The Goldtop Ladies Bobber Motorcycle Jacket - Burgundy
Designed to look good and feel great both on and off of the bike, this CE "AAA" approved (EN 17092:2020) women's leather biker jacket comes fitted with Knox Microlock protectors in the elbows and shoulders as standard, with a pocket for an optional Knox back protector.
Manufactured from premium 1.3 mm Aniline Cowhide, finished with prestige quality zips and stainless steel fittings throughout, this jacket is soft to the touch, yet has been built to last, with the uncompromising quality of both materials and construction.
This is an understated and classic double-breasted style of ladies biker jacket, and noticeable detailing includes double-stitched diamond-quilted panels, and elasticated ribbing and side buckles for both comfort and fit.
Lined with champagne gold satin lining and a butter-soft ruby suede trim.
Available in sizes UK 6 to UK 16. If we don't have it in stock, contact us at info@strathmoto.com to inquire about placing a special order for you.
PRODUCT INFO
CE "AAA" Approved Protective Garment to EN 17092:2020
1.3mm thickness Racing Green aniline cowhide leather
CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separatelyhere.
Pocket for an optional CE Level 2 Knox Micro-lock back protector, which can be purchased separately here.
Double stitched diamond quilting on the shoulders and lower back panel
Elasticated ribbing side panels for comfort and fit
Industrial grade hand-polished asymmetric zip with AERO pull
Trademark Goldtop "Ladies" gold quilted lining
3 Zipped external pockets and
2 Interior chest pockets
Adjustable cuffs with ball zips
Stainless Steel adjustable waist buckles and collar snap
Tan suede leather trim inside collar and black suede leather trim inside cuffs and zip guard
Dropped back
The best way to determine your size, would be to go off the measurements that are given in the table below in centimetres (CM). These measurements have been taken with the jacket laid flat and are typically the most accurate to go off of. When comparing these measurements to an existing jacket that you own, please take into consideration the thickness of Goldtop leather and linings.
Please remember that this is only a guide! If in doubt, please go up a size.
To take your own measurements, first measure around your bust at the fullest part, then your waist around the natural waistline. Finally measure around your hips, typically 20cm below your natural waistline. Please take all measurements in inches.
Goldtop England's '72 Easy Rider Jacket recalls the chopper movement of the 70's and is inspired by the classic film, Easy Rider where Peter Fonda's character, Wyatt (a.k.a. "Captain America"), wears a badass black leather jacket with racing stripes. This jacket was also worn by Tom Hardy in "Venom: Let There be Carnage".
This is a jacket for modern-day riders who appreciate a subtle nod to the classic designs of the 1970s! Beautifully crafted from 1.4mm Aniline Cowhide, all hand finished with traditional ball zips, Stainless Steel fastenings, and a tan suede collar and black suede cuffs. This jacket comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for a Knox back protector (optional upgrade).
PRODUCT INFO
CE "AAA" Approved Protective Garment to EN 17092:2020
1.4mm thickness black aniline cowhide leather
CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separatelyhere.
Optional Knox Micro-lock Compact back protector can be purchasedhere
Industrial grade hand-polished centre zip with AERO pull
Blue quilted lining
3 Zipped external pockets
2 Interior chest pockets
Adjustable cuffs with ball zips
Stainless Steel adjustable waist buckles and collar snap
Tan suede leather trim inside collar
Black suede leather trim inside cuffs and zip guard
Dropped back
To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.
GOLDTOP 1958 JACKET - WAXED BROWN (CE ARMOURED)
Regular price
$ 10,363.00
Save $ -10,363.00
Timeless has a name: meet The 1958 Jacket. If you're looking for a jacket that doesn't scream "motorcycle jacket" and can double up as something you regularly wear out and about round town, this is it. As with all Goldtop jackets it's top-of-the-line CE "AAA" certified for the ultimate abrasion resistance. This jacket comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for a Knox Microlock Compact Back protector (optional upgrade).
PRODUCT INFO
CE "AAA" Approved Protective Garment to EN 17092:2020
CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard, with a pocket for an optional CE Level 2 Knox Micro-lock Compact back protector that can be purchased here. Note: You have the option to upgrade from the standard level 1 Knox elbow and shoulder armour to the new Knox Microlock Compact L2 Shoulder and Elbow armour set. Click here to purchase the upgrade.
Traditional 1950's American style collar
Industrial grade hand-polished centre zip with AERO pull
Trademark Goldtop gold quilted lining
2 External pockets
2 Interior chest pockets
Adjustable cuffs with ball zips
Stainless Steel adjustable waist buckles
Black suede leather trim inside cuffs
To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.
GOLDTOP '76 CAFE RACER JACKET (CE ARMOURED) - OLIVE GREEN
Regular price
$ 11,103.00
Save $ -11,103.00
Goldtop England's '76 Cafe Racer leather motorcycle jacket is quite simply, a timeless piece of café racer riding apparel! Based upon the original Goldtop 1976 Scuftuf design, this jacket comes hand-waxed, olive green aniline cowhide, with tan suede trim throughout, and Stainless Steel buckles & poppers. This jacket has comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for an optional back protector.
Available in sizes 38" to 48", and as these are hand-waxed jackets, the colour may vary slightly from jacket to jacket!
PRODUCT INFO
CE "AAA" Approved Protective Garment to EN 17092:2020
CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separatelyhere.
Optional Knox Micro-lock Compact back protector can be purchasedhere
Quilted panels on both the shoulders and elbows
Industrial grade hand-polished centre zip with AERO pull
Trademark Goldtop champagne quilted lining
2 Zipped external pockets and
2 Interior chest pockets
Adjustable cuffs with ball zips
Stainless Steel adjustable waist buckles and collar snap
Suede leather trim inside collar, cuffs and zip guard
Dropped back
To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.
GOLDTOP BOBBER JACKET (CE ARMOURED) - BLACK
Regular price
$ 10,363.00
Save $ -10,363.00
Goldtop's Bobber Jacket is a retro, classic 1970s style leather motorcycle jacket revived for modern-day riders. Featuring an asymmetric main zip, this double-breasted jacket provides protection through Knox's state of the art Micro-lock armour. It comes equipped with CE Level 1 armour in the shoulders and elbows and a pocket for an optional back protector. The jacket is manufactured from hand-selected, 1.4mm thick aniline cowhides which have each been hand-waxed, making each finished article unique, with a patina that ages beautifully with both time and wear. The whole jacket is finished by hand with a soft red suede trim inside the collar and cuffs, prestige quality zips throughout, and all additional metalware being made from high-quality polished Stainless Steel.
This jacket boasts a CE "AAA" level of protection, the highest most protective level it could possibly achieve.
Available in sizes 38" to 52". Is your size not currently available on our site? No problem; we do special orders! Contact us at info@strathmoto.com and let us know what you need. Note: sizes 50 and 52 are special order and as such carry an additional $100 charge already included in the price shown as compared to standard sizes.
CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separatelyhere.
Optional Knox Micro-lock Compact back protector can be purchasedhere
Double-stitched diamond quilting on shoulders and lower back panel
Traditional off-centre slanted zip
1 Exterior vertical breast pocket
2 Exterior side pockets with ball zips
2 Interior breast pockets
Single adjustable Stainless Steel waist buckles
Industrial grade hand-polished centre zip with AERO puller
Trademark Goldtop gold quilted lining
Red suede leather trim in collar & cuffs
To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.
GOLDTOP BOBBER JACKET (CE ARMOURED) - WAXED BROWN
Regular price
$ 10,363.00
Save $ -10,363.00
The Bobber Motorcycle Jacket
Goldtop's Bobber Jacket is a retro, classic 1970s style leather motorcycle jacket revived for modern-day riders. Featuring an asymmetric main zip, this double-breasted jacket provides protection through Knox's state of the art Micro-lock armour. It comes equipped with CE Level 1 armour in the shoulders and elbows and a pocket for an optional back protector. The jacket is manufactured from hand-selected, 1.4mm thick aniline cowhides which have each been hand-waxed, making each finished article unique, with a patina that ages beautifully with both time and wear. The whole jacket is finished by hand with a soft tan suede trim, prestige quality zips throughout, and all additional metalware being made from high-quality polished Stainless Steel.
This jacket boasts a CE "AAA" level of protection, the highest most protective level it could possibly achieve.
Available in sizes 38" to 52". Is your size not currently available on our site? No problem; we do special orders! Contact us at info@strathmoto.com and let us know what you need. Note: sizes 50 and 52 are special order and as such carry an additional $100 charge already included in the price shown as compared to standard sizes.
CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separatelyhere.
Optional Knox Micro-lock Compact back protector can be purchasedhere
Double-stitched diamond quilting on shoulders and lower back panel
Traditional off-centre slanted zip
1 Exterior vertical breast pocket
2 Exterior side pockets with ball zips
2 Interior breast pockets
Single adjustable Stainless Steel waist buckles
Industrial grade hand-polished centre zip with AERO puller
Trademark Goldtop gold quilted lining
Brown suede leather trim inside collar, cuffs, and zip guard
Dropped back
To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.
GOLDTOP BOBBER JACKET (CE ARMOURED) - OXBLOOD
Regular price
$ 11,103.00
Save $ -11,103.00
Goldtop's Bobber Jacket is a retro, classic 1970s style leather motorcycle jacket revived for modern-day riders. Featuring an asymmetric main zip, this double-breasted jacket provides protection through Knox's state of the art Micro-lock armour. It comes equipped with CE Level 1 armour in the shoulders and elbows and a pocket for an optional back protector. The jacket is manufactured from hand-selected, 1.4mm thick aniline cowhides which have each been hand-waxed, making each finished article unique, with a patina that ages beautifully with both time and wear. The whole jacket is finished by hand with a soft tan suede trim, prestige quality zips throughout, and all additional metalware being made from high-quality polished Stainless Steel.
This jacket boasts a CE "AAA" level of protection, the highest most protective level it could possibly achieve.
Available in sizes 38" to 48". Is your size not currently available on our site? No problem; we do special orders! Contact us at info@strathmoto.com and let us know what you need.
CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separatelyhere.
Optional Knox Micro-lock Compact back protector can be purchasedhere
Double-stitched diamond quilting on shoulders and lower back panel
Traditional off-centre slanted zip
1 Exterior vertical breast pocket
2 Exterior side pockets with ball zips
2 Interior breast pockets
Single adjustable Stainless Steel waist buckles
Industrial grade hand-polished centre zip with AERO puller
To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.