their motorcycle.
KEY FEATURES
Simple but impressive: glitter gives a special note where simplicity meets perfection.
Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.
Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell
TECHNICAL DETAILS:
PRODUCT CARE
DMD RETRO JET HELMET ECE 22.06 - DEEP GREEN
The jet Retro Deep Green helmet is part of the single-color range and comes in a shiny green finish. Safe, comfortable, and compact in size, it fits perfectly on any type of motorcycle, be it Custom, Vintage, or Cafe Racer.
KEY FEATURES
Simple but impressive: glitter gives a special note where simplicity meets perfection.
Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.
Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell
TECHNICAL DETAILS:
PRODUCT CARE
DMD VINTAGE JET HELMET ECE 22.05 - MATTE GREEN - S - SALE!
The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its plush inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet fashionable and stylish with an original design. Each model has its own personality with cool custom paints.
TECHNICAL DETAILS:
PRODUCT CARE
DMD VINTAGE JET HELMET ECE 22.05 - LIGHT BLUE - SIZE S, L - SALE!
The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its plush inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet fashionable and stylish with an original design. Each model has its own personality with cool custom paints.
TECHNICAL DETAILS:
PRODUCT CARE
FUEL BOURBON JACKET - SIZE XXL
Please check and follow the size guide. If you're between sizes, pick one size larger.
▪ Class AAA certified
▪ 100% cowhide leather jacket.
▪ Natural tanning process
▪ Removable D3O® Ghost™ armour on elbows and shoulders.
▪ Removable D3O® Viper Stealth armour on the back.
▪ Pullers made from cowhide leather.
▪ YKK Zippers
▪ Side accordion panels for good comfort
▪ CE prEN 17092-2:2020
Note: measurements are of the jacket when laid flat in centimeters (cm). Please compare measurements to a jacket that fits you well. If you are in between sizes, we suggest sizing up to the next size.
FUEL RALLY 2 JACKET - BLACK - SIZE 3XL
The Rally 2 Jacket represents a significant upgrade in both technical prowess and functionality compared to its predecessor. Designed for comfort and protection in any weather, it's your go-to for adventures. Stay dry in the rain, warm with the removable liner, and safe with built-in protections. Let nothing hold you back from chasing your dreams and discovering the extraordinary.
The Rally 2 Jacket is meticulously designed and crafted for touring and adventure enthusiasts, ensuring that you can travel through different climates or countries without being hindered by rain or cold.
The outer layer of the jacket is constructed from 500D Nylon with a PU coating for water repellency. For added protection during heavy rainfall, the jacket features a waterproof Tricot TPU seam-sealed membrane that hangs inside the outer shell (drop liner), keeping you completely dry. This method of construction provides an exceptional level of comfort on those long days on the road or trail.
When temperatures drop, just put on the removable 3 layer laminated softshell liner. It will keep you warm and dry, serving as a versatile standalone piece you can wear even when you’re not on the motorcycle.
As for protection and your peace of mind, our gear includes top-of-the-line D3O® brand level 1 protections delivering a high level of security for all your adventures.
This Jacket is CE certified at AA Level.
All measurements are of the jacket when laid flat in centimeters (cm). We suggest comparing with a jacket you own that fits you well to help narrow down sizing. If in between sizes, better to take the larger size.
FUEL BUNKER JACKET - SIZE XL - LAST ONE!
Introducing the Bunker Jacket, a 3/4-length jacket inspired by military and early motorcycle jackets. This rugged jacket is crafted from wet wax repellent canvas and reinforced with 100% polyester 300D in areas most susceptible to falls.
For the coldest seasons, its classy removable winter down lining guarantees warmth and comfort, rendering it a versatile garment that you can wear perfectly even when you’re off your motorcycle.
In essence, the Bunker Jacket is a timeless piece that will never go out of style, designed to last a lifetime. Discover the perfect blend of heritage and modern functionality with this jacket.
Additionally, the inclusion of a waterproof membrane between the outer fabric and lining results in an ideal jacket for wet weather conditions.
A classy removable winter down lining guarantees warmth and comfort, rendering it a versatile garment that you can wear perfectly even when you’re off your motorcycle.
The jacket has obtained the AAA certification, which is the highest in safety, and it also includes the high-quality 3DO protections for an additional layer of security.
Tech Specs:
- Outer fabric: wet wax water repellent canvas 40% polyamide, 60% cotton.
- Shoulder and elbow panels reinforced with polyester 300D for enhanced abrasion resistance.
- Twill lining fabric 98% cotton, 2% spandex.
All measurements are in inches with the garment laid flat. If you're in between sizes, we recommend choosing the larger size.
FUEL SAFARI JACKET - BLACK - SIZE L
The Safari Jacket is inspired by the jackets of the first explorers to reach the unknown continents. It is the perfect companion for all your adventures in the wildest places of the world.
A 3/4 jacket made with Fuel 3CORE: a fabric with a high abrasion resistance that, together with its protection in the back, shoulders, and elbows, has obtained the European Class AAA and the UKCA certificates. Ripstop fabric 100% Nylon with PU coating that makes it water-repellent, cold resistant and wear resistant to damage from normal usage.
A 3/4 jacket made with Fuel 3CORE: a fabric with a high abrasion resistance that, together with its protection in the back, shoulders, and elbows, has obtained the Class AAA CE Certified and the UKCA certificates.
A small pin on the lapel, a piece of fabric to better close the collar and keep the air out, leather reinforcements at strategic points and a uniquely designed buckle.
4 pockets in the front (two of them large in size) and two in the back, where in one of them you can find a water-resistant jacket folded into a bag in case of rain to wear over the jacket and be protected from water.
▪ Fuel 3CORE single layer fabric
▪ Removable Smoothways CE level 2 protectors on the back, elbows, and shoulders
▪ Packable rain jacket
▪ YKK double rack zipper
▪ CE EN17092-3:2020 Class AAA certified
▪ UKCA certified
What is Fuel 3CORE Fabric?
Technology is changing and growing fast. This is why after two years of development, we developed the FUEL 3CORE fabric, to guarantee customer satisfaction and improve our products.
Fuel 3CORE fabric is produced with leading-edge tri-core technology: a new revolutionary technology resulting in a lighter fabric with significantly improved performance in both strength and comfort. The Fuel 3CORE single layer is an abrasion-resistant fabric with bi-stretch exclusively developed for our products, so you can leave the main road safer, lighter, and even more comfortable.
All measurements are in centimeters (cm) with the garment laid flat. We suggest you compare the measurements below with a jacket you already own to help narrow down your size.
FUEL ASTRAIL JACKET - LUCKY EXPLORER - SIZE L
Introducing the Astrail Jacket, a versatile and durable piece of equipment designed for dual sport riders who demand stylish and high-quality gear for both on and off-road adventures. Made with a combination of polyamide and ripstop fabrics, this jacket is built to withstand the toughest terrain and weather conditions.
All measurements below are of the garment when laid flat in centimeters (cm). We suggest comparing to a jacket you own that fits you well to help narrow down the size. If in between sizes, best to select the larger size.
FUEL ASTRAIL JACKET - NAVY - SIZE M
Introducing the Astrail Jacket, a versatile and durable piece of equipment designed for dual sport riders who demand stylish and high-quality gear for both on and off-road adventures. Made with a combination of polyamide and ripstop fabrics, this jacket is built to withstand the toughest terrain and weather conditions.
All measurements below are of the garment when laid flat in centimeters (cm). We suggest comparing to a jacket you own that fits you well to help narrow down the size. If in between sizes, best to select the larger size.
FUEL FXS JACKET - SALE!
Fuel x Scalpers Collection - Limited Edition
After racing through the Italian beaches, we present a high quality classic black leather jacket. Thanks to its removable protections, you can wear it on and off your bike!
If you love the feeling of freedom and risk, this collection inspired by the motorcycle beach races of the 50s, is for you.
Please check and follow the size guide. If you're between sizes, pick one size larger.
PROTECTION / TECHNICAL SPECIFICATIONS
| SMALL | MEDIUM | LARGE | XL | XXL | |
| CHEST | 56 | 58 | 60 | 62 | 64 |
| LENGTH | 70 | 71 | 72 | 73 | 74 |
| SLEEVE | 68 | 69 | 70 | 71 | 72 |
Note: Measurements provided are in centimeters (cm) of the product when laid flat, not body measurements. Due to specific fabric used, measurements can vary by up to 5%
AGE OF GLORY MISSION JACKET - BLACK
Mission Waxed Cotton Jacket Black
When the escape is imperative...when freedom calls and you want to ride without a care in the world and take advantage of the moment and the surrounding landscapes, your mission is clear. Inspired by the 70s, the Mission Jacket will be the answer to your call for adventure in wide open deserts or on winding roads through the mountains. Resistant and waterproof, this is the jacket to help you escape without thinking of how to get back, without knowing where this road will lead you … Let yourself go!
This jacket is CE/UKCA certified at level AAA for the highest level of abrasion resistance and includes Level 2 shoulder and elbow armour for the best level of impact absorption.
Note: This product is manufactured using natural products with waxed treatments using a handmade process. Therefore none of them are strictly identical, and some imperfections or effects variations may appear. This makes each jacket unique.
Shoulders (A)
Standing up straight with arms at your sides, have someone help you place a tape measure on your back from the broadest point of your left shoulder across to the broadest point of your right shoulder.
Chest (B)
With your arms at your sides, place a tape measure under your arms and run it around the fullest part of your chest and across the shoulder blades.
Hips (C)
With feet together, run a tape measure around the fullest part of your hips/seat, about 7 to 8 inches below your waistline, where the jacket ends.
Don't forget to consider that jackets will be worn over a tee-shirt or sweatshirt/pullover. Measures may vary up to 5%.
All measurements below are taken in centimeters (cm) with the garment laid flat.
| Size | Shoulders (A) | Chest (B) | Hips (C) | Back Length (D) |
| S | 53 | 58 | 55.5 | 78.5 |
| M | 54 | 60 | 57.5 | 79.5 |
| L | 55 | 62 | 59.5 | 80.5 |
| XL | 56 | 64 | 61.5 | 81.5 |
| XXL | 57 | 66 | 63.5 | 82.5 |
AGE OF GLORY MISSION JACKET - BROWN
Mission Waxed Cotton Jacket Brown
When the escape is imperative...when freedom calls and you want to ride without a care in the world and take advantage of the moment and the surrounding landscapes, your mission is clear. Inspired by the 70s, the Mission Jacket will be the answer to your call for adventure in wide open deserts or on winding roads through the mountains. Resistant and waterproof, this is the jacket to help you escape without thinking of how to get back, without knowing where this road will lead you … Let yourself go!
This jacket is CE/UKCA certified at level AAA for the highest level of abrasion resistance and includes Level 2 shoulder and elbow armour for the best level of impact absorption.
Note: This product is manufactured using natural products with waxed treatments using a handmade process. Therefore none of them are strictly identical, and some imperfections or effects variations may appear. This makes each jacket unique.
Shoulders (A)
Standing up straight with arms at your sides, have someone help you place a tape measure on your back from the broadest point of your left shoulder across to the broadest point of your right shoulder.
Chest (B)
With your arms at your sides, place a tape measure under your arms and run it around the fullest part of your chest and across the shoulder blades.
Hips (C)
With feet together, run a tape measure around the fullest part of your hips/seat, about 7 to 8 inches below your waistline, where the jacket ends.
Don't forget to consider that jackets will be worn over a tee-shirt or sweatshirt/pullover. Measures may vary up to 5%.
All measurements below are taken in centimeters (cm) with the garment laid flat.
| Size | Shoulders (A) | Chest (B) | Hips (C) | Back Length (D) |
| S | 53 | 58 | 55.5 | 78.5 |
| M | 54 | 60 | 57.5 | 79.5 |
| L | 55 | 62 | 59.5 | 80.5 |
| XL | 56 | 64 | 61.5 | 81.5 |
| XXL | 57 | 66 | 63.5 | 82.5 |
AGE OF GLORY CRAFTSMAN JACKET - CARAMEL
Craftsman Jacket Caramel
This workwear style jacket is a tribute to the hard working and talented craftsmen. The ones that devote their time to create great products with passion and thoroughness to offer the best end result possible. This lifestyle jacket is a great durable vintage jacket that will be your best companion for your everyday adventures. A jacket to wear in every circumstance.
Shoulders (A)
Standing up straight with arms at your sides, have someone help you place a tape measure on your back from the broadest point of your left shoulder across to the broadest point of your right shoulder.
Chest (B)
With your arms at your sides, place a tape measure under your arms and run it around the fullest part of your chest and across the shoulder blades.
Hips (C)
With feet together, run a tape measure around the fullest part of your hips/seat, about 7 to 8 inches below your waistline, where the jacket ends.
Don't forget to consider that jackets will be worn over a tee-shirt or sweatshirt/pullover. Measures may vary up to 5%.
All measurements below are taken in centimeters (cm) with the garment laid flat.
| Size | Shoulders (A) | Chest (B) | Hips (C) | Back Length (D) |
| S | 51 | 57 | 52 | 70 |
| M | 52 | 59 | 54 | 71 |
| L | 53 | 61 | 56 | 72 |
| XL | 54 | 63 | 58 | 73 |
| XXL | 55 | 65 | 60 | 74 |
AGE OF GLORY CRAFTSMAN JACKET - BLACK
Craftsman Jacket Black
This workwear style jacket is a tribute to the hard working and talented craftsmen. The ones that devote their time to create great products with passion and thoroughness to offer the best end result possible. This lifestyle jacket is a great durable vintage jacket that will be your best companion for your everyday adventures. A jacket to wear in every circumstance.
Shoulders (A)
Standing up straight with arms at your sides, have someone help you place a tape measure on your back from the broadest point of your left shoulder across to the broadest point of your right shoulder.
Chest (B)
With your arms at your sides, place a tape measure under your arms and run it around the fullest part of your chest and across the shoulder blades.
Hips (C)
With feet together, run a tape measure around the fullest part of your hips/seat, about 7 to 8 inches below your waistline, where the jacket ends.
Don't forget to consider that jackets will be worn over a tee-shirt or sweatshirt/pullover. Measures may vary up to 5%.
All measurements below are taken in centimeters (cm) with the garment laid flat.
| Size | Shoulders (A) | Chest (B) | Hips (C) | Back Length (D) |
| S | 51 | 57 | 52 | 70 |
| M | 52 | 59 | 54 | 71 |
| L | 53 | 61 | 56 | 72 |
| XL | 54 | 63 | 58 | 73 |
| XXL | 55 | 65 | 60 | 74 |
AGE OF GLORY CABIN VEST - CARAMEL
Cabin Vest Caramel
The Cabin vest was inspired by workwear garments and made in a durable and comfortable fabric, much like the popular Age of Glory Craftsman jacket. It can be worn over a t-shirt or over a jacket, whatever your preference. There are also suede details and a multitude of pockets, including a large one on the back. We think it's the perfect vest: combining style, comfort and utility.
Measuring Tips to Assure The Best Fit
Chest
With arms at your sides, place a tape measure under your arms and run it around the fullest part of your chest and across the shoulder blades.
Don't forget to consider that you may wish to wear your vest over a tee-shirt or sweatshirt/pullover, or a jacket so leave enough room to accommodate however you plan to wear it. Measures may vary up to 5%.
All measurements below are taken in centimeters (cm).
| Size | Height (cm) | Chest (cm) |
| S | 166-171 | 90-96 |
| M | 170-175 | 97-103 |
| L | 176-181 | 104-110 |
| XL | 180-185 | 111-117 |
| XXL | 184-189 | 116-121 |
AGE OF GLORY CABIN VEST - BLACK
Cabin Vest Black
The Cabin vest was inspired by workwear garments and made in a durable and comfortable fabric, much like the popular Age of Glory Craftsman jacket. It can be worn over a t-shirt or over a jacket, whatever your preference. There are also suede details and a multitude of pockets, including a large one on the back. We think it's the perfect vest: combining style, comfort and utility.
Measuring Tips to Assure The Best Fit
Chest
With arms at your sides, place a tape measure under your arms and run it around the fullest part of your chest and across the shoulder blades.
Don't forget to consider that you may wish to wear your vest over a tee-shirt or sweatshirt/pullover, or a jacket so leave enough room to accommodate however you plan to wear it. Measures may vary up to 5%.
All measurements below are taken in centimeters (cm).
| Size | Height (cm) | Chest (cm) |
| S | 166-171 | 90-96 |
| M | 170-175 | 97-103 |
| L | 176-181 | 104-110 |
| XL | 180-185 | 111-117 |
| XXL | 184-189 | 116-121 |
MERLIN MAHALA PRO 3-IN-1 D30 EXPLORER JACKET OLIVE/BLACK
MERLIN SAYAN D3O® LAMINATED JACKET - KHAKI
Merlin Sayan D3O® Laminated Jacket
As part of the growing laminate range within the Explorer Collection, Sayan arrives as a timeless classic with leather overlays to the shoulders and elbows in a classic British four-pocket style. Designed and tested with adventure in mind, this is a lightweight, durable and versatile option for those looking to go that bit further. Five-piece D3O® is pre-fitted to the garment with pockets for additional chest protectors. Sayan is available in three colour options – black, khaki or olive green.
Materials
AquaSeal+ Waterproof and Breathable Laminated Tape Seamed Outer Shell
Leather Reinforcement Panels To Shoulders and Elbows
Antibacterial Inner Mesh Lining
YKK® Waterproof Zippers
Zip Out 125gsm Thermal Lining
Protection
D3O® LP1 Shoulder And Elbow Protectors Pre-Fitted
D3O® Viper Stealth Back Protector Pre-Fitted
D3O® Chest Protector Pockets
CE EN17092 Level ‘AA’
Pockets
Two Large Chest Cargo Pockets
Two Large Lower Cargo Pockets
Large Rear Cargo Pocket
Coin/Toll Pocket To Arm
Nelson Pocket Behind Storm Flap
Patch Pocket On Removable Thermal
One Zipped And One Snap Closure Pocket On Fixed Lining
Features
Neoprene Soft Trim Collar and Cuff Edges
Brushed Collar With Snap Stud Back Fold
Chest Vents, Bicep Vents and Rear Ventilation Points
Cuff, Forearm, Bicep, Hem and Waist Size Adjustment Points
Double Layer Front Storm Flap
Merlin Branded Metal Snap Studs
Short and Long YKK® Jacket-to-Jean Connecting Zippers
Caring for your Sayan jacket
To care for your jacket, remove all armour from the shoulders, elbows and back and also any removable inner liners. Use a lint-free brush or cloth to really get into any especially dirty areas, then hand-wash the jacket with a mild or diluted detergent in lukewarm water. Full care information can be found in the dedicated care guide here: Merlin Wash & Care.
MERLIN CONDOR LAMINATED D3O® TROUSER - BLACK
Merlin Condor® Laminated Trouser
Perfectly matching with the Solitude and Sayan laminated jackets, the Condor trouser can connect up with the long or short zippers, and has the same high quality AquaSeal+ laminate outer shell. Adjustment points at the waist and calf help riders achieve a personalised fit, while YKK® waterproof zippers open to allow better airflow on those warm rides. A long length zipper with gusset features at the ankle to easily slide over bulkier adventure-style boots.
Materials
AquaSeal+ Waterproof and Breathable Laminated Tape Seamed Outer Shell
AquaSeal+ Waterproof and Breathable Reinforcement Panels
Leather Inside Calf Panel
Antibacterial Inner Mesh Lining
YKK® Waterproof Thigh Zippers
Zip Out 125gsm Thermal Lining
Elasticated Boot Seal To The Ankle
Protection
D3O® LP1 Knee And Hip Protectors Pre-Fitted
CE EN17092 Level ‘AA’
Pockets
Two Large Thigh Pockets
Features
Double Waist Snap With YKK® Fly Zipper
Two Velcro Waist Size Adjustment Points
Long Thigh Ventilation Point
Pre-Curved Knee For Better Riding Fit
Calf and Ankle Velcro Size Adjustment Points
Merlin Branded Metal Snap Studs
Short and Long YKK Jacket-to-Jean Connecting Zippers
Caring for your Condor Trousers
To care for your trousers, remove all armour and also any removable inner liners, if applicable. Use a lint-free brush or cloth to really get into any especially dirty areas, then hand-wash with a mild or diluted detergent in cool water. Full care information can be found in the dedicated care guide here: Merlin Wash & Care or in the product label.
MERLIN EDALE II COTEC D3O JACKET - OLIVE GREEN
Merlin Edale II Cotec D3O Jacket
The second generation of our hugely popular Edale waxed cotton motorcycle jacket has arrived. With the greatest features of our first-generation technical waxed cotton this updated garment sees improvements fed back from years of consumers testing, from around the world. Constructed from 8oz Cotec, this Halley Stevensons®-Merlin collaboration fabric remains exclusive to Merlin and is half the weight but twice the strength of our traditional waxed cotton. Edale II makes use of Outlast® temperature regulating technology within the thermal liner, which can be zipped out if necessary and the garment has even better breathability with an up-spec Humax waterproof membrane. Other improvements include fit, closures, armour positioning, waterproof external pockets, trims and accessories, for an even more refined motorcycle garment.
Materials
Exclusive 8oz Halley Stevensons® Cotec Waxed Cotton
Texland™ Humax® 15k/10k Waterproof/Breathable Membrane
Outlast® Temperature Regulating Removable Thermal Liner
British, Marton Mills® Tartan Liner Trim
YKK® Zippers Used Throughout
Leather Piped Collar, Cuffs and Pocket Edges
Corduroy Inside Facing, Inside Collar and Inside Cuffs
Protection
D3O® LP1 Shoulder And Elbow Protectors Pre-Fitted
D3O® Viper Large Back Protector Pre-Fitted
CE EN17092 Level AA Garment
Pockets
Two Chest Pockets With Expansion Pleat
Two Lower Waterproof Pockets With Expansion Pleat
Large Rear Cargo Pocket For Gloves/Accessories
Inside Facing Jet Pocket
Internal Pockets
Toll/Coin Stash Pocket On Forearm
Features
NightGloss® Reflective Turn Up On Collar
Ventilation Points Front And Rear
Side Entry Hand Warmer Pockets With Magnetic Closure
Drawcord Waist Adjustment
Pinch Closure Centre Front Snap Studs
Diamond Quilted Arms, Chest and Elbows
Cuff, Forearm and Bicep Snap Stud Fit Adjusters
Merlin Branded Antique Brass Finish Hardware
Fold Back Collar Strap
Short Jacket-To-Jean Connecting Zipper
Euro Hoop Jacket-To-Jean Connecting Strap
Caring for your Edale II Cotec jacket
To care for your jacket, begin by lightly brushing off any dirt or soil, and use a cold damp cloth if necessary to wipe down the jacket. Clean it in this way regularly to maintain its appearance, but don’t be too harsh as the wax will be removed. You can re-wax the jacket when it loses its waxed finish and water begins to soak into the cotton rather than bead off. Please do not machine wash, tumble dry or use hot water on your jacket. Full care information can be found in our dedicated care guide: Merlin Wash & Care.
MERLIN EDALE II COTEC D3O JACKET - BLACK
Merlin Edale II Cotec D3O Jacket
The second generation of our hugely popular Edale waxed cotton motorcycle jacket has arrived. With the greatest features of our first-generation technical waxed cotton this updated garment sees improvements fed back from years of consumers testing, from around the world. Constructed from 8oz Cotec, this Halley Stevensons®-Merlin collaboration fabric remains exclusive to Merlin and is half the weight but twice the strength of our traditional waxed cotton. Edale II makes use of Outlast® temperature regulating technology within the thermal liner, which can be zipped out if necessary and the garment has even better breathability with an up-spec Humax waterproof membrane. Other improvements include fit, closures, armour positioning, waterproof external pockets, trims and accessories, for an even more refined motorcycle garment.
Materials
Exclusive 8oz Halley Stevensons® Cotec Waxed Cotton
Texland™ Humax® 15k/10k Waterproof/Breathable Membrane
Outlast® Temperature Regulating Removable Thermal Liner
British, Marton Mills® Tartan Liner Trim
YKK® Zippers Used Throughout
Leather Piped Collar, Cuffs and Pocket Edges
Corduroy Inside Facing, Inside Collar and Inside Cuffs
Protection
D3O® LP1 Shoulder And Elbow Protectors Pre-Fitted
D3O® Viper Large Back Protector Pre-Fitted
CE EN17092 Level AA Garment
Pockets
Two Chest Pockets With Expansion Pleat
Two Lower Waterproof Pockets With Expansion Pleat
Large Rear Cargo Pocket For Gloves/Accessories
Inside Facing Jet Pocket
Internal Pockets
Toll/Coin Stash Pocket On Forearm
Features
NightGloss® Reflective Turn Up On Collar
Ventilation Points Front And Rear
Side Entry Hand Warmer Pockets With Magnetic Closure
Drawcord Waist Adjustment
Pinch Closure Centre Front Snap Studs
Diamond Quilted Arms, Chest and Elbows
Cuff, Forearm and Bicep Snap Stud Fit Adjusters
Merlin Branded Antique Brass Finish Hardware
Fold Back Collar Strap
Short Jacket-To-Jean Connecting Zipper
Euro Hoop Jacket-To-Jean Connecting Strap
Caring for your Edale II Cotec jacket
To care for your jacket, begin by lightly brushing off any dirt or soil, and use a cold damp cloth if necessary to wipe down the jacket. Clean it in this way regularly to maintain its appearance, but don’t be too harsh as the wax will be removed. You can re-wax the jacket when it loses its waxed finish and water begins to soak into the cotton rather than bead off. Please do not machine wash, tumble dry or use hot water on your jacket. Full care information can be found in our dedicated care guide: Merlin Wash & Care.
MERLIN EDALE COTEC JACKET-BLACK - SIZE 3XL - LAST ONE!
Merlin Edale Cotec Jacket
Joining the ‘Tech Wax’ Heritage Collection, the Edale waxed cotton motorcycle jacket is a great option for riders looking for a retro-styled wax jacket that will see them through the winter. Constructed from 8oz Cotec, this Halley Stevensons-Merlin collaboration fabric is exclusive to us, and is stronger, lighter and more breathable than traditional waxed cotton. Edale makes use of Outlast temperature regulating technology within the thermal liner, which can be zipped out if necessary. It’s the details that count – brass-finished Merlin-branded press studs and quality YKK zippers adorn the outside of the jacket, and the inner lining features colour-matched Marton Mills tartan. Available in sizes S-4XL.
Materials
Exclusive Halley Stevensons® Collaborative Technical Wax Fabric - Cotec®
Reissa® Active Waterproof and Breathable Membrane
Outlast®'s Award Winning Temperature Regulating Liner (Removable)
Fixed cotton Lining
British Marton Mills® Tartan Liner Trim
YKK® Zippers Used Throughout
Antique Hardware
Protection
D3O® Tri-vented LP1 CE EN1621 Level 1 Shoulder and Elbow Armour Pre-fitted (Removable)
D3O® Viper Large Back Armour Pocket
CE EN17092 AA
Pockets
Four Patch Pockets Closed By Flap and Stud
Inside Facing Jet Pocket
Off Set Rear Glove Storage Pocket
Internal Pockets
Features
Ventilation Front and Back
Side Entry Hand Warmer Pockets
Draw Cord Waist Adjustment
Adjustable Collar
Short YKK® Jacket To Trouser Connecting Zip
Euro Jacket To Jean Connector Hoop
Caring for your Edale Cotec jacket
To care for your jacket, begin by lightly brushing off any dirt or soil, and use a cold damp cloth if necessary to wipe down the jacket. Clean it in this way regularly to maintain its appearance, but don’t be too harsh as the wax will be removed. You can re-wax the jacket with our Merlin Wax Cotton Tin when it loses its waxed finish and water begins to soak into the cotton rather than bead off. Please do not machine wash, tumble dry or use hot water on your jacket. Full care information can be found in our dedicated care guide: Merlin Wash & Care.
MERLIN TEWKESBURY COTEC JACKET - OLIVE
Merlin Tewkesbury Cotec Jacket
Taking its styling cues from a traditional high street fashion jacket, the Tewkesbury is constructed from the Merlin-exclusive waxed cotton Cotec – an 8oz lighter weight and more breathable wax produced by Halley Stevensons®. With D3O® armour pre-fitted to the shoulders and elbows and a pocket for an optional D3O® back protector, Tewkesbury is both protective and stylish. The fixed Reissa® waterproofing and double-layer storm flap under the central zip combines with a 70g thermal wadding for weatherproofing for an all-season riding jacket.
Materials
Protection
Pockets
Features
Caring for your Tewkesbury jacket
To care for your jacket, begin by lightly brushing off any dirt or soil, and use a cold damp cloth if necessary to wipe down the jacket. Clean it in this way regularly to maintain its appearance, but don’t be too harsh as the wax will be removed. You can re-wax the jacket with our Merlin Wax Cotton Tin when it loses its waxed finish and water begins to soak into the cotton rather than bead off. Please do not machine wash, tumble dry or use hot water on your jacket. Full care information can be found in our dedicated care guide: Merlin Wash & Care.
MERLIN PERTON II COTEC D3O JACKET - BLACK
Merlin Perton II Cotec D3O Jacket
The second generation of our highly regarded short cut waxed cotton motorcycle jacket has arrived. With the greatest features of our first-generation technical waxed cotton this updated garment sees improvements fed back from years of consumers testing, from around the world. Constructed from 8oz Cotec, this Halley Stevensons®-Merlin collaboration fabric remains exclusive to Merlin and is half the weight but twice the strength of our traditional waxed cotton. Perton II makes use of Outlast® temperature regulating technology within the thermal liner, which can be zipped out if necessary and the garment has even better breathability with an up-spec Humax waterproof membrane. Perton II is an even more refined product for the rider looking for both style and protection.
Materials
8oz Halley Stevensons® Cotec Waxed Cotton
Texland™ Humax® 15k/10k Waterproof/Breathable Membrane
Outlast® Temperature Regulating Removable Thermal Liner
British Marton Mills® Tartan Liner Trim
YKK® Zippers Used Throughout
Leather Piped Collar, Cuffs and Pocket Edges
Corduroy Collar and Cuffs
Protection
D3O® LP1 Shoulder And Elbow Protectors Pre-Fitted
D3O® Viper Large Back Protector Pre-Fitted
CE EN17092 Level AA Garment
Pockets
Two Chest Pockets With Expansion Pleat
Two Lower Zipped Pockets With Zip Garage
Inside Facing Jet Pocket
Internal Pockets
Toll/Coin Stash Pocket On Forearm
Features
NightGloss® Reflective Turn Up On Collar
Ventilation Points Front And Rear
Snap Stud Hem Adjustment
Pinch Closure Centre Front Snap Studs
Diamond Quilted Shoulder Overlays
Cuff and Bicep Snap Stud Fit Adjusters
Merlin Branded Antique Brass Finish Hardware
Short Jacket-To-Jean Connecting Zipper
Euro Hoop Jacket-To-Jean Connecting Strap
Caring for your Perton II Cotec jacket
To care for your jacket, begin by lightly brushing off any dirt or soil, and use a cold damp cloth if necessary to wipe down the jacket. Clean it in this way regularly to maintain its appearance, but don’t be too harsh as the wax will be removed. You can re-wax the jacket when it loses its waxed finish and water begins to soak into the cotton rather than bead off. Please do not machine wash, tumble dry or use hot water on your jacket. Full care information can be found in our dedicated care guide: Merlin Wash & Care.
TCX DRIFTER WATERPROOF (WP) BOOTS - VINTAGE BROWN
The TCX Drifter Waterproof Boots are protective and flexible, well-rounded adventure touring boots designed to handle everything your ADV bike was born to do. The integrity of the leather upper is formative enough to flex for walking and shifting comfort, but formidable enough to meet the demands of the trail. With malleolus inserts, calf and shift reinforcements, aluminum buckles and polyurethane shin plates, the waterproof-lined TCX Drifter Boots are prepared for off-road adventure. The lug sole achieves grip in any terrain, wet or dry, so your footing will never falter in the TCX Drifter WP Boots.
Grain leather upper with pull-up finishing; microfibre front and rear padded area. Rear reflex insert. Ergonomic stretch upper collar to keep outside dirt and debris
TCX CLIMATREK SURROUND GTX BOOTS - BLACK/GREY
Certified motorcycle boots with Gore-Tex Surround® technology, designed to offer protection, breathability, waterproofing, and comfort when walking.
TCX Climatrek Surround® boots are designed to offer the perfect combination of protection when you’re riding your bike and versatility when you come off it, in every situation, from urban to outdoors. Climatrek Surround® is a certified shoe with reinforcements on the ankle, toe, and heel, laced with a lace holder and reflective inserts. TCX Climatrek Surround® certified motorcycle boots are designed to offer maximum waterproofing and breathability, through the combination of the Gore-Tex Extended Comfort® membrane and Gore-Tex Surround® technology. The technical fabric coupled with the waterproof and highly breathable Gore-Tex Extended Comfort® membrane is combined with the special Gore-Tex Surround® construction designed to channel heat and moisture outwards. The sole, equipped with a ventilation grille to allow perfect insulation from atmospheric agents and at the same time promote continuous heat exchange between the inside and outdoors, is ideal for hotter climates and three-season use. The Groundtrax® sole features a special tread pattern and compound designed to ensure stability and grip on the foot pegs and controls, combined with maximum traction and great comfort when walking on all terrain. The OrthoLite® foam insole allows air to circulate, wicking away moisture and keeping the foot dry at all times. The material can compress and easily return to its initial state, so that cushioning, fit and comfort are unchanged over time.
TCX BLEND 2 WATERPROOF (WP) BOOTS - BROWN
Certified waterproof leather motorcycle boots. Protective and comfortable for everyday use.
The TCX Blend 2 WP motorcycle boots are certified waterproof lace-up amphibious boots made of full-grain leather with waterproof T-DRY membrane and vintage effect pull-up finish. They ensure the highest level of safety thanks to the protective inserts on the ankles and the reinforcements in the gearshift, toe and heel area. The Blend 2 WP boots feature a Groundtrax® rubber sole, guaranteeing optimal stability, grip and abrasion resistance. The OrthoLite® footbed offers perfect cushioning of the sole of the foot even after numerous uses and high levels of breathability, for maximum comfort in every situation.
DETAILS
TCX DARTWOOD WATERPROOF (WP) MOTO SHOES - BLACK
TCX STREET 3 TEX WATERPROOF (WP) SHOES - BLACK/GREY - SIZE 44 - SALE!
The TCX Street 3 Tex is a rugged, street-ready motorcycle boot with a casual look resembling your favourite skate sneakers. At home on or off the bike, this highly protective boot may be a looker, but it is packed with some of the most low-profile and effective rider protection available.
Being the textile variation of the Street 3, this boot is put together using suede leather with reinforced weft fabric for an alternative two-tone high street look and feel. At first glance, this may not seem a wise choice in wet weather, but the textile upper is backed up by TCX’s T-Dry lining, making the boot fully waterproof. The textile upper is complemented by a surrounding grey rubber sole made from a modern wear-resistant, dirt-repelling rubber compound from Groundtrax that is guaranteed to offer serious stability and grip.
Street 3 Tex owners will also be protected by the latest technology from ZPLATE with their advanced shank running down the centre of the shoe. This latest design gives the boot a more natural, free feeling flex compared to typical inserts, but crucially will protect your feet from impact in all directions.
Like many models in the TCX range, the Street 3 has newly developed low profile inserts in the malleolus area from D3O that have ‘Non-Newtonian’ characteristics. This means that the molecules within the armour flow freely in their standard form, but their viscosity can change to become more solid under force. Layman's terms: the Street 3 is super comfortable to wear but is set up to take an impact and keep you safe!
TCX FREYJA LADY WATERPROOF (WP) BOOTS - BLACK
Certified waterproof (WP) women's motorcycle boots. Maximum protection and comfort, fit optimized for the ergonomics of the female foot.
The Freyja Lady WP are certified women's motorcycle boots with protective reinforcements on the ankle, toe and heel. They are designed according to the Woman Fitting Concept, the special TCX protocol designed to combine the perfect fit for the female foot and maximum safety. Made of technical fabric combined with the T-DRY waterproof membrane, they have a tubular structure with an elasticated leg and two-level adjustable buckles for closure, side zip on the inside. The OrthoLite® footbed is designed to offer durable cushioning to the sole of the foot and high breathability, for maximum comfort even after prolonged use.
DETAILS
ETHEN SUNSET T-SHIRT - BLACK
For those who dream about riding off into the sunset, this is your dream come true. Made of 100% organic ring-spun cotton, this short-sleeved T-shirt, has a crew-neck, reinforced seams on the neck and shoulders, and a soft feel. Enjoy!
Composition 90% cotton 10% viscose
Weight: 140 g / m²
The below table outlines the width at the chest as well as the length of the T-shirt in centimeters (cm) when the garment is laid flat. We suggest comparing to a T-shirt you own that fits you well and then selecting your size accordingly.
| Size | S | M | L | XL | XXL | 3XL |
| Width (cm) | 47 | 50 | 53 | 56 | 59 | 61 |
| Length (cm) | 70 | 72 | 74 | 76 | 78 | 80 |
ETHEN LIVE FAST T-SHIRT - KHAKI
As an apex predator, Tigers enjoy the freedom of the outdoors, but they need to be fast to catch their prey. Be like a Tiger: Live fast. Ride free.
Made of 100% organic ring-spun cotton, this short-sleeved T-shirt, has a crew-neck, reinforced seams on the neck and shoulders, and a soft feel. Enjoy!
Composition 90% cotton 10% viscose
Weight: 140 g / m²
The below table outlines the width at the chest as well as the length of the T-shirt in centimeters (cm) when the garment is laid flat. We suggest comparing to a T-shirt you own that fits you well and then selecting your size accordingly.
| Size | S | M | L | XL | XXL | 3XL |
| Width (cm) | 47 | 50 | 53 | 56 | 59 | 61 |
| Length (cm) | 70 | 72 | 74 | 76 | 78 | 80 |
ETHEN LIVE FAST T-SHIRT - OFF WHITE
As an apex predator, Tigers enjoy the freedom of the outdoors, but they need to be fast to catch their prey. Be like a Tiger: Live fast. Ride free.
Made of 100% organic ring-spun cotton, this short-sleeved T-shirt, has a crew-neck, reinforced seams on the neck and shoulders, and a soft feel. Enjoy!
Composition 90% cotton 10% viscose
Weight: 140 g / m²
The below table outlines the width at the chest as well as the length of the T-shirt in centimeters (cm) when the garment is laid flat. We suggest comparing to a T-shirt you own that fits you well and then selecting your size accordingly.
| Size | S | M | L | XL | XXL | 3XL |
| Width (cm) | 47 | 50 | 53 | 56 | 59 | 61 |
| Length (cm) | 70 | 72 | 74 | 76 | 78 | 80 |
ETHEN LIVE FAST T-SHIRT - FOREST GREEN
As an apex predator, Tigers enjoy the freedom of the outdoors, but they need to be fast to catch their prey. Be like a Tiger: Live fast. Ride free.
Made of 100% organic ring-spun cotton, this short-sleeved T-shirt, has a crew-neck, reinforced seams on the neck and shoulders, and a soft feel. Enjoy!
Composition 90% cotton 10% viscose
Weight: 140 g / m²
The below table outlines the width at the chest as well as the length of the T-shirt in centimeters (cm) when the garment is laid flat. We suggest comparing to a T-shirt you own that fits you well and then selecting your size accordingly.
| Size | S | M | L | XL | XXL | 3XL |
| Width (cm) | 47 | 50 | 53 | 56 | 59 | 61 |
| Length (cm) | 70 | 72 | 74 | 76 | 78 | 80 |
