Riding Gear

REV'IT! OFFTRACK 2 JACKET - SAND-GREY

$ 8,711.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Versatile all-season jacket for adventure riding.

Adventure will take you wherever it may, but you still want to feel in control, even on unknown roads and through uncharted terrains. That’s why your motorcycle jacket should be a versatile companion – making your every mile safe, comfortable, and composed. So, if you’re looking for an all-season all-rounder, the Offtrack 2 H2O’s for you. Now you’re dressed to be in control of every adventure. Versatile line-up Confidence-inspiring design puts the focus on your unfolding adventure. When it’s hot out in the wild, well-proportioned VCS|Aquadefence panels increase airflow, while zippers on the forearms and back ventilate your upper body. Should the temperature drop, just zip the detachable thermal liner into the PWR|Shell, PWR|Ripstop outer. And in adverse weather, switch to the hydratex liner to stay dry. The thermal liner & removable waterproof liner are both separate wearable stand-alone jackets. The waterproof liner is also wearable over the top of the outer shell jacket, making the 100% waterproof WL the outermost layer for extreme wet weather conditions. One jacket, three modes; all the versatility. Explore safe Knowing your jacket is keeping you safe helps you enjoy the thrill of adventure riding – that’s the thinking behind the Offtrack H2O jacket. It’s also why it’s equipped with SEEFLEX CE-rated protection at the shoulders and elbows, plus the option of SEESOFT protectors for your back and chest.

COMFORT FEATURES

Adjustability:
Adjustable elbow protection

Adjustment drawcord at hem

Adjustment strap at lower arm

Adjustment tab at cuffs

Adjustment tab at upper arm

Double adjustment strap at waist

Flexisnap at collar
Pockets:
Inner pocket within thermal liner

Stash pocket on back

Two external pockets at thermal liner

Two inner pockets

Two inner waterproof pockets on waterproof liner

Two stash pockets at front

Waterproof inner pocket within waterproof liner
Lining:
Mesh

Soft spacer mesh
Features:
3L hydratex over jacket

Cuff zipper

Long connection zipper

Separately wearable thermal liner

Short connection zipper

Soft edge at collar

V-flap at cuff

CLIMATE FEATURES

Waterproofing:
Detachable hydratex®|3L liner
Insulation:
Detachable thermal liner
Ventilation:
Air outlet on upper back

Ventilation panels on chest

Zippers on lower arms

PROTECTION FEATURES

Protection:
Prepared for SEESOFT™ CE-level 1 Divided Insert Chest Protector

Prepared for SEESOFT™ CE-level 2 Insert Back Protector

SEEFLEX™ CE-level 2 Elbow Protectors

SEEFLEX™ CE-level 2 Shoulder Protectors

Soft spacer mesh protector pockets
Outer shell material:
High density polyester 600D

Mesh

PWR| shell ripstop

Softshell 3L
Visibility:
Laminated reflection at chest

Laminated reflection at upper arms

Laminated reflection on back

Laminated reflection on shoulders

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

REV'IT! SWIFTBLADE JACKET - BLACK-BLUE

$ 4,791.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Ventilated, textile and leather jacket for summer use

Meet the ventilated mesh and textile jacket component of the REV’IT! Ninety-Five Capsule collection.Introducing the Swiftblade. Its DNA With a combination of various materials all working together, including mesh, softshell, ripstop, and leather, that’s what gives the Swiftblade jacket its unique composition. And because of the inclusion of open-structured mesh that creates large ventilation panels, it’s a ventilated summer jacket that you’ll want to be seen with! It keeps you both looking and feeling cool when heading to your next destination. Setting it apart At the upper chest of the left side, race-inspired laminated prints including RV95 - the year of REV’IT!’s birth, 1995 - #thefuturebelongstous, and our Shield logo, make it immediately recognizable as something that sets it apart from the rest of the collection. You’ll also see the text, “Ready and willing to ignite,” because that’s what we are and that’s what this jacket does. It’s ready to play. Subtle branding is also found at the upper backside of the jacket.

Comfort features

Adjustability:
Adjustment strap at waist

Adjustment tab at cuffs
Pockets:
Inner pocket

Two slit pockets on front
Lining:
3D mesh

Mesh

Polyester ripstop
Features:
Jeans loop

Short connection zipper

Climate features

Protection features

Protection:
3D mesh protector pockets

Prepared for SEESOFT CE-level 2 Insert Back Protector

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors
Outer shell material:
Artificial Leather

buffalo leather

Polyester mesh

ripstop 600D

Softshell 3L

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

REV'IT! SAND 5 H20 GLOVES - BLACK

$ 2,759.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Waterproof, mid-cuffed, travel-ready gloves for all your adventures.

The Sand 5 H2O are the go-to gloves for the rider that doesn’t let grey skies and the possibility of rain get in the way of their riding plans. A strong foundation These gloves have been engineered specifically for riding on or off road during unstable weather conditions in spring, summer, or fall. By incorporating a waterproof and breathable hydratex|Z-liner construction with comfort-enhancing McFit® technology, these features help hands to stay dry and have a good grip when it’s slippery out there. We also introduce the tri-fleece push-pull liner to the Sand 5 H2O gloves (a feature normally found on our GTX aka GORE-TEX gloves) giving them the extra comfort factor and a premium feel. The safety element Armoring hands comes in many forms with the Sand 5 H2O gloves. The most prominent ones being the hard knuckle along with the TPU thumb protector and palm slider. TPR finger knuckles, reinforcements at the palm, a combination of leather and textile, an even larger visor wiper than before made of suede, and thanks to the rugged pull tab on the cuff, slipping on these gloves is a breeze and you can secure them in place with the hook-and-loop closure followed by the hook-and-loop wrist strap.

Comfort features

Adjustability:
Adjustment strap at wrist

Adjustment tab at cuff

Stretch at cuff

Stretch at thumb

Stretch fabric on back of hand

Stretch lips at fingers
Closure:
Hook-and-loop closure

Wrist strap
Lining:
Push-Pull tri-fleece liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Grip patch at thumb

Outseam stitching

Pull tab

Regular cuff

Suede leather visor wiper

Climate features

Waterproofing:
hydratex|Z-liner with McFit® technology

Protection features

Protection:
PWR|Yarn

Temperfoam® at cuff

Temperfoam® underneath knuckle protector

Temperfoam® underneath protectors

TPR finger knuckles

TPR hard shell knuckle

TPR little-finger knuckle

TPU hard shell palm slider

TPU hard shell thumb protector
Outer shell material:
Drum-dyed stay soft goatskin leather

Hypalon

Inside out goat suede

Leather Connect Finger Tip

PU grip

PU (polyurethane) coated fabric

PWR|4-way stretch

PWR|Shell ripstop stretch
Visibility:
laminated reflection at cuff

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! LONDON LADIES JACKET - AUBERGINE

$ 10,453.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

A design-centric, full-leather, women’s jacket engineered to stand the tests of time

For the fashionable urbanite who appreciates life both behind the handlebars or off the bike, let the London Ladies jacket meet your acquaintance. At first glance The London Ladies jacket is all about feminine appeal, and that’s apparent at first glance. Its sleek design was meant to look just as good while riding or while using it as a fashionable statement while walking around. With topstitching accents throughout, a ventilated panel behind the front zipper, and stretch lips at the back for improved movement, this eye-catching silhouette is perfect for riding to your next destination—or not!—and has the DNA of a city-centric jacket that transcends boundaries. With included SEESMART shoulder and elbow armor, of course. An optional back protector is also available. About the fit The black* color offering comes with a chunky, metal silver zipper and is made of sheep leather. Upon first touch, you’ll notice its suppleness and softness. And when you slip it on for the first time, you’re wrapped in comfort. It will immediately start adapting to your body and will feel like a lightweight second skin. While it is meant to have a regular fit, it has been patterned in a way that allows for give in places like the bust and the waist; ensuring women of various body shapes can look their best. *For the bitter chocolate color variation, we use sheep and goat nubuck leather instead of full sheep leather (which is what is used in the black version). Furthermore, it’s the first time in our collection’s history that we have paired a jacket with bright gold metal zippers.

Comfort features

Pockets:
Inner pocket

Two slit pockets on front
Lining:
3D mesh

Polyester stretch

Soft spacer mesh
Features:
Cuff zipper

Jeans loop

Short connection zipper

Stretch lips at back

Wind collar tab

Climate features

Insulation:
Wind catcher behind cuff zipper

Wind catcher behind front zipper
Ventilation:
Ventilation panel behind center front zipper

Protection features

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

Customer Reviews

No reviews yet Write a review

REV'IT! LONDON LADIES JACKET - AUBERGINE

REV'IT! LONDON LADIES JACKET - BLACK

$ 10,453.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

A design-centric, full-leather, women’s jacket engineered to stand the tests of time

For the fashionable urbanite who appreciates life both behind the handlebars or off the bike, let the London Ladies jacket meet your acquaintance. At first glance The London Ladies jacket is all about feminine appeal, and that’s apparent at first glance. Its sleek design was meant to look just as good while riding or while using it as a fashionable statement while walking around. With topstitching accents throughout, a ventilated panel behind the front zipper, and stretch lips at the back for improved movement, this eye-catching silhouette is perfect for riding to your next destination—or not!—and has the DNA of a city-centric jacket that transcends boundaries. With included SEESMART shoulder and elbow armor, of course. An optional back protector is also available. About the fit The black* color offering comes with a chunky, metal silver zipper and is made of sheep leather. Upon first touch, you’ll notice its suppleness and softness. And when you slip it on for the first time, you’re wrapped in comfort. It will immediately start adapting to your body and will feel like a lightweight second skin. While it is meant to have a regular fit, it has been patterned in a way that allows for give in places like the bust and the waist; ensuring women of various body shapes can look their best. *For the bitter chocolate color variation, we use sheep and goat nubuck leather instead of full sheep leather (which is what is used in the black version). Furthermore, it’s the first time in our collection’s history that we have paired a jacket with bright gold metal zippers.

Comfort features

Pockets:
Inner pocket

Two slit pockets on front
Lining:
3D mesh

Polyester stretch

Soft spacer mesh
Features:
Cuff zipper

Jeans loop

Short connection zipper

Stretch lips at back

Wind collar tab

Climate features

Insulation:
Wind catcher behind cuff zipper

Wind catcher behind front zipper
Ventilation:
Ventilation panel behind center front zipper

Protection features

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

Customer Reviews

No reviews yet Write a review

REV'IT! AUTOMATE JACKET - BLACK-NEON RED

$ 10,743.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Sportive, multi-season leather jacket for riding in dry weather.

The Automate Jacket seamlessly integrates a rational design approach with creative vision, resulting in a high-performance garment that excels in both style and functionality for long-distance sportive riding. The foundation Created with a mix of materials, the combination of 3D mesh panels, perforated leather, and laser perforations maximizes airflow, providing excellent ventilation for warmer rides. When things cool down, its detachable body warmer helps to keep the chest at a comfortable temperature. Sport flair To make the Automate jacket immediately recognizable, we played with various shades of the same hue to create a shadow-type effect; for example, a bright red placed beside a darker red – across the chest. Furthermore, newly developed shoulder parts not only add to comfort but also enhance the jacket's aerodynamic aesthetic, aligning seamlessly with modern Adventure Sport motorcycles. Sport fit. Comfortable feel. A sport/tight fit sometimes can come at a cost. Not with the Automate jacket. Side stretch panels have been included along with stretch at the shoulders. Move freely regardless. Furthermore, hook-and-loop adjustments at the waist allow riders to personalize the jacket’s fit even more. And neoprene in the collar ensures a comfortable fit around the neck, contributing to an overall enhanced wearing experience.

Comfort features

Adjustability:
Adjustment strap at waist
Pockets:
Inner napoleon pocket

Slit pocket at waist

Three inner pockets
Lining:
Mesh

Polyester ripstop

Soft spacer mesh
Features:
Comfort cuffs

Cuff zipper

Jeans loop

Long connection zipper

Short connection zipper

Soft edge at collar

Stretchable cuff

Stretch at armholes

Stretch at inside arms

Stretch at shoulders

Stretch panel at sides

Climate features

Insulation:
Detachable thermal body warmer

Wind catcher behind cuff zipper

Wind catcher behind front zipper
Ventilation:
Perforation on upper back

Perforation on upper front

Ventilation panels at lower back

Ventilation panels on lower front

Ventilation panels on upper arms

Protection features

Protection:
Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector

Prepared for SEESOFT CE-level 2 Insert Back Protector

Ready for Avertum Tech-Air® airbag system - ONE SIZE UP

Safety seams

SEEFLEX CE-level 2 Elbow Protectors

SEEFLEX CE-level 2 Shoulder Protectors

TPU protection at shoulder
Outer shell material:
3D air mesh

Artificial Leather

cowhide

Perforated cowhide

PWR|Shell stretch
Visibility:
Laminated reflection on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

REV'IT! AUTOMATE JACKET - BLACK-NEON RED

REV'IT! SAND 5 LADIES GLOVES - BLACK

$ 2,033.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Short-cuffed, female-specific, ventilated travel gloves for adventurous riders

Although the Sand 5 Ladies have been designed to complement the Sand 5 H2O Ladies outfit, these lightweight and breathable gloves have also become the go-to gloves for a large audience of female adventure riders across the globe. The next step As with every evolution of a staple product in our collection, there are certain aspects that we like to zoom in on and improve yet leave other characteristics like functionality and purpose untouched. With the Sand 5 Ladies gloves, that was fit and comfort. As one of the top-selling gloves in our collection, we already knew we had a winning formula. We just wanted to make it even better. A balanced recipe A short cuff along with a combination of leather and 3D air mesh make up the majority of the Sand 5 Ladies gloves’ composition. We then match it with top-tier features like a new TPR injected knuckle protector that allows for even more dexterity and flexibility, TPU thumb and palm protection, a TPR little finger protector, wrist bone protection, a tri-fleece lining (for added comfort), Goat stay-soft leather and a grip panel on the inside of the hand, and much more. The Sand name has a legacy to uphold, and this generation does their predecessors proud.

Comfort features

Adjustability:
Adjustment tab at cuff

Stretch at fingers

Stretch at thumb

Stretch fabric on back of hand

Stretch lips at fingers
Closure:
elastic at wrist

Hook-and-loop closure
Lining:
Tri-fleece liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Grip patch at thumb

Pull tab

Short cuff

Climate features

Ventilation:
Fully ventilated 3D air mesh

Ventilation holes

Protection features

Protection:
PWR|Yarn

Temperfoam® at cuff

Temperfoam® underneath knuckle protector

Temperfoam® underneath protectors

TPR injected finger knuckle protectors

TPR injected knuckle

TPR little-finger knuckle

TPU hard shell palm slider

TPU hard shell thumb protector
Outer shell material:
3D air mesh

Drum-dyed stay soft goatskin leather

Hypalon

Inside out goat suede

Leather Connect Finger Tip

Ottoman stretch

PU grip

PU (polyurethane) coated fabric

PWR|4-way stretch

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! SAND 5 GLOVES - SAND-BLACK

$ 2,033.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Short-cuffed, ventilated travel gloves for adventurous riders

Although the Sand 5 gloves have been designed to complement the Sand 5 H2O outfit, these lightweight and breathable gloves have also become the go-to gloves for a large audience of adventure riders across the globe. The next step As with every evolution of a staple product in our collection, there are certain aspects that we like to zoom in on and improve yet leave other characteristics like functionality and purpose untouched. With the Sand 5 gloves, that was fit and comfort. As one of the top-selling gloves in our collection, we already knew we had a winning recipe. We just wanted to make it even better. A balanced recipe A short cuff along with a combination of leather and 3D air mesh make up the majority of the Sand 5 gloves’ composition. We then match it with top-tier features like a new TPR injected knuckle protector that allows for even more dexterity and flexibility, TPU thumb and palm protection, a TPR little finger protector, wrist bone protection, a tri-fleece lining (for added comfort), goat stay-soft leather and a grip panel on the inside of the hand, and much more. The Sand name has a legacy to uphold, and this generation does their predecessors proud.

Comfort features

Adjustability:
Adjustment tab at cuff

Stretch at fingers

Stretch at thumb

Stretch fabric on back of hand

Stretch lips at fingers
Closure:
elastic at wrist

Hook-and-loop closure
Lining:
Tri-fleece liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Grip patch at thumb

Pull tab

Short cuff

Climate features

Ventilation:
Fully ventilated 3D air mesh

Ventilation holes

Protection features

Protection:
PWR|Yarn

Temperfoam® at cuff

Temperfoam® underneath knuckle protector

Temperfoam® underneath protectors

TPR injected finger knuckle protectors

TPR injected knuckle

TPR little-finger knuckle

TPU hard shell palm slider

TPU hard shell thumb protector
Outer shell material:
3D air mesh

Drum-dyed stay soft goatskin leather

Hypalon

Inside out goat suede

Leather Connect Finger Tip

Ottoman stretch

PU grip

PU (polyurethane) coated fabric

PWR|4-way stretch

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! SAND 5 GLOVES - BLACK

$ 2,033.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Short-cuffed, ventilated travel gloves for adventurous riders

Although the Sand 5 gloves have been designed to complement the Sand 5 H2O outfit, these lightweight and breathable gloves have also become the go-to gloves for a large audience of adventure riders across the globe. The next step As with every evolution of a staple product in our collection, there are certain aspects that we like to zoom in on and improve yet leave other characteristics like functionality and purpose untouched. With the Sand 5 gloves, that was fit and comfort. As one of the top-selling gloves in our collection, we already knew we had a winning recipe. We just wanted to make it even better. A balanced recipe A short cuff along with a combination of leather and 3D air mesh make up the majority of the Sand 5 gloves’ composition. We then match it with top-tier features like a new TPR injected knuckle protector that allows for even more dexterity and flexibility, TPU thumb and palm protection, a TPR little finger protector, wrist bone protection, a tri-fleece lining (for added comfort), goat stay-soft leather and a grip panel on the inside of the hand, and much more. The Sand name has a legacy to uphold, and this generation does their predecessors proud.

Comfort features

Adjustability:
Adjustment tab at cuff

Stretch at fingers

Stretch at thumb

Stretch fabric on back of hand

Stretch lips at fingers
Closure:
elastic at wrist

Hook-and-loop closure
Lining:
Tri-fleece liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Grip patch at thumb

Pull tab

Short cuff

Climate features

Ventilation:
Fully ventilated 3D air mesh

Ventilation holes

Protection features

Protection:
PWR|Yarn

Temperfoam® at cuff

Temperfoam® underneath knuckle protector

Temperfoam® underneath protectors

TPR injected finger knuckle protectors

TPR injected knuckle

TPR little-finger knuckle

TPU hard shell palm slider

TPU hard shell thumb protector
Outer shell material:
3D air mesh

Drum-dyed stay soft goatskin leather

Hypalon

Inside out goat suede

Leather Connect Finger Tip

Ottoman stretch

PU grip

PU (polyurethane) coated fabric

PWR|4-way stretch

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! REDHILL GLOVES - WHITE-BLACK

$ 2,178.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Retro-look, leather gloves for summer riding in style

High-quality leathers like goatskin, water-repellent suede, and cowhide provide the backdrop to unapologetically old-school block printing on these stylish, summer gloves. To upgrade the original, we added airflow details like perforated, drum-dyed goatskin leather between the finger seams to help keep your hands nice and cool. Hold onto your handlebars Vintage vibes meet top-spec technical performance in the Redhill. After all, suede isn’t just for blue shoes – these gloves use the extra grip of a brushed finish on the leather to reinforce pads on the palms and inner thumbs. Combined with a water-repellent finish to give a coarser texture, at these vital contact points you’re guaranteed a tougher, more tactile feel. All-action esthetics The look might take you back in time, but the protection on these gloves is cutting-edge. Compact Temperfoam® stepping into the spotlight where fit and dexterity are paramount. Renowned for its impact-absorbing, self-contouring properties, this top-spec, technical material is used to optimum effect in the lining of the hard-shell armor at the knuckles, fingers, and palms.

COMFORT FEATURES

Adjustability:
Adjustment tab at cuff

Stretch lips at fingers

Stretch lips at upper hand
Closure:
elastic at wrist

Hook-and-loop closure
Lining:
Tricot liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Grip patch at thumb

Short cuff

CLIMATE FEATURES

Ventilation:
Perforated leather

PROTECTION FEATURES

Protection:
Hard shell knuckle

PWR|Shield at palm

Temperfoam® finger knuckles

Temperfoam® palm slider

Temperfoam® underneath knuckle protector
Outer shell material:
cowhide

Drum-dyed goatskin leather

Leather Connect Finger Tip

Perforated, drum-dyed goatskin leather

Suede leather with WR finish

REV'IT! NEW HEIGHTS LADIES GLOVES - BLACK

$ 1,888.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Short-cuffed, comfort-focused, female-fit, perforated, full-leather gloves.

The blend of extreme comfort, superior ventilation, and top-notch protection ensures that the New Heights Ladies gloves can soar when you’re out enjoying life on two wheels in warm weather. Focus on comfort When you slip your hands into the New Heights Ladies gloves, you’ll notice right away that the comfort level is through the roof. It was designed that way, specifically for women’s hands. Created with Goat soft leather, fingers can effortlessly grip the handlebars and move around thanks to the flexible nature of the materialization. More ventilation The ventilation factor on the New Heights Ladies gloves is, as the name suggests, high! With a fully perforated back of the hand—except where the protectors are—and perforation at the tops and sides of fingers, along with perforation at the palm, hands can feel the breeze with ease when riding. The protective element Incorporated protection comes in the form of the new knuckle styling (a hard knuckle is coupled with the New Heights Ladies gloves), along with finger protectors, and a Temperfoam® palm slider laced with PWR|Shield.

Comfort features

Adjustability:
Adjustment tab at cuff

Stretch lips at fingers
Closure:
Hook-and-loop closure
Lining:
Tri-fleece liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Grip patch at thumb

Short cuff

Climate features

Ventilation:
Ventilation holes

Protection features

Protection:
Hard shell knuckle

PU finger knuckles

PWR|Shield at palm

Temperfoam® finger knuckles

Temperfoam® palm slider

Temperfoam® underneath knuckle protector
Outer shell material:
Drum-dyed stay soft goatskin leather

Karvin cowhide (PU coated)

Leather Connect Finger Tip

Ottoman stretch

Perforated, drum-dyed stay soft goatskin leather

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! NEW HEIGHTS LADIES GLOVES - BLACK

REV'IT! NEW HEIGHTS GLOVES - BROWN-BLACK

$ 1,888.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Short-cuffed, comfort-focused, perforated, full-leather gloves.

The blend of extreme comfort, ample ventilation, and top-notch protection ensures that the New Heights gloves can soar when you’re out enjoying life on two wheels in warm weather. Focus on comfort When you slip your hands into the New Heights gloves, you’ll notice right away that the comfort level is through the roof. It was designed that way. Created with Goat soft leather, fingers can effortlessly grip the handlebars and move around thanks to the flexible nature of the materialization. More ventilation The ventilation factor on the New Heights gloves is, as the name suggests, high! With a fully perforated back of the hand—except where the protectors are—and perforation at the tops and sides of fingers, along with perforation at the palm, hands can feel the breeze with ease when riding. The protective element Incorporated protection comes in the form of the new knuckle styling (a hard knuckle is coupled with the New Heights gloves), along with finger protectors, and a Temperfoam® palm slider laced with PWR|Shield.

Comfort features

Adjustability:
Adjustment tab at cuff

Stretch lips at fingers
Closure:
Hook-and-loop closure
Lining:
Tri-fleece liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Grip patch at thumb

Short cuff

Climate features

Ventilation:
Ventilation holes

Protection features

Protection:
Hard shell knuckle

PU finger knuckles

PWR|Shield at palm

Temperfoam® finger knuckles

Temperfoam® palm slider

Temperfoam® underneath knuckle protector
Outer shell material:
Drum-dyed stay soft goatskin leather

Karvin cowhide (PU coated)

Leather Connect Finger Tip

Ottoman stretch

Perforated, drum-dyed stay soft goatskin leather

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! NEW HEIGHTS GLOVES - BROWN-BLACK

REV'IT! NEW HEIGHTS GLOVES - BLACK

$ 1,888.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Short-cuffed, comfort-focused, perforated, full-leather gloves.

The blend of extreme comfort, ample ventilation, and top-notch protection ensures that the New Heights gloves can soar when you’re out enjoying life on two wheels in warm weather. Focus on comfort When you slip your hands into the New Heights gloves, you’ll notice right away that the comfort level is through the roof. It was designed that way. Created with Goat soft leather, fingers can effortlessly grip the handlebars and move around thanks to the flexible nature of the materialization. More ventilation The ventilation factor on the New Heights gloves is, as the name suggests, high! With a fully perforated back of the hand—except where the protectors are—and perforation at the tops and sides of fingers, along with perforation at the palm, hands can feel the breeze with ease when riding. The protective element Incorporated protection comes in the form of the new knuckle styling (a hard knuckle is coupled with the New Heights gloves), along with finger protectors, and a Temperfoam® palm slider laced with PWR|Shield.

Comfort features

Adjustability:
Adjustment tab at cuff

Stretch lips at fingers
Closure:
Hook-and-loop closure
Lining:
Tri-fleece liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Grip patch at thumb

Short cuff

Climate features

Ventilation:
Ventilation holes

Protection features

Protection:
Hard shell knuckle

PU finger knuckles

PWR|Shield at palm

Temperfoam® finger knuckles

Temperfoam® palm slider

Temperfoam® underneath knuckle protector
Outer shell material:
Drum-dyed stay soft goatskin leather

Karvin cowhide (PU coated)

Leather Connect Finger Tip

Ottoman stretch

Perforated, drum-dyed stay soft goatskin leather

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! MOSCA 2 GLOVES - GREEN-BLACK

$ 1,162.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Short-cuffed, ventilated, entry-level riding gloves

When ventilation is the key to staying in control on sizzling days atop your bike, look no further than the summer ready Mosca 2 gloves. Feeling the breeze When riding on a hot day, you’ll experience full ventilation at the back of the hand while the palm has partial ventilation, along with drum dyed goatskin for additional comfort. Easy ergonomics A short cuff, 4-way stretch, a pull tab, and a hook-and-loop closure mixed together means getting your hands in and out of the Mosca 2 gloves couldn’t be easier. Not to mention the incorporation of the new 3D SEESOFT knuckle further adds to rider comfort thanks to its ergonomic design. The tech to keep hands safe The OrthoLite® foam incorporated at the fingers and palm that has a better open-cell structure that also offers increased impact protection while keeping the comfort level at a maximum. So get out, even on the hottest day and help keep your hands cool and under control.

Comfort features

Adjustability:
Adjustment tab at cuff

Stretch lips at fingers
Closure:
Hook-and-loop closure
Lining:
Tricot liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Pull tab

Short cuff

Climate features

Ventilation:
Fully ventilated fabric

Ventilation holes

Protection features

Protection:
Memory foam underneath knuckle protector

Ortholite® UltraLite comfort foam at fingers

OrthoLite® UltraLite comfort foam at palm

SEESOFT 3D knuckle
Outer shell material:
4-way stretch

goatskin drum dyed with WR finish

microfiber e-touch

Ottoman stretch

PU (polyurethane) coated fabric

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! MOSCA 2 GLOVES - DARK BLUE-BLACK

$ 1,162.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Short-cuffed, ventilated, entry-level riding gloves

When ventilation is the key to staying in control on sizzling days atop your bike, look no further than the summer ready Mosca 2 gloves. Feeling the breeze When riding on a hot day, you’ll experience full ventilation at the back of the hand while the palm has partial ventilation, along with drum dyed goatskin for additional comfort. Easy ergonomics A short cuff, 4-way stretch, a pull tab, and a hook-and-loop closure mixed together means getting your hands in and out of the Mosca 2 gloves couldn’t be easier. Not to mention the incorporation of the new 3D SEESOFT knuckle further adds to rider comfort thanks to its ergonomic design. The tech to keep hands safe The OrthoLite® foam incorporated at the fingers and palm that has a better open-cell structure that also offers increased impact protection while keeping the comfort level at a maximum. So get out, even on the hottest day and help keep your hands cool and under control.

Comfort features

Adjustability:
Adjustment tab at cuff

Stretch lips at fingers
Closure:
Hook-and-loop closure
Lining:
Tricot liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Pull tab

Short cuff

Climate features

Ventilation:
Fully ventilated fabric

Ventilation holes

Protection features

Protection:
Memory foam underneath knuckle protector

Ortholite® UltraLite comfort foam at fingers

OrthoLite® UltraLite comfort foam at palm

SEESOFT 3D knuckle
Outer shell material:
4-way stretch

goatskin drum dyed with WR finish

microfiber e-touch

Ottoman stretch

PU (polyurethane) coated fabric

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! MOSCA 2 GLOVES - DARK BLUE-BLACK

REV'IT! CAVERN LADIES GLOVES - SAND-BLACK

$ 1,380.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Highly ventilated, short-cuffed, female-specific gloves for two-wheeled travelers.

For the days when the warm wind is blowing and you need comfortable and ventilating hand protection, the Cavern Ladies gloves are ready to go on that adventure with you. Ventilation at hand For the short-cuffed, female-specific Cavern Ladies Adventure Travel gloves, we use a combination of 3D air mesh along with microfiber, to let the air in but also to let your hands breathe with ease when on the handlebars. Perforation on the inside of the hand panels also supports the cooling efforts. And as an extra touch of flair, debossing is found on the inside of the hand. Soft yet safe Part of the appeal of having gloves with less rigid parts is comfort. But not at the expense of safety, of course. We use stretch between the fingers for added dexterity but also armor them. Memory foam thumb protection is included, along with a SEESOFT knuckle, middle and ring finger protection, and OrthoLite® Ultralite foam wrist and palm protection.

Comfort features

Adjustability:
Adjustment tab at cuff

Stretch at fingers

Stretch lips at fingers
Closure:
elastic at wrist

Hook-and-loop closure
Lining:
Tri-fleece liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Grip patch at thumb

Outseam stitching

Short cuff

Climate features

Ventilation:
Fully ventilated 3D air mesh

Ventilation holes

Protection features

Protection:
Memory foam at fingers

Memory foam at thumb

Memory foam underneath knuckle protector

OrthoLite® UltraLite comfort foam at palm

PWR|Shield at palm

SEESOFT 3D knuckle

TPR injected finger knuckle protectors
Outer shell material:
3D air mesh

microfiber e-touch

Ottoman stretch

PU (polyurethane) coated fabric

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! CAVERN LADIES GLOVES - SAND-BLACK

REV'IT! CAVERN GLOVES - SAND-BLACK

$ 1,380.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Highly ventilated, short-cuffed, comfortable gloves for two-wheeled travelers.

For the days when the warm wind is blowing and you need comfortable and ventilating hand protection, the Cavern gloves are ready to go on that adventure with you. Ventilation at hand For the short-cuffed Cavern Adventure Travel gloves, we use a combination of 3D air mesh along with microfiber, to let the air in but also to let your hands breathe with ease when on the handlebars. Perforation on the inside of the hand panels also supports the cooling efforts. And as an extra touch of flair, debossing is found on the inside of the hand. Soft yet safe Part of the appeal of having gloves with less rigid parts is comfort. But not at the expense of safety, of course. We use stretch between the fingers for added dexterity but also armor them. Memory foam thumb protection is included, along with a SEESOFT knuckle, middle and ring finger protection, and OrthoLite® Ultralite foam wrist and palm protection.

Comfort features

Adjustability:
Adjustment tab at cuff

Stretch at fingers

Stretch lips at fingers
Closure:
elastic at wrist

Hook-and-loop closure
Lining:
Tri-fleece liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Grip patch at thumb

Outseam stitching

Short cuff

Climate features

Ventilation:
Fully ventilated 3D air mesh

Ventilation holes

Protection features

Protection:
Memory foam at fingers

Memory foam at thumb

Memory foam underneath knuckle protector

OrthoLite® UltraLite comfort foam at palm

PWR|Shield at palm

SEESOFT 3D knuckle

TPR injected finger knuckle protectors
Outer shell material:
3D air mesh

microfiber e-touch

Ottoman stretch

PU (polyurethane) coated fabric

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! CAVERN GLOVES - BLACK

$ 1,380.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Highly ventilated, short-cuffed, comfortable gloves for two-wheeled travelers.

For the days when the warm wind is blowing and you need comfortable and ventilating hand protection, the Cavern gloves are ready to go on that adventure with you. Ventilation at hand For the short-cuffed Cavern Adventure Travel gloves, we use a combination of 3D air mesh along with microfiber, to let the air in but also to let your hands breathe with ease when on the handlebars. Perforation on the inside of the hand panels also supports the cooling efforts. And as an extra touch of flair, debossing is found on the inside of the hand. Soft yet safe Part of the appeal of having gloves with less rigid parts is comfort. But not at the expense of safety, of course. We use stretch between the fingers for added dexterity but also armor them. Memory foam thumb protection is included, along with a SEESOFT knuckle, middle and ring finger protection, and OrthoLite® Ultralite foam wrist and palm protection.

Comfort features

Adjustability:
Adjustment tab at cuff

Stretch at fingers

Stretch lips at fingers
Closure:
elastic at wrist

Hook-and-loop closure
Lining:
Tri-fleece liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Grip patch at thumb

Outseam stitching

Short cuff

Climate features

Ventilation:
Fully ventilated 3D air mesh

Ventilation holes

Protection features

Protection:
Memory foam at fingers

Memory foam at thumb

Memory foam underneath knuckle protector

OrthoLite® UltraLite comfort foam at palm

PWR|Shield at palm

SEESOFT 3D knuckle

TPR injected finger knuckle protectors
Outer shell material:
3D air mesh

microfiber e-touch

Ottoman stretch

PU (polyurethane) coated fabric

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! DAVIS 2 WORKER RF PANTS (REGULAR FIT) PANTS - BLACK

$ 4,356.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada

Protective, worker-inspired pants for the fashionable urban rider.

A take on the classic worker-inspired pants but road-ready for style-conscious riders. Ger ready with the Davis 2. A motorcycling twist of a classic We took the Davis 2 Regular worker pants and built further upon the archetype so widely recognized, and on a style that resonated well with the riding community. Those details include slanted front pockets and large pockets at the back. We also added an extra front pocket intake that allows you to keep your phone close, reducing the risk of it falling out since it sits deeper in the pants. Their construction Engineered with CORDURA® Twill, the Davis 2 Regular worker pants were created for comfort. They also offer tear and abrasion resistance to help keep you safe on the road. Reflective tape at the turn-up allows riders to be better seen when visibility conditions aren’t at their best.

Comfort features

Adjustability:
Adjustable knee protection
Closure:
zip fly front closure
Pockets:
Phone pocket

Two back pockets on back

Two pockets on front
Features:
Belt loops

Climate features

Protection features

Protection:
Prepared for SEESMART RV33 CE-level 1 Insert Hip Protectors

Safety seams

SEESMART CE-level 1 Knee Protectors

Triple needle stitching
Outer shell material:
14oz CORDURA® stretch twill
Visibility:
Reflection at turn up

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved A rating

REV'IT! DAVIS 2 WORKER RF PANTS (REGULAR FIT) PANTS - BLACK

REV'IT! HARPER TF (TAPERED FIT) LADIES JEANS - DARK BLUE USED

$ 4,791.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Tapered fit, Female-specific, AAA safety rated casual riding jeans

The ability to create a top-level, AAA safety-rated yet fashionable and comfortable pair of jeans wasn’t an easy one, but we’re not one to shy away from a challenge. Introducing the Harper Tapered Ladies jeans. Style at the forefront Upon first glance, the Harper Tapered Ladies jeans look like your typical, fashionable, 5-pocket jeans. Then you start to discover that they’re so much more than that. With a mid-waist and a beautiful wash, you’re road-ready at a moment’s notice. On the move With its tapered fit style (wider in the upper legs and then narrowing down from the knee to the hem), the Harper Tapered Ladies jeans are constructed of sturdy yet flexible 16oz. CORDURA® stretch denim. This allows maximum freedom of movement whether you’re behind the handlebars or heading into your favorite meetup spot. Safety woven in With PWR|Shield reinforcements at the hips, seat, and knees, along with SEESMART protectors at the hips and knees, that’s how we’re able to achieve the highest safety certification level for PPE in the category. The Harper Tapered Ladies jeans are also the first jeans we offer female riders with a safety rating of AAA - something we're actualy quite proud of.

Comfort features

Adjustability:
Adjustable knee protection
Closure:
zip fly front closure
Pockets:
Five-pocket jeans
Features:
Belt loops

Climate features

Protection features

Protection:
Double layer of PWR|Shield at hips

Double layer of PWR|Shield at knees

Double layer of PWR|Shield at seat

Safety seams

SEESMART CE-level 1 Hip Protectors

SEESMART CE-level 1 Knee Protectors

Triple needle stitching
Outer shell material:
16oz Cordura® denim
Visibility:
Reflection at turn up

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AAA rating.

REV'IT! HARPER TF (TAPERED FIT) LADIES JEANS - DARK BLUE USED

REV'IT! DEAN 2 TF (TAPERED FIT) CHINO - SAND

$ 4,356.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada

Protective riding chinos for the fashionable urban rider.

Dress to impress with the Dean 2 Tapered chinos. A non-denim offering in our riding trousers range. A classic We took the Dean 2 Tapered chinos and built further upon the archetype so widely recognized, and on a style that resonated well with the riding community. Those details include slanted front pockets and welt pockets at the back. We also added an extra front pocket intake that allows you to keep your phone close, reducing the risk of it falling out since it sits deeper in the chinos. Their construction Engineered with CORDURA® Twill, the Dean 2 Tapered chinos were created for comfort. They also offer tear and abrasion resistance to help keep you safe on the road. Reflective tape at the turn up allows riders to be better seen when visibility conditions aren’t at their best. In terms of colorways, they come in a lighter or darker neutral hue so they can easily be combined with almost any item from your wardrobe.

Comfort features

Adjustability:
Adjustable knee protection
Closure:
zip fly front closure
Pockets:
Phone pocket

Two pockets on front

Two welt pockets at back
Features:
Belt loops

Climate features

Protection features

Protection:
Prepared for SEESMART RV33 CE-level 1 Insert Hip Protectors

Safety seams

SEESMART CE-level 1 Knee Protectors

Triple needle stitching
Outer shell material:
14oz CORDURA® stretch twill
Visibility:
Reflection at turn up

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved A rating.

REV'IT! DEAN 2 TF (TAPERED FIT) CHINO - SAND

REV'IT! DEAN 2 TF (TAPERED FIT) CHINO - BLACK

$ 4,356.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada

Protective riding chinos for the fashionable urban rider.

Dress to impress with the Dean 2 Tapered chinos. A non-denim offering in our riding trousers range. A classic We took the Dean 2 Tapered chinos and built further upon the archetype so widely recognized, and on a style that resonated well with the riding community. Those details include slanted front pockets and welt pockets at the back. We also added an extra front pocket intake that allows you to keep your phone close, reducing the risk of it falling out since it sits deeper in the chinos. Their construction Engineered with CORDURA® Twill, the Dean 2 Tapered chinos were created for comfort. They also offer tear and abrasion resistance to help keep you safe on the road. Reflective tape at the turn up allows riders to be better seen when visibility conditions aren’t at their best. In terms of colorways, they come in a lighter or darker neutral hue so they can easily be combined with almost any item from your wardrobe.

Comfort features

Adjustability:
Adjustable knee protection
Closure:
zip fly front closure
Pockets:
Phone pocket

Two pockets on front

Two welt pockets at back
Features:
Belt loops

Climate features

Protection features

Protection:
Prepared for SEESMART RV33 CE-level 1 Insert Hip Protectors

Safety seams

SEESMART CE-level 1 Knee Protectors

Triple needle stitching
Outer shell material:
14oz CORDURA® stretch twill
Visibility:
Reflection at turn up

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved A rating.

REV'IT! DEAN 2 TF (TAPERED FIT) CHINO - BLACK

REV'IT! KICK SHOES - BLACK

$ 3,920.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Skateboard scene-inspired, suede sneakers with SEESOFT protection

At the intersection where motorcycle riders and skateboarders meet, all the signs point to the Kick. The harmonious design of these motorcycle sneakers incorporates innovations in performance from both worlds to construct these highly capable high-tops. With features like the squared-off soles for edge-to-edge grip and the inconspicuous reinforcement for impact resistance shoes could be right up your street.

Different strokes
As anyone who’s ever been a rider or a skater would concur – and speak from experience – things often don’t go to plan. If it all kicks off, the SEESOFT ankle disc protection that’s built into these shoes steps in, with its injected ankle disc armor safeguarding your high-risk zones – it ups the impact resistance without compromising your comfort due to its contouring curves.

Back to the future
Design is about understanding the challenges we face and then engineering solutions. With all eyes on the future, REV’IT! is committed to developing products that minimize our carbon footprint and preserve our planet’s precious resources. So, the hybrid foam footbed comprises 20% recycled materials, yet it offers the exact same rebound and damping performance as previous designs. It’s also good to know we’ve used a polyurethane alternative on the upper, while the suede is oiled and waxed for long-lasting durability

REV'IT! VOLTIAC H20 JACKET - GREEN-ANTHRACITE

$ 5,517.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Multi-season jacket with thermal and waterproof liners.

Product description

This jacket’s previous generations are the epitome of affordable, capable, all-weather touring gear. And when the going gets tough, the Voltiac 3 H2O stays true to its roots. Only now it’s upgraded with PWR|Ripstop fabric on the shoulder, elbow, and forearm areas, plus an outer shell construction in 600-denier polyester that’s form-fitting and more than tough enough to withstand the elements. Switch seasons You’ll never be caught out by the weather in the Voltiac 3 H2O. The hydratex|Sphere mesh G-liner is waterproof yet breathable. The thermal liner will keep you cozy during most seasons, while two ventilation zippers are sealed to avoid water ingress and open the full length of your chest to optimize airflow when required. Warm, cold, wind, rain, or shine, in the Voltiac you’ll adjust just fine. Protection you can trust We could talk about motorcycle jackets all day long – and we often do. But it’s the people wearing them who matter the most. When designing and developing an affordable jacket, there is no compromise, and you can expect the same level of protection and upgrade options as with our top-of-the-range REV’IT! jackets – SEESMART CE-Level 1 at the shoulders and elbows, plus an insert for an optional SEESOFT CE-Level 2 back protector.

Comfort features

Adjustability:
Adjustment drawcord at hem

Adjustment strap at waist

Adjustment tab at cuffs

Adjustment tab at upper arm

Flexisnap at collar
Pockets:
Inner pocket within thermal liner

Slit pocket at chest

Two hand warmer pockets

Two stash pockets at front
Features:
Short connection zipper

Soft edge at collar

Two-way Collar Snap Closure System

V-flap at cuff

Climate features

Waterproofing:
hydratex|Mesh G-liner
Insulation:
Detachable thermal liner
Ventilation:
Air outlet on upper back

Zippers on chest

Protection features

Protection:
Prepared for SEESOFT CE-level 2 Insert Back Protector

Ready for Avertum Tech-Air® airbag system - ONE SIZE UP

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors
Outer shell material:
Polyester 600D

Polyester ripstop
Visibility:
Laminated reflection at chest

Laminated reflection at lower arms

Laminated reflection on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved A rating

REV'IT! VOLTIAC H20 JACKET - GREEN-ANTHRACITE

REV'IT! HASTE H20 JACKET - BLACK-BLUE

$ 6,533.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Hooded, waterproof textile jacket that sets you apart from the rest.

Product description

Meet the waterproof jacket installment of the REV’IT! Ninety-Five Capsule collection. A bold choice that keeps you dry when you ride in the rain. Setting it apart The Haste H2O jacket has a vintage vibe with a modern twist. We achieve this by incorporating loud and bold patches and colors against a color-blocked canvas. The retro-inspired bolts of lightning with blasts of bright hues can’t be missed on the inside liner. But on the front chest and the large back panel, race-inspired laminated prints including RV95 - the year of REV’IT!’s birth, 1995 -, #thefuturebelongstous, and our Shield logo, make it immediately recognizable as something that sets it apart from the rest of the collection. You’ll also notice the text, “Ready and willing to ignite,” because that’s what we are and that’s what this jacket does. It’s ready to play. Convenience features Because the Haste has the “H2O” designation, that means we’ve included a shield against the rain. By incorporating the hydratex|Mesh G-liner construction, you can ride in the rain without a second thought. You can even ride when it’s chillier out thanks to the inclusion of the detachable thermal liner. Conveniently take it out when temperatures warm up. Furthermore, we’ve included a detachable snap-button hood, so if you prefer to ride without it, that’s entirely up to you.

Comfort features

Adjustability:
Adjustment strap at waist

Adjustment tab at cuffs
Pockets:
Two inner pockets

Two pockets on front
Features:
Detachable hood

Jeans loop

Short connection zipper

Wind catcher behind front zipper

Climate features

Waterproofing:
hydratex|Mesh G-liner
Insulation:
Detachable thermal liner

Wind catcher behind front zipper

Protection features

Protection:
3D mesh protector pockets

Prepared for SEESOFT CE-level 2 Insert Back Protector

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors
Outer shell material:
Polyester stretch

ripstop 600D

Softshell 3L
Visibility:
Laminated reflection at upper arms

Laminated reflection on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! HASTE H20 JACKET - BLACK-RED

$ 6,533.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Hooded, waterproof textile jacket that sets you apart from the rest.

Product description

Meet the waterproof jacket installment of the REV’IT! Ninety-Five Capsule collection. A bold choice that keeps you dry when you ride in the rain. Setting it apart The Haste H2O jacket has a vintage vibe with a modern twist. We achieve this by incorporating loud and bold patches and colors against a color-blocked canvas. The retro-inspired bolts of lightning with blasts of bright hues can’t be missed on the inside liner. But on the front chest and the large back panel, race-inspired laminated prints including RV95 - the year of REV’IT!’s birth, 1995 -, #thefuturebelongstous, and our Shield logo, make it immediately recognizable as something that sets it apart from the rest of the collection. You’ll also notice the text, “Ready and willing to ignite,” because that’s what we are and that’s what this jacket does. It’s ready to play. Convenience features Because the Haste has the “H2O” designation, that means we’ve included a shield against the rain. By incorporating the hydratex|Mesh G-liner construction, you can ride in the rain without a second thought. You can even ride when it’s chillier out thanks to the inclusion of the detachable thermal liner. Conveniently take it out when temperatures warm up. Furthermore, we’ve included a detachable snap-button hood, so if you prefer to ride without it, that’s entirely up to you.

Comfort features

Adjustability:
Adjustment strap at waist

Adjustment tab at cuffs
Pockets:
Two inner pockets

Two pockets on front
Features:
Detachable hood

Jeans loop

Short connection zipper

Wind catcher behind front zipper

Climate features

Waterproofing:
hydratex|Mesh G-liner
Insulation:
Detachable thermal liner

Wind catcher behind front zipper

Protection features

Protection:
3D mesh protector pockets

Prepared for SEESOFT CE-level 2 Insert Back Protector

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors
Outer shell material:
Polyester stretch

ripstop 600D

Softshell 3L
Visibility:
Laminated reflection at upper arms

Laminated reflection on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! PHOTON SMOCK - CAMO BLUE

$ 5,807.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Protective smock tailored to the modern rider.

Experience a new chapter in our Tech Fashion collection with the hooded Photon smock. Drawing inspiration from sportswear trends, we bring to life PPE for the young urban rider. Relaxed riding A large part of the appeal of a smock is its generous fit. The long torso and wide shoulders of the Photon allow for generous flexibility whether on the bike or heading to your local meet-up by foot. Additionally, its 3L softshell outer material combined with wind-blocking characteristics contributes to its overall comfort. And in terms of safety, we’ve included SEESMART shoulder and elbow protectors, as well as the option to outfit it with the available back protector. Smart convenience and tailoring To keep personal items close, the Photon has a convenient storage system. There is a large kangaroo pocket at the front and two large stash pockets along the side. Within the large front kangaroo pocket, we included a Back Protector Cinch System that allows you to pull the back protector close to your body while allowing the oversized nature of the Photon smock to stay intact. This feature can be effortlessly loosened when you want to take it off or need some extra room when off the bike.

Comfort features

Adjustability:
Adjustable back protection

Adjustment drawcord at hem

Adjustment tab at cuffs

Back Protector Cinch System
Pockets:
Two slit pockets on front

XL storage pocket
Lining:
Mesh
Features:
Adjustment drawcord at hood

Button fixation for hood

Easy entrance zipper at side seam

Fixed hood

Jeans loop

Short connection zipper

Climate features

Insulation:
WindBarrier®

Protection features

Protection:
3D mesh protector pockets

Prepared for Avertum Tech-Air® airbag system - TRUE TO SIZE

Prepared for SEESOFT CE-level 2 Insert Back Protector

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors
Outer shell material:
Softshell 3L
Visibility:
Laminated reflection on hood

Laminated reflective logo on chest

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! PHOTON SMOCK - DARK BLUE-GREEN

$ 5,807.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Protective smock tailored to the modern rider.

Experience a new chapter in our Tech Fashion collection with the hooded Photon smock. Drawing inspiration from sportswear trends, we bring to life PPE for the young urban rider. Relaxed riding A large part of the appeal of a smock is its generous fit. The long torso and wide shoulders of the Photon allow for generous flexibility whether on the bike or heading to your local meet-up by foot. Additionally, its 3L softshell outer material combined with wind-blocking characteristics contributes to its overall comfort. And in terms of safety, we’ve included SEESMART shoulder and elbow protectors, as well as the option to outfit it with the available back protector. Smart convenience and tailoring To keep personal items close, the Photon has a convenient storage system. There is a large kangaroo pocket at the front and two large stash pockets along the side. Within the large front kangaroo pocket, we included a Back Protector Cinch System that allows you to pull the back protector close to your body while allowing the oversized nature of the Photon smock to stay intact. This feature can be effortlessly loosened when you want to take it off or need some extra room when off the bike.

Comfort features

Adjustability:
Adjustable back protection

Adjustment drawcord at hem

Adjustment tab at cuffs

Back Protector Cinch System
Pockets:
Two slit pockets on front

XL storage pocket
Lining:
Mesh
Features:
Adjustment drawcord at hood

Button fixation for hood

Easy entrance zipper at side seam

Fixed hood

Jeans loop

Short connection zipper

Climate features

Insulation:
WindBarrier®

Protection features

Protection:
3D mesh protector pockets

Prepared for Avertum Tech-Air® airbag system - TRUE TO SIZE

Prepared for SEESOFT CE-level 2 Insert Back Protector

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors
Outer shell material:
Softshell 3L
Visibility:
Laminated reflection on hood

Laminated reflective logo on chest

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! PHOTON SMOCK - BLACK

$ 5,807.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Protective smock tailored to the modern rider.

Experience a new chapter in our Tech Fashion collection with the hooded Photon smock. Drawing inspiration from sportswear trends, we bring to life PPE for the young urban rider. Relaxed riding A large part of the appeal of a smock is its generous fit. The long torso and wide shoulders of the Photon allow for generous flexibility whether on the bike or heading to your local meet-up by foot. Additionally, its 3L softshell outer material combined with wind-blocking characteristics contributes to its overall comfort. And in terms of safety, we’ve included SEESMART shoulder and elbow protectors, as well as the option to outfit it with the available back protector. Smart convenience and tailoring To keep personal items close, the Photon has a convenient storage system. There is a large kangaroo pocket at the front and two large stash pockets along the side. Within the large front kangaroo pocket, we included a Back Protector Cinch System that allows you to pull the back protector close to your body while allowing the oversized nature of the Photon smock to stay intact. This feature can be effortlessly loosened when you want to take it off or need some extra room when off the bike.

Comfort features

Adjustability:
Adjustable back protection

Adjustment drawcord at hem

Adjustment tab at cuffs

Back Protector Cinch System
Pockets:
Two slit pockets on front

XL storage pocket
Lining:
Mesh
Features:
Adjustment drawcord at hood

Button fixation for hood

Easy entrance zipper at side seam

Fixed hood

Jeans loop

Short connection zipper

Climate features

Insulation:
WindBarrier®

Protection features

Protection:
3D mesh protector pockets

Prepared for Avertum Tech-Air® airbag system - TRUE TO SIZE

Prepared for SEESOFT CE-level 2 Insert Back Protector

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors
Outer shell material:
Softshell 3L
Visibility:
Laminated reflection on hood

Laminated reflective logo on chest

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! ECLIPSE 2 JACKET - SAND

$ 3,630.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Mesh textile summer jacket for urban riding

Summers seem to last longer in the city. Hotter days and warmer nights demand a riding essential – a lightweight jacket that cools you down. But the Eclipse 2 jacket doesn’t only optimize airflow. Beneath strategically placed polyester mesh panels, there’s SEESMART armor with CE-rated protection that you can rely on. Plus, plenty of practical touches for your daily trips around town like the zipped pockets, a wind catcher behind the front zipper, and a jeans loop – all the season’s essentials. Cooler for commuters winding your way to work in rush hour, you’ll appreciate the breathable mesh panels at the front, the back, and the inner arms that send a current of air around your entire body. An abrasion-resistant 600-denier polyester construction adds a sense of secure comfort, plus you can customize the fit with tabs at the waist, cuffs, and bicep. Pump up the protection Eclipse 2 has evolved. Now there's SEESMART CE-Level 1 armor at the elbows and shoulders. You can up your level even higher with the SEESOFT CE-Level 2 back protector to offer inconspicuous yet highly effective impact resistance. So, when you’re whizzing about town you can feel pumped about protection, not weighed down by it.

COMFORT FEATURES

Adjustability:
Adjustment tab at cuffs

Adjustment tab at upper arm

Adjustment tab at waist
Pockets:
Inner pocket

Two slit pockets on front
Lining:
Mesh
Features:
Jeans loop

V-flap at cuff

CLIMATE FEATURES

Insulation:
Wind catcher behind front zipper

PROTECTION FEATURES

Protection:
Prepared for SEESOFT™ CE-level 2 Insert Back Protector

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors
Outer shell material:
Polyester 600D

Polyester mesh
Visibility:
Laminated reflective logo on back

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

REV'IT! ECLIPSE 2 JACKET - TARMAC

$ 3,630.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Mesh textile summer jacket for urban riding

Summers seem to last longer in the city. Hotter days and warmer nights demand a riding essential – a lightweight jacket that cools you down. But the Eclipse 2 jacket doesn’t only optimize airflow. Beneath strategically placed polyester mesh panels, there’s SEESMART armor with CE-rated protection that you can rely on. Plus, plenty of practical touches for your daily trips around town like the zipped pockets, a wind catcher behind the front zipper, and a jeans loop – all the season’s essentials. Cooler for commuters winding your way to work in rush hour, you’ll appreciate the breathable mesh panels at the front, the back, and the inner arms that send a current of air around your entire body. An abrasion-resistant 600-denier polyester construction adds a sense of secure comfort, plus you can customize the fit with tabs at the waist, cuffs, and bicep. Pump up the protection Eclipse 2 has evolved. Now there's SEESMART CE-Level 1 armor at the elbows and shoulders. You can up your level even higher with the SEESOFT CE-Level 2 back protector to offer inconspicuous yet highly effective impact resistance. So, when you’re whizzing about town you can feel pumped about protection, not weighed down by it.

COMFORT FEATURES

Adjustability:
Adjustment tab at cuffs

Adjustment tab at upper arm

Adjustment tab at waist
Pockets:
Inner pocket

Two slit pockets on front
Lining:
Mesh
Features:
Jeans loop

V-flap at cuff

CLIMATE FEATURES

Insulation:
Wind catcher behind front zipper

PROTECTION FEATURES

Protection:
Prepared for SEESOFT™ CE-level 2 Insert Back Protector

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors
Outer shell material:
Polyester 600D

Polyester mesh
Visibility:
Laminated reflective logo on back

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

BELSTAFF CLIMATE MOTORCYCLE VEST

$ 4,719.00

Snap-in compatible with our waxed cotton Trialmaster, Brooklands, Crosby, and Waymaster jackets, the Climate Vest is also a statement piece when worn alone. Linear quilted with premium PrimaLoft fill for warmth and a high-stand collar for extra insulation. The look is completed by a gunmetal engraved top collar stud and Classic Logo patch on left breast.

DETAILS

Lightweight ripstop with Primaloft fill
Gunmetal engraved stud at top collar
Hidden stud placket
Stud fastening side pockets
Belstaff logo chest patch
Primaloft insulation
Linear quilted
High stand collar for added insulation
Compatible with waxed cotton Trialmaster Motorcycle Jacket, waxed cotton Brooklands Motorcycle Jacket, Crosby Motorcycle Jacket, and Waymaster Motorcycle Jacket
100% polyester
Product ref: 105348Black

CARE

Wash max 30°C - mild process. Wash inside out with non-bio detergent. Close all fastenings before cleaning
Do not bleach or dry clean. Ironing maximum temperature 110°C without steam. Iron with a cloth in between
Tumble drying at low temperature max 60°C. After washed and dried, tumble dry for 20 minutes to reactivate water-repellent treatment

SIZE AND FIT

Cut for a regular fit
Model wears a size L
Model measures: Height: 6,0", Chest: 38", Waist: 31”

SIZE	UK/US	EU	MEASUREMENTS (CM)
XS	34	44	Chest: 90 Waist: 78.5 Hip: 91 Overarm: 82.5
S	36-38	46-48	Chest: 94-98 Waist: 82.5-86.5 Hip: 95-99 Overarm: 84-85.5
M	38-40	48-50	Chest: 98-102 Waist: 86.5-90.5 Hip: 99-103 Overarm: 85.5-87
L	40-42	50-52	Chest: 102-106 Waist: 90.5-94.5 Hip: 103-107 Overarm: 87-88.5
XL	42-44	52-54	Chest: 106-110 Waist: 94.5-98.5 Hip: 107-111 Overarm: 88.5-90
2XL	44-46	54-56	Chest: 110-114 Waist: 98.5-102.5 Hip: 111-115 Overarm: 90-91.5
3XL	46-48	56-58	Chest: 114-118 Waist: 102.5-106.5 Hip: 115-119 Overarm: 91.5-93
4XL	48	58	Chest: 118 Waist: 106.5 Hip: 119 Overarm: 93
5XL	50	60	Chest: 122 Waist: 110.5 Hip: 123 Overarm: 94.5

BELL 3-SNAP BUBBLE DLX SHIELD - ICE BLUE

$ 653.00

Go full retro style with a variety of 3-Snap Bubble Shield options. Compatible with Bell Custom 500 Helmets, Biltwell Bonanza Helmets, DMD Vintage & Retro Jet Helmets and many other open face helmets with a 3-snap design.

Can be flipped-up when combined with the aluminium or plastic flip-up mechanism

BELL 3-SNAP BUBBLE DLX SHIELD - ICE BLUE

BELL MOTO 3 - DEATHSPRAY PINK/PURPLE

$ 5,444.00

MOTO 3. NOT RETRO. ORIGINAL.

The iconic legend has returned! When the original Moto-3 was created back in the late 70s it was a product ahead of its time. Quickly becoming the industry standard in performance and style, today's Moto-3 is everything it was style-wise, with the added benefits of modern saftey and production advancements. From the fiberglass composite shell to the EPS-lined chin bar, we left no detail unpolished. The solid colors use the original style terrycloth liner, which is removable and washable.

STYLMARTIN IMPACT RS WP (WATERPROOF) BOOTS

$ 6,098.00

In addition to the lightweight microfiber version, Stylmartin also includes the Impact RS WP boot in its Trial segment. This version features only high-quality leather and is also waterproof making them suitable for riding in all kinds of weather conditions and also a good alternative for adventure riding.

FEATURES

Designed in Italy and manufactured in the EU
CE certified EN 13634:2017
Quality leather
Special grip sole
Ideal construction
Waterproof and breathable
Air intake

DETAILS

UPPER	water-repellent full-grain greased leather
LINING	waterproof and breathable
PROTECTIONS	PU moulded ankle protections on both sides with padded anti-shock lining
FASTENING	adjustable and replaceable quick release buckles
AIR INTAKE	moulded shin plate with air vents
INSOLE	anatomic and replaceable
OUTSOLE	specific anti-slip compound rubber

Stylmartin boots generally fit true to size. To ensure the best fit before placing an order online, we suggest placing your feet on a standard piece of paper, trace a line behind your heel and in front of your longest toe. Measure the distance between those two lines then check with the conversion chart. If in between sizes, better to size up.

UK	USA	EU	Foot Length (millimeters [mm])
5	6	38	246
6	7	39	253
6.5	7.5	40	260
7.5	8.5	41	265
8	9	42	273
9	10	43	280
10	11	44	287
10.5	11.5	45	294
11	12	46	300
12	13	47	307

STYLMARTIN IMPACT RS WP (WATERPROOF) BOOTS

STYLMARTIN CONTINENTAL BOOTS - RED

$ 7,404.00

This boot is the legendary Continental “vintage” boot. A perfect mix between tradition and today’s modern technology make this water-repellent full-grain leather and Vibram® anti-slip grip rubber soled boot, an “evergreen” in the Stylmartin collection.

FEATURES

CE certified EN 13634:2017
Quality leather
Special grip Vibram sole
Breathable
Woman sizing available

DETAILS

UPPER	water-repellent full-grain leather
LINING	leather
PROTECTIONS	internal PU moulded ankle protections
FASTENING	leather straps with adjustable clasp
INSOLE	anatomic and replaceable, breathable thanks to micro-perforated holes
OUTSOLE	Vibram^® anti-slip grip rubber

Stylmartin boots generally fit true to size. To ensure the best fit before placing an order online, we suggest placing your feet on a standard piece of paper, trace a line behind your heel and in front of your longest toe. Measure the distance between those two lines then check with the conversion chart. If in between sizes, better to size up.

UK	USA	EU	Foot Length (millimeters [mm])
3.5	4.5	36	231
4	5	37	237
5	6	38	244
6	7	39	250
6.5	7.5	40	257
7.5	8.5	41	263
8	9	42	270
9	10	43	277
10	11	44	283
10.5	11.5	45	290
11	12	46	296
12	13	47	303

STYLMARTIN CONTINENTAL BOOTS - BLACK

$ 7,404.00

This boot is the legendary Continental “vintage” boot. A perfect mix between tradition and today’s modern technology make this water-repellent full-grain leather and Vibram® anti-slip grip rubber soled boot, an “evergreen” in the Stylmartin collection.

FEATURES

CE certified EN 13634:2017
Quality leather
Special grip Vibram sole
Breathable
Woman sizing available

DETAILS

UPPER	water-repellent full-grain leather
LINING	leather
PROTECTIONS	internal PU moulded ankle protections
FASTENING	leather straps with adjustable clasp
INSOLE	anatomic and replaceable, breathable thanks to micro-perforated holes
OUTSOLE	Vibram^® anti-slip grip rubber

Stylmartin boots generally fit true to size. To ensure the best fit before placing an order online, we suggest placing your feet on a standard piece of paper, trace a line behind your heel and in front of your longest toe. Measure the distance between those two lines then check with the conversion chart. If in between sizes, better to size up.

UK	USA	EU	Foot Length (millimeters [mm])
3.5	4.5	36	231
4	5	37	237
5	6	38	244
6	7	39	250
6.5	7.5	40	257
7.5	8.5	41	263
8	9	42	270
9	10	43	277
10	11	44	283
10.5	11.5	45	290
11	12	46	296
12	13	47	303

STYLMARTIN MATRIX WP (WATERPROOF) BOOTS

$ 7,622.00

The Matrix WP is a versatile and unique boot that mixes riding segments and styles. The full-grain writer leather, breathable and waterproof liner, PU moulded ankle, shin and calf protections, leather gear pad protection and the Vibram® anti-slip grip rubber make the Matrix WP the perfect boot for adventure, touring and off-road riding (thanks to the steel toe cap, if needed).

FEATURES

Designed in Italy and manufactured in the EU
CE certified EN 13634:2017
Quality leather
Special grip Vibram sole
Ideal construction
Waterproof and breathable

DETAILS

UPPER	full-grain writer leather
LINING	waterproof and breathable
PROTECTIONS	PU moulded ankle protection on both sides, leather gear pad protection, moulded and thermoformed shin and calf protection
FASTENING	adjustable and replaceable self-blocking buckles and velcro
INSOLE	anatomic and replaceable
OUTSOLE	Vibram^® anti-slip grip rubber
EXTRAS	rear reflex insert, black steel toe cap

Stylmartin boots generally fit true to size. To ensure the best fit before placing an order online, we suggest placing your feet on a standard piece of paper, trace a line behind your heel and in front of your longest toe. Measure the distance between those two lines then check with the conversion chart. If in between sizes, better to size up.

UK	USA	EU	Foot Length (millimeters [mm])
6	7	39	254
6.5	7.5	40	260
7.5	8.5	41	267
8	9	42	273
9	10	43	279
10	11	44	286
10.5	11.5	45	292
11	12	46	298
12	13	47	305

STYLMARTIN SMITH WP (WATERPROOF) BOOTS

$ 4,791.00

This urban ankle boot features breathable fabric and leather overlays, a waterproof and breathable lining, and a turn-up collar with clip-on buttons to adjust height. D3O® and PU internal malleolus protectors on both sides and a leather shifter guard area make this a comfortable, high-performance boot.

FEATURES

CE certified EN 13634:2017
Quality leather
Special grip sole
Waterproof and breathable
Antishock
D30® Technology

DETAILS

UPPER	breathable textile fabric and leather inserts
LINING	waterproof and breathable membrane
PROTECTIONS	D3O^® protective internal malleolus inserts on both sides, leather heel and toe protections
FASTENING	laces (2 color variations and lengths)
INSOLE	anatomic, replaceable, perforated anti-shock cushioning
OUTSOLE	TR compound + rubber touch for high grip and abrasion resistance
EXTRAS	turn-up collar with clip-on buttons to adjust boot height

Stylmartin boots generally fit true to size. To ensure the best fit before placing an order online, we suggest placing your feet on a standard piece of paper, trace a line behind your heel and in front of your longest toe. Measure the distance between those two lines then check with the conversion chart. If in between sizes, better to size up.

UK	USA	EU	Foot Length (millimeters [mm])
6	7	39	259
6.5	7.5	40	266
7.5	8.5	41	272
8	9	42	278
9	10	43	284
10	11	44	291
10.5	11.5	45	297
11	12	46	303
12	13	47	310

STYLMARTIN ROCKET WP (WATERPROOF) BOOTS - BROWN

$ 5,445.00

The Stylmartin Rocket WP are our waterproof military-style boots with a vintage twist: a perfect mixture of quality, safety, and style. The slight antique blend on the full-grain leather intensifies the “worn-in” effect, embellishing the look. The waterproof and breathable lining, PU moulded protections and the leather gear protection, lace and zip closing make the Rocket WP a part of the Stylmartin core range.

FEATURES

CE certified EN 13634:2017
Quality leather
Special grip sole
Waterproof and breathable

DETAILS

UPPER	full-grain writer leather (Rocket WP brown) and full-grain greased leather (Rocket Wp black)
LINING	waterproof and breathable
PROTECTIONS	internal PU moulded ankle protections on both sides, leather gear protection
FASTENING	zip, adjustable leg strap and laces
INSOLE	anatomic, replaceable and breathable thanks to micro-perforated holes
OUTSOLE	anti-slip, anti-static and oil-resistant rubber

Stylmartin boots generally fit true to size. To ensure the best fit before placing an order online, we suggest placing your feet on a standard piece of paper, trace a line behind your heel and in front of your longest toe. Measure the distance between those two lines then check with the conversion chart. If in between sizes, better to size up.

UK	USA	EU	Foot Length (millimeters [mm])
6	7	39	259
6.5	7.5	40	266
7.5	8.5	41	272
8	9	42	278
9	10	43	284
10	11	44	291
10.5	11.5	45	297
11	12	46	303
12	13	47	310

STYLMARTIN ROCKET WP (WATERPROOF) BOOTS - BROWN

STYLMARTIN ZED AIR SNEAKERS

$ 4,138.00

The Zed Air Sneakers feature a perforated and breathable suede leather upper. This new summer version assures optimal ventilation in warm riding conditions. The new and innovative Michelin® sole provides exceptional traction while riding on any terrain and the D3O® technology offers excellent ankle protection. Zed Air is the perfect choice for exploring new destinations during summer riding.

FEATURES

Designed in Italy and manufactured in the EU
CE certified EN 13634:2017
Quality leather
Special grip sole by Michelin®
Breathable
D30® Technology

DETAILS

UPPER	water-repellent perforated suede leather and water-repellent leather collar
LINING	breathable air mesh
PROTECTIONS	moulded PU and D3O® protective ankle inserts featured on both sides, gear protection
FASTENING	internal zip and reflective laces
INSOLE	anatomic, replaceable, perforated anti-shock cushioning
OUTSOLE	rubber tread Michelin® outsole with EVA midsole
EXTRAS	reflective inserts on upper and ankle protection

Stylmartin boots generally fit true to size. To ensure the best fit before placing an order online, we suggest placing your feet on a standard piece of paper, trace a line behind your heel and in front of your longest toe. Measure the distance between those two lines then check with the conversion chart. If in between sizes, better to size up.

UK	USA	EU	Foot Length (millimeters [mm])
6	7	39	255
6.5	7.5	40	261
7.5	8.5	41	267
8	9	42	274
9	10	43	280
10	11	44	286
10.5	11.5	45	293
11	12	46	299
12	13	47	305

BILTWELL LANE SPLITTER ECE 22.06 - GLOSS BLACK/WHITE FLAMES

$ 7,404.00

Lane Splitter was the first Biltwell helmet engineered to meet Europe’s comprehensive motorcycle safety standards a decade ago. Today, our feature-rich helmet for high-performance riders is ECE R22.06 certified to ensure high levels of rider safety and protection.

Injection-molded ABS outer shell is lightweight and highly resistant to impacts
Aggressively styled shell features front, side, and rear ventilation to improve interior airflow, moisture dissipation, and cooling
New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
Removable BioFoam spoiler on underside of chin bar reduces turbulence below the rider’s face
Molded urethane chin bar pad dissipates energy during front impact
Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
Molded EPS ear pockets fit select aftermarket audio accessories
US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. To meet Europe's new, more robust standards for impact attenuation and rider safety, ECE R22.06-certified helmets may fit you more snugly than similar US DOT-compliant models. NOTE: We offer accessory cheek pads so you can fine-tune the comfort of your helmet against your cheeks and face for a perfect fit.

BILTWELL LANE SPLITTER ECE 22.06 - GLOSS BLACK/WHITE FLAMES

REV'IT! CALIBER GLOVES-MID-GREY

$ 2,033.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, leather/textile mix, ventilated off-road gloves

The Caliber gloves (as part of the DIRT Series collection) feel perfectly at home on or off-road. Why? Because this snug-fitting pair of hand protectors combine the best of both leather and mesh. In order to keep your hands safe, these CE-certified gloves incorporate PWR|Shield fabric at the palm for maximum abrasion resistance. The top of the gloves are constructed with well-ventilated PWR|Stretch mesh and flexible TPR protection is found on the fingers and knuckles. This combination – along with stretch in all the right places - provides optimal freedom of movement and the armor necessary to keep your hands safe whether riding on the asphalt or exploring off the beaten path. Additionally, the comfortable neoprene cuff will keep dust and water out of the gloves.

Adjustability

Stretch at fingers
Stretch at thumb
Stretch fabric on back of hand

Closure

Hook-and-loop closure
Wrist strap

Lining

Tri-fleece liner: This polyester tricot fabric is used for glove lining, and brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp.

Features

Connect Finger Tip: Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
Grip patch at palm: A grip patch is made with a texturized pattern to deliver a superb grip performance.
Outside stitching: The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.
Pull tab: Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
Regular cuff
Ventilation: Ventilation holes

Protection

Injected ventilated flex knuckle: This knuckle protection is injected in the upper material which makes it very flexible and abrasion resistant. Due to its structure it ventilates very well while keeping you safe.
Outseam stitching by Guterman: Marketing calls it PWR yarn
PWR|Shield at palm: PWR|Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance levels. This product is equipped with PWR|Shield at the palm.
Temperfoam® knuckle
Temperfoam® palm slider
Temperfoam® thumb knuckle
TPR finger knuckles

Outer shell material

Connect finger tip fabric: Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
Corduroy
Goatskin: Tanned leather made from goatskin is considered extremely durable, and is often used for gloves and other products that require a soft hide.
Neoprene: Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.
PWR|Stretch mesh

Certification

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating. For more details about certification click here.

GOLDTOP COOLMAX NECK TUBE - DECAL LOGO

$ 610.00

Keep wind and road debris off your face and look good doing it with Goldtop neck tubes/gaiters.

Measures 49 x 25cm
Constructed in Coolmax™ fabric for maximum breathability and moisture-wicking properties
Designed with warm weather in mind: this is our coolest neck tube
One size fits all

GOLDTOP COOLMAX NECK TUBE - CUBIC KHAKI

$ 610.00

Keep wind and road debris off your face and look good doing it with Goldtop neck tubes/gaiters.

Measures 49 x 25cm
Constructed in Coolmax™ fabric for maximum breathability and moisture-wicking properties
Designed with warm weather in mind: this is our coolest neck tube
One size fits all

GOLDTOP NECK TUBE - MASCOT

$ 610.00

Keep wind and road debris off your face and look good doing it with Goldtop neck tubes/gaiters.

Made from 100% polyester with a brushed internal finish for comfort and warmth
Measures 24 x 36.5cm
3 season - ideal for the average British (or Canadian) climate. For Winter conditions we recommend our Merino Wool Neck Tube.
One size fits all

GOLDTOP NECK TUBE - RED HERRINGBONE

$ 610.00

Keep wind and road debris off your face and look good doing it with Goldtop neck tubes/gaiters.

Made from 100% polyester with a brushed internal finish for comfort and warmth
Measures 24 x 36.5cm
3 season - ideal for the average British (or Canadian) climate. For Winter conditions we recommend our Merino Wool Neck Tube.
One size fits all

GOLDTOP NECK TUBE - CUBIC GREEN

$ 610.00

Keep wind and road debris off your face and look good doing it with Goldtop neck tubes/gaiters.

Made from 100% polyester with a brushed internal finish for comfort and warmth
Measures 24 x 36.5cm
3 season - ideal for the average British (or Canadian) climate. For Winter conditions we recommend our Merino Wool Neck Tube.
One size fits all

GOLDTOP NECK TUBE - GOLD HOUNDSTOOTH

$ 610.00

Keep wind and road debris off your face and look good doing it with Goldtop neck tubes/gaiters.

Made from 100% polyester with a brushed internal finish for comfort and warmth
Measures 24 x 36.5cm
3 season - ideal for the average British (or Canadian) climate. For Winter conditions we recommend our Merino Wool Neck Tube.
One size fits all

GOLDTOP NECK TUBE - GOLDTOP LOGO

$ 610.00

Keep wind and road debris off your face and look good doing it with Goldtop neck tubes/gaiters.

Made from 100% polyester with a brushed internal finish for comfort and warmth
Measures 24 x 36.5cm
3 season - ideal for the average British (or Canadian) climate. For Winter conditions we recommend our Merino Wool Neck Tube.
One size fits all

70's HELMET BUBBLE SHIELD - YELLOW

$ 581.00

Bubble visor, yellow shade
Fitted with three adjustable press studs
Can be flipped-up when combined with the aluminium or plastic flip-up mechanism
Universal visor applicable to all 70's Helmets and many other jet helmets on the market
One size fits all

HJC i80 MODULAR ADV HELMET - PEARL WHITE

$ 5,517.00

FEATURES

«APC» Advanced Polycarbonate Compound : By blending high-grade polycarbonate with high impact strength and ABS in an optimal ratio, HJC has developed a shell that is both strong and impact-resistant while maintaining a lightweight design.
« ACS » Advanced Channeling Ventilation System : Top vents and 2 step toggle lower vents; Full front-to-back airflow flushes heat and humidity out of the helmet
Pinlock Ready HJ-44 Visor: Provides 99% UV protection, Anti-Scratch coated
Wind tunnel tested peak visor and fine-tuned using advanced CFD (Computational Fluid Dynamics) programs, provided maximum stability and reduced drag,
even at high speeds
Dark Smoke sun shield installed
Interior parts : Moisture-wicking and Dry
3D contour cheek pads for comfort
Crown and Cheek pads : Removable and washable
Cheek Pads: Interchangeable throughout all sizes
Glasses Grooves : Accommodates riders with eyewear
It comes standard with both Pinlock and Chin Curtain

HJC i80 MODULAR ADV HELMET - PEARL WHITE

SIDI MID ADVENTURE 2 GORE BOOTS - MILITARY GREEN

$ 6,824.00

Experience la passione italiana with the Sidi Mid Adventure 2 Gore Boot. Crafted for the adventurous spirit, this boot combines Italian craftsmanship with every day comfort and durability. Perfect for navigating diverse terrains with ease and style, it's your essential companion for both wet and dry journeys. The mid version is a shorter, more pratical version of the Adventure 2 gore. While the non-slip rubber outsole provides optimum grip and total control in all situations and terrain, the micro-adjustable buckle system ensures total comfort. Versatile and untiring, the special Gore fabric is a bonus for the best possible exploration, even in rain and muddy conditions.

Velcro and Replaceable Buckle System

The gaiter is fastened securely with a supple PU Velcro strap, offering ample adjustability.

The closure is further accomplished by a 2-buckle system where each buckle operates independently. Each buckle comprises a toothed strap and a hook with micrometric adjustment memory.

Notably, all components - the buckle, strap, and hook - are replaceable. The buckles feature a single fixed point (via a screw), ensuring easy closure and enabling the boot to conform to the rider's leg, providing enhanced comfort.

TECH SPECS

100% waterproof GORE-TEX membrane
Closure with Velcro strap
Rear reflective inserts
Ankle pads with both internal and external shaping
Sturdy, impact-resistant, anatomically contoured heel cup
Included shift pad

PRODUCT BENEFITS

Ready for any adventure: featuring SCRATCH-RESISTANT MICROFIBER/SUEDE
Individual fitting and adjustment: IMPACT RESISTANT DURABLE BUCKLES
Unmacthed grip, stability and comfort: ADVENTURE SOLE
Shielded: integrated protections
Long range comfort: supreme comfort is a must when touring in the unknown. Adventures sometimes have no respect for our fatigue, so we engineered our boot to be the most comfortable structure a pro dual rider will want to wear.
Offroad control: specially designed to be unbeatable on dirt roads, the boot has all the mechanisms to control the unexpected and protect the foot.
Control: a rubber sole with grip, designed to give riding feeling, safety and stability.

SIDI MID ADVENTURE 2 GORE BOOTS - MILITARY GREEN

SIDI ADVENTURE 2 GORE BOOTS - BLACK

$ 8,711.00

Amici, behold the Sidi Adventure 2 Gore Boot – a true gem for adventure riders. Waterproof and rugged, it's crafted for those of us with a heart for adventure and a soul for the open road. Italian design meets practicality, making it the perfect companion for any journey, rain or shine. Viva la moto!

Velcro and Replaceable Buckle System

The gaiter is sealed securely with a gentle PU velcro strap, serving to keep rocks and dirt out while offering extensive adjustability.

The closure is achieved through a 2-buckle closure system, with each buckle operating independently. Each buckle consists of a serrated strap and a hook with precise micrometric adjustment memory.

Notably, all components - the buckle, strap, and hook - are replaceable. The buckles are designed with a single fixed point (via a screw), facilitating easy closure and enabling the boot to conform to the rider's leg for enhanced comfort.

Flex System

To enhance racing performance and safety, the boot is furnished with a rear support structure that features a system resembling the Verterbra System employed in Sidi's Road Racing boots, resulting in increased flexibility. Additionally, it includes the Flex System, a joint located near the ankle for increased range of motion.

TECH SPECS

TPU shin plate
Micro adjustable and replaceable buckle system
Velcro strap closure
Full length GORE-TEX membrane for 100% waterproofing
Flex system
Rigid, shock resistant, anatomically shaped heel cup
Back reflective inserts
Elastic panel on calf area
Non slip rubber sole

PRODUCT BENEFITS

Ready for any adventure: featuring SCRATCH-RESISTANT MICROFIBER/SUEDE
Individual fitting and adjustment: IMPACT RESISTANT DURABLE BUCKLES
Unmacthed grip, stability and comfort: ADVENTURE SOLE
Shielded. For anything: PROTECTION INTEGRATED ON THE FRONT, SIDE AND TOE
Long range comfort: supreme comfort is a must when touring in the unknown. Adventures sometimes have no respect for our fatigue, so we engineered our boot to be the most comfortable structure a pro dual rider will want to wear.
Offroad support: adventures are real, so our boot is a real offroad lover. Designed to deliver support in standing riding and to offer all the protection from impacts that you need.
Maximum control: our sole is derived directly from over 50 years of offroad expertise, so that when you put your wet foot under a rock after a ford, you have the safe hold that you need.
Bult to last. It's a SIDI: quality products last over time, that's a fact. That's why we select the best materials and make all parts interchangeable, so you can use your favorite footwear for as long as you want.

ARAI VAS-V MAXVISION PINLOCK 120XLT FOG-RESISTANT INSERT LENS - CLEAR

$ 683.00

The 100% Max Vision Pinlock 120 fog resistant insert lens for the Arai is developed to be used in high demanding conditions such as on the racetrack or adventure riding. The Pinlock 120 insert lens has proven its extreme performance in premier racing series like MotoGP, WSBK, Formula 1 and more.

Our top of the line fog resistant solution for professionals, developed to eliminate fogging in demanding weather conditions. The Pinlock 120 creates a double shield system through a silicon seal between the helmet face shield and Pinlock insert lens, which makes up a double glass type of solution that prevents fogging. The insert is made of a moisture absorbing plastic and therefore, the surface basically dry when used. This air-tight pocket ensures that the difference in temperature becomes significantly lowered. The Pinlock insert absorbs moisture on the inside and offers you continuous clear visibility.

100% Max Vision
100% Max Vision Pinlock 120 insert lens is compatible with the Arai VAS-V IC stamped on the face shield and that are Pinlock prepared.

Compatible models: Corsair-X, Signet-X, Quantum-X, Defiant-X, Regent-X

SKU: 01-1057C-120

ARAI VAS-V MAXVISION PINLOCK 120XLT FOG-RESISTANT INSERT LENS - CLEAR

ARAI CONTOUR-X HELMET - DIAMOND WHITE

$ 15,389.00

New for 2023, the Contour-X is designed for the modern motorcycle rider and aimed at a brand-new generation of riders who desire dynamic race-derived performance and all-day comfort on the road.

Extensive work by the R&D team in the lab, on the road, and out on the racetrack, with the ever-present goal of creating a full-featured, exceptional new Arai helmet, the Contour-X comes with unmatched performance, but with room for a stylish new look that provides a high level of comfort and protection over thousands of miles.

CONTOUR-X FIT

Arai is the only company offering multiple interior-fit shapes to better address the infinite variety of riders’ head shapes and sizes.

No one pays more attention to the subtle variations and infinite possibilities of the human head shape than Arai. Why? Because it’s the secret to getting the best comfort and fit.

So for more than three decades, Arai has pioneered different shapes – and even different proportions within those shapes – in our various helmet models, working to offer a better fit for more people.

The Contour-X has Arai's INTERMEDIATE OVAL (IO) interior fit shape.*

*A Helmet needs to be tried on in order to determine a proper fit.

VAS-V Shield Mechanism

The Contour-X has the new VAS mechanism with a variable axis incorporating a moving pivot point. By combining the pin trajectory, which is based on an imaginary axis, with the two trajectories of the double pivot point slot, the shield opens and closes smoothly even with the much lower shield mount position.

A dual-function lever releases both the side cover/pod and shield pin for quick and simple shield removal. Being able to see the shield mechanism allows for easier shield changes.

3D ARAI LOGO DUCT

Immediately noticeable, the new 3D Arai logo duct (made as thin as possible, just 3.5mm in depth) feeds two central 10mm intake ports. This is a first in an Arai, and entirely due to PB-cLc2’s strength and the shell construction.

It also works very well at low speed and with an upright riding position; at just 31mph it’s channelling an extra 40% airflow, at 74.5mph, 7%. It can also be opened, or closed, quickly with summer or winter gloves, via a short-stroke lever placed at the top; if the rider can’t see the lever and the logo is in its normal place, the duct is open. The Arai logo duct is designed to break away in the event of an impact.

AERODYNAMIC REAR SPOILER WITH ONE PIECE EXHAUST FUNCTION

The one-piece aerodynamic rear exhaust/spoiler, operated by a 3-way switch, is inspired by the DF-X2 of the Corsair-X, but redesigned for touring use – however, it was tested up to 300km/h at Suzuka. It sits a little more forward on the shell and is fed by 3 ports in the shell. As part of Contour-X’s comprehensive ventilation system it efficiently draws air but also smooths airflow over (and from the side) of the helmet, improving stability and reducing buffeting, especially while overtaking at highway speeds. The result is much less rider fatigue. Manufactured as thin and light as possible it’s designed to crush or break away upon impact, therefore having no influence on protective performance.

AIR-SCOOP CHIN VENT

Also new is the 3-position (open, midway, and closed) sliding air-scoop chin vent which flows a larger intake volume of air and has a replaceable filter. The actuating mechanism is thicker and easy to use with gloves.

INTERCOM ACCOMMODATION

Designed to fit and connect a communication system easily on the shell exterior – and without any compromise to the protection offered by the inner EPS liner.

OUTER SHELL: PB-cLc2 (PERIPHERALLY BELTED COMPLEX LAMINATE CONSTRUCTION)

The Contour-X outer shell design outlines a stylish, organic shape and uses PB-cLc2 for lightweight strength. The AR-mat has been substituted with a new material which makes it possible to reduce the weight, while maintaining strength. An extra layer of Super Fiber belting maintains rigidity in a crucial area while offering fl at sides for easy fi tment of an intercom system.

5MM WIDER OPENING

The exclusive shell fl ares 5mm around the opening, making it easier to get the helmet on and off (for newcomers to Arai the initial ‘snugness’ when putting the helmet on or taking it off can be challenging).

NECK ROLL WIRE POCKET

A small stitched opening on the inside of the neck roll allows the intercom system installer to easily tuck away any excess wiring that may be left-over after installing the speakers. For a nice, clean final look and ride.

70's HELMET FLIP-UP BUBBLE SHIELD MECHANISM - BLACK POLYCARBONATE

$ 436.00

Robust plastic bubble shield lift mechanism
Fitted with 3 adjustable press studs
Works with all bubble visors