543 products
Sale
Quick view
Sale
Quick view
REV'IT! PACIFIC 4 H2O RAINSUIT - BLACK
Regular price
$ 3,279.00
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Easy-over, one-piece, waterproof, rainsuit for riders caught in the rain.
PRODUCT DESCRIPTION
As a company hailing from an often rain-affected country like the Netherlands, you could say we know a thing or two about how fickle mother nature can be. With the Pacific 4 H2O rain suit we’re looking to rid the world of half-measured rain over suits and beat rainy weather at its own capricious game. As quickly as weather can deteriorate, the Pacific 4 H2O is made to put on even quicker. Instant, easy access By focusing on easy access, you can slip into the Pacific 4 H2O in an instant. The long, diagonal zipper along the length of the rain suit, opens it up fully. Step right in and zip right up, and it’s you that stopping rain’s play for once. Adjustability is found at the cuffs, upper arms, waist, lower legs, and elastics at cuffs and hems to help secure the fit, so you’re not just staying dry but comfortable as well. Once the sun comes out, the Pacific 4 H2O rain suit is taken off with similar ease. Simply put it back into its own carrying pouch and slide it into your backpack or on-board storing area for when it’s needed again.
COMFORT FEATURES
Adjustability:
Adjustment strap at waist
Adjustment tab at cuffs
Adjustment tab at lower leg
Adjustment tab at upper arm
elasticated cuff
elasticated strap at foot
Pockets:
Stash pocket on upper leg
Features:
Protective cover at front zipper
Transport bag
XL front zipper
CLIMATE FEATURES
Waterproofing:
hydratex|Lite
PROTECTION FEATURES
Outer shell material:
polyester PU coated
PWR|shell with PU coating
Visibility:
Laminated reflection at calves
Laminated reflection on shoulders
Laminated reflective logo on back
Laminated reflective logo on chest
REV'IT! PACIFIC 4 H2O RAINSUIT - BLACK-NEON YELLOW
Regular price
$ 3,279.00
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Easy-over, one-piece, waterproof, rainsuit for riders caught in the rain.
PRODUCT DESCRIPTION
As a company hailing from an often rain-affected country like the Netherlands, you could say we know a thing or two about how fickle mother nature can be. With the Pacific 4 H2O rain suit we’re looking to rid the world of half-measured rain over suits and beat rainy weather at its own capricious game. As quickly as weather can deteriorate, the Pacific 4 H2O is made to put on even quicker. Instant, easy access By focusing on easy access, you can slip into the Pacific 4 H2O in an instant. The long, diagonal zipper along the length of the rain suit, opens it up fully. Step right in and zip right up, and it’s you that stopping rain’s play for once. Adjustability is found at the cuffs, upper arms, waist, lower legs, and elastics at cuffs and hems to help secure the fit, so you’re not just staying dry but comfortable as well. Once the sun comes out, the Pacific 4 H2O rain suit is taken off with similar ease. Simply put it back into its own carrying pouch and slide it into your backpack or on-board storing area for when it’s needed again.
COMFORT FEATURES
Adjustability:
Adjustment strap at waist
Adjustment tab at cuffs
Adjustment tab at lower leg
Adjustment tab at upper arm
elasticated cuff
elasticated strap at foot
Pockets:
Stash pocket on upper leg
Features:
Protective cover at front zipper
Transport bag
XL front zipper
CLIMATE FEATURES
Waterproofing:
hydratex|Lite
PROTECTION FEATURES
Outer shell material:
polyester PU coated
PWR|shell with PU coating
Visibility:
Laminated reflection at calves
Laminated reflection on shoulders
Laminated reflective logo on back
Laminated reflective logo on chest
DMD VINTAGE JET HELMET ECE 22.05 - MATTE GREEN - S - SALE!
Regular price
$ 4,277.00
Sale price
$ 3,706.00
Save $ 571.00
The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its plush inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet fashionable and stylish with an original design. Each model has its own personality with cool custom paints.
TECHNICAL DETAILS:
- Fiberglass Shell
- Removable and washable liner
- Three different shells for perfect fit and maximum compactness
- Shell 1: XS - 54 cm; S - 55 cm
- Shell 2: M - 56/57 cm
- Shell 3: L - 58 cm; XL - 59/60 cm
- Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
- Padded chin strap with Double D-ring closure
- ECE Homologation
PRODUCT CARE
- Helmets are made of materials that can be damaged by many commonly available cleaners.
- Clean the helmet using a soft cloth or sponge, warm water and mild soap.
- When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
- Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
- Clean the removable liner by hand washing, then permit to air dry whenever possible to prevent heat damage.
GOLDTOP '72 EASY RIDER JACKET
Regular price
$ 10,691.00
Goldtop England's '72 Easy Rider Jacket recalls the chopper movement of the 70's and is inspired by the classic film, Easy Rider where Peter Fonda's character, Wyatt (a.k.a. "Captain America"), wears a badass black leather jacket with racing stripes. This jacket was also worn by Tom Hardy in "Venom: Let There be Carnage".
This is a jacket for modern-day riders who appreciate a subtle nod to the classic designs of the 1970s! Beautifully crafted from 1.4mm Aniline Cowhide, all hand finished with traditional ball zips, Stainless Steel fastenings, and a tan suede collar and black suede cuffs. This jacket comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for a Knox back protector (optional upgrade).
PRODUCT INFO
- CE "AAA" Approved Protective Garment to EN 17092:2020
- 1.4mm thickness black aniline cowhide leather
- CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
- Optional Knox Micro-lock Compact back protector can be purchased here
- Industrial grade hand-polished centre zip with AERO pull
- Blue quilted lining
- 3 Zipped external pockets
- 2 Interior chest pockets
- Adjustable cuffs with ball zips
- Stainless Steel adjustable waist buckles and collar snap
- Tan suede leather trim inside collar
- Black suede leather trim inside cuffs and zip guard
- Dropped back
To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.
GOLDTOP LADIES BOBBER JACKET (CE ARMOURED) - BURGUNDY - SIZE 10 - LAST ONE!
Regular price
$ 9,978.00
The Goldtop Ladies Bobber Motorcycle Jacket - Burgundy
Designed to look good and feel great both on and off of the bike, this CE "AAA" approved (EN 17092:2020) women's leather biker jacket comes fitted with Knox Microlock protectors in the elbows and shoulders as standard, with a pocket for an optional Knox back protector.
Manufactured from premium 1.3 mm Aniline Cowhide, finished with prestige quality zips and stainless steel fittings throughout, this jacket is soft to the touch, yet has been built to last, with the uncompromising quality of both materials and construction.
This is an understated and classic double-breasted style of ladies biker jacket, and noticeable detailing includes double-stitched diamond-quilted panels, and elasticated ribbing and side buckles for both comfort and fit.
Lined with champagne gold satin lining and a butter-soft ruby suede trim.
Available in sizes UK 6 to UK 16. If we don't have it in stock, contact us at info@strathmoto.com to inquire about placing a special order for you.
PRODUCT INFO
- CE "AAA" Approved Protective Garment to EN 17092:2020
- 1.3mm thickness Racing Green aniline cowhide leather
- CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
- Pocket for an optional CE Level 2 Knox Micro-lock back protector, which can be purchased separately here.
- Double stitched diamond quilting on the shoulders and lower back panel
- Elasticated ribbing side panels for comfort and fit
- Industrial grade hand-polished asymmetric zip with AERO pull
- Trademark Goldtop "Ladies" gold quilted lining
- 3 Zipped external pockets and
- 2 Interior chest pockets
- Adjustable cuffs with ball zips
- Stainless Steel adjustable waist buckles and collar snap
- Tan suede leather trim inside collar and black suede leather trim inside cuffs and zip guard
- Dropped back
The best way to determine your size, would be to go off the measurements that are given in the table below in centimetres (CM). These measurements have been taken with the jacket laid flat and are typically the most accurate to go off of. When comparing these measurements to an existing jacket that you own, please take into consideration the thickness of Goldtop leather and linings.
Please remember that this is only a guide! If in doubt, please go up a size.
To take your own measurements, first measure around your bust at the fullest part, then your waist around the natural waistline. Finally measure around your hips, typically 20cm below your natural waistline. Please take all measurements in inches.
MERLIN SHENSTONE COTEC AIR JACKET - BLACK
Regular price
$ 6,984.00
Merlin Shenstone Air Jacket
The Merlin Shenstone Air motorcycle jacket is part of our Tech Wax Heritage Collection, and has rider comfort at its core. Focused on providing superior airflow in warmer climates, Shenstone Air has mesh panelling front and back to drag in cool air to the body, making it a great option for a summer motorcycle jacket. If an unexpected rain shower should appear, the Reissa waterproof and breathable membrane can be easily zipped in. Shenstone Air is made from Cotec, a lightweight Merlin-exclusive waxed cotton developed in collaboration with Halley Stevensons®, which gives riders the wax cotton look minus the waxy handle. Pre-fitted with a suite of D3O® armour to the shoulders, elbows and back, this versatile waxed cotton motorcycle jacket is the perfect all-season option.
Materials
Exclusive Halley Stevensons® Collaborative Technical Wax Fabric - Cotec®
Ballistic Mesh Panels For High Levels Of Breathability and Cooling
Removable Reissa® Active Waterproof and Breathable Membrane
Fixed Mesh Lining
YKK® Zippers Used Throughout
Antique Hardware
Protection
D3O® Tri-vented LP1 CE EN1621 Level 1 Shoulder and Elbow Armour Pre-fitted (Removable)
D3O® Viper Large Back Protector Pre-fitted
CE EN17092 AA
Pockets
Two Chest Patch Pockets
Two Side Entry Pockets
Internal Storage Pockets
Features
Diamond Stitched Overlay Details
Adjustable Bicep, Cuff and Hem
Reflective Stripe To Rear Of Collar
Short YKK® Jacket To Trouser Connecting Zip
Euro Jacket To Jean Connector Hoop
Caring for your Shenstone Air jacket
To care for your wax cotton jacket, begin by lightly brushing off any dirt or soil, and use a cold damp cloth if necessary to wipe down the jacket. Clean it in this way regularly to maintain its appearance, but don’t be too harsh as the wax will be removed. You can re-wax the jacket when it loses its waxed finish and water begins to soak into the cotton rather than bead off. Please do not machine wash, tumble dry or use hot water on your jacket. Full care information can be found in our dedicated care guide: Merlin Wash & Care.
DMD RIVALE HELMET ECE 22.06 - MATTE BLACK
Regular price
$ 9,266.00
Meet the RIVALE, the latest addition to the DMD family. With such an essential design it’s easy to forget there’s real innovation and technology within. Thanks to the new tri compound fiber, DMD have achieved a super compact helmet with all the modern security standards and a comfortable fit. A full-face helmet that recalls the roaring years of Motorsport. Made in Italy, with passion.
Each helmet comes with a clear visor. Dark Smoke accessory visors can be purchased separately here.
TECHNICAL DETAILS
- Full-face helmet made of tri compound fiber (carbon-kevlar-fibreglass)
- Removable and washable liner
- Padded chin strap with Double D-ring closure
- ECE Homologation meets the new 22.06 standard
- PIN visor closure
- Two shell sizes
- Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
- Standard shell: L: 59/60 cm; XL: 61/62 cm
PRODUCT CARE
- Helmets are made of materials that can be damaged by many commonly available cleaners.
- Clean the helmet using a soft cloth or sponge, warm water and mild soap.
- When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
- Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
- Clean the removable liner by hand washing, then leave to air dry.
DMD RIVALE HELMET ECE 22.06 - RAZOR
Regular price
$ 10,833.00
Meet the RIVALE, the latest addition to the DMD family. With such an essential design it’s easy to forget there’s real innovation and technology within. Thanks to the new tri compound fiber, DMD have achieved a super compact helmet with all the modern security standards and a comfortable fit. A full-face helmet that recalls the roaring years of Motorsport. Made in Italy, with passion.
Each helmet comes with a clear visor. Dark Smoke accessory visors can be purchased separately here.
TECHNICAL DETAILS
- Full-face helmet made of tri compound fiber (carbon-kevlar-fibreglass)
- Removable and washable liner
- Padded chin strap with Double D-ring closure
- ECE Homologation meets the new 22.06 standard
- PIN visor closure
- Two shell sizes
- Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
- Standard shell: L: 59/60 cm; XL: 61/62 cm
PRODUCT CARE
- Helmets are made of materials that can be damaged by many commonly available cleaners.
- Clean the helmet using a soft cloth or sponge, warm water and mild soap.
- When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
- Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
- Clean the removable liner by hand washing, then leave to air dry.
DMD SEVENTYFIVE HELMET - MATTE BLACK
Regular price
$ 7,555.00
The SeventyFive is a tribute to the stylish icon of the 70’S. The helmet is a play on the design of the Racer model and the name comes from the year when the company was born. The helmet has slotted air vents to increase ventilation and it has 3 snaps to allow for fitment of DMD's snap-on visor. It has a space large enough to accommodate most goggles. This model is also compatible with DMD's new SeventyFive Goggle and with the DMD Ghost goggles.
TECHNICAL DETAILS
- Carbon kevlar shell
- Removable and washable liner
- Padded chin strap with Double D-ring closure
- ECE Homologation
- Two shell sizes
- Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
- Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm
PRODUCT CARE
- Helmets are made of materials that can be damaged by many commonly available cleaners.
- Clean the helmet using a soft cloth or sponge, warm water and mild soap.
- When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
- Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
- Clean the removable liner by hand washing then permit to air dry whenever possible to prevent heat damage.
DMD RETRO JET HELMET ECE 22.06 - RAINBOW
Regular price
$ 6,272.00
The jet Retro Rainbow helmet is simple yet striking thanks to the glitter finish that complements a monochrome silver base. The fit is comfortable and meets all modern safety requirements. Suitable for those who like simple lines and an essential design on their motorcycle.
KEY FEATURES
Simple but impressive: glitter gives a special note where simplicity meets perfection.
Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.
Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell
TECHNICAL DETAILS:
- Helmet weight: 900 gr +/- 50.
- Fiberglass Shell
- Removable and washable liner
- Three different shells for perfect fit and maximum compactness
- Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
- Shell 2: L - 58 cm
- Shell 3: XL - 59/60 cm; XXL - 61 cm
- Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
- Padded chin strap with Double D-ring closure
- ECE 22.06 Homologation
PRODUCT CARE
- The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
- Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
- To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.
DMD RETRO JET HELMET ECE 22.06 - RAINBOW GREEN
Regular price
$ 5,702.00
The jet Retro Rainbow Green helmet is simple yet striking thanks to the glitter finish that complements a monochrome green base. The fit is comfortable and meets all modern safety requirements. Suitable for those who like simple lines and an essential design on their motorcycle.
KEY FEATURES
Simple but impressive: glitter gives a special note where simplicity meets perfection.
Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.
Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell
TECHNICAL DETAILS:
- Helmet weight: 900 gr +/- 50.
- Fiberglass Shell
- Removable and washable liner
- Three different shells for perfect fit and maximum compactness
- Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
- Shell 2: L - 58 cm
- Shell 3: XL - 59/60 cm; XXL - 61 cm
- Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
- Padded chin strap with Double D-ring closure
- ECE 22.06 Homologation
PRODUCT CARE
- The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
- Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
- To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.
DMD RETRO JET HELMET ECE 22.06 - RAINBOW VIOLET
Regular price
$ 5,702.00
The jet Retro Rainbow Violet helmet is simple yet striking thanks to the glitter finish that complements a monochrome purple base. The fit is comfortable and meets all modern safety requirements. Suitable for those who like simple lines and an essential design on their motorcycle.
KEY FEATURES
Simple but impressive: glitter gives a special note where simplicity meets perfection.
Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.
Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell
TECHNICAL DETAILS:
- Helmet weight: 900 gr +/- 50.
- Fiberglass Shell
- Removable and washable liner
- Three different shells for perfect fit and maximum compactness
- Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
- Shell 2: L - 58 cm
- Shell 3: XL - 59/60 cm; XXL - 61 cm
- Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
- Padded chin strap with Double D-ring closure
- ECE 22.06 Homologation
PRODUCT CARE
- The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
- Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
- To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.
DMD RETRO JET HELMET ECE 22.06 - DEEP GREEN
Regular price
$ 4,704.00
The jet Retro Deep Green helmet is part of the single-color range and comes in a shiny green finish. Safe, comfortable, and compact in size, it fits perfectly on any type of motorcycle, be it Custom, Vintage, or Cafe Racer.
KEY FEATURES
Simple but impressive: glitter gives a special note where simplicity meets perfection.
Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.
Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell
TECHNICAL DETAILS:
- Helmet weight: 900 gr +/- 50.
- Fiberglass Shell
- Removable and washable liner
- Three different shells for perfect fit and maximum compactness
- Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
- Shell 2: L - 58 cm
- Shell 3: XL - 59/60 cm; XXL - 61 cm
- Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
- Padded chin strap with Double D-ring closure
- ECE 22.06 Homologation
PRODUCT CARE
- The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
- Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
- To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.
DMD SEVENTYFIVE HELMET - ORO COLLECTION - SYDNEY
Regular price
$ 8,268.00
The SeventyFive is a tribute to the stylish icon of the 70’S. The helmet is a play on the design of the Racer model and the name comes from the year when the company was born. The helmet has slotted air vents to increase ventilation and it has 3 snaps to allow for fitment of DMD's snap-on visor. It has a space large enough to accommodate most goggles. This model is also compatible with DMD's new SeventyFive Goggle and with the DMD Ghost goggles.
The Oro Collection takes the SeventyFive line up and kicks it up a few notches incorporating a carbon kevlar shell, Italian leather trim and an inner lining made of leather and Shalimar. It is the result of the perfect union of the best Italian leather and DMD craftsmen’s skilled hands.
TECHNICAL DETAILS
- Carbon kevlar shell
- Italian leather trim
- Inner lining made of leather and Shalimar, removable and washable.
- Padded chin strap with Double D-ring closure
- ECE Homologation
- Two shell sizes
- Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
- Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm
PRODUCT CARE
- Helmets are made of materials that can be damaged by many commonly available cleaners.
- Clean the helmet using a soft cloth or sponge, warm water and mild soap.
- When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
- Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
- Clean the removable liner by hand washing then permit to air dry whenever possible to prevent heat damage.
REV'IT! LIVENGOOD 2 GTX GLOVES
Regular price
$ 4,419.00
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Regular cuff, insulated, waterproof GORE-TEX gloves for cold-weather touring
-
GUARANTEED TO KEEP YOU DRY™ promise (GORE TEX)
-
Insulating / Keeps you warm
-
Regular-length cuff
Take on any tour with the Livengood 2 GTX gloves. With an arsenal of GORE-TEX grip waterproofing, insulation, and safety features, hands are not only shielded from the elements, but also against the unexpected happening along the way. Wet weather warrior Since we’ve included “GTX” nomenclature, that means these gloves have GORE-TEX included. Using the semi-bonded GORE-TEX grip construction, which not only means strong waterproofing but also less bulk and more tactility at the hands. Hands stay dry and comfortable. Happy hands The inclusion of 200 grams PrimaLoft® Gold at the back of the hand, along with 60 grams PrimaLoft® Gold Eco at the palm and between the fingers are a cold-fighting duo that are ready for their next challenge. The high-loft fur liner, combined with the push-full tri-fleece liner also work simultaneously to keep hands in great shape. Safety first Wrapping the trifecta of defining features up for the Livengood 2 GTX gloves is their safety component. Included is a hard-shell knuckle which is supported by Temperfoam® underneath for extra comfort and protection. Additionally, a TPU hard-shell palm slider is included. Their outer shell also includes tough yet flexible goat leather and suede and reinforced with PWR|Shell stretch.
Comfort features
-
Adjustability:
-
Adjustment strap at wrist
-
Adjustment tab at cuff
-
Stretch at cuff
-
Stretch at fingers
-
Stretch fabric on back of hand
-
Stretch lips at fingers
-
Stretch lips at upper hand
-
-
Closure:
-
Hook-and-loop closure
-
Wrist strap
-
-
Lining:
-
High loft fur liner
-
Push-Pull tri-fleece liner
-
-
Features:
-
conductive fingertip at index finger
-
conductive fingertip at thumb
-
Grip patch at palm
-
Grip patch at thumb
-
Pull tab
-
Regular cuff
-
Visor wiper
-
Climate features
-
Waterproofing:
-
GORE-TEX gloves + GORE Grip technology
-
-
Insulation:
-
PrimaLoft® Gold 200g
-
PrimaLoft® Gold Eco with Grip control 60g
-
Protection features
-
Protection:
-
Hard shell knuckle
-
PU injected finger knuckles
-
Temperfoam® palm slider
-
Temperfoam® thumb knuckle
-
Temperfoam® underneath knuckle protector
-
TPU hard shell palm slider
-
-
Outer shell material:
-
Flock PU
-
goatskin drum dyed with WR finish
-
Inside out goat suede
-
Leather Connect Finger Tip
-
PU (polyurethane) coated fabric
-
PWR|Shell stretch
-
Softshell 3L
-
-
Visibility:
-
laminated reflective logo at finger
-
CERTIFICATION
These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.
REV'IT! SAROS JACKET - BLACK-DARK GREEN
Regular price
$ 5,132.00
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Graphic-oriented softshell jacket for urban sport riders
Product description
What better way to express yourself than through bold, graphic prints on your riding jacket That’s exactly what the Saros WB was created for. The same jacket with three different illustrative print choices allows you to be your best (and protected self) out on the road. Tech fashion in practice The hooded Saros WB jacket is meant to look more like veritable streetwear rather than PPE. The 3L softshell contributes to this dynamic. That said, it’s totally ready to take on the road thanks to the inclusion of inner SEESMART elbow and shoulder protection, along with a CE AA classification. Furthermore, WB stands for wind barrier. While the jacket itself is windproof - not waterproof – the inner membrane does help to prevent water pickup. Three ways to express your style Each Saros WB jacket comes with the same safety features but a different look to them. And instead of just changing up the colors, we offer them three different prints. There’s the non-traditional camo green variation, a tonal mélange grey, and one that has names of various places famous racetracks are in.
Comfort features
Pockets:
Inner pocket
Two stash pockets at front
Lining:
3D mesh
Mesh
Features:
Adjustment drawcord at hood
Button fixation for hood
Fixed hood
Jeans loop
Knitted cuff
Short connection zipper
Climate features
Insulation:
WindBarrier®
Wind catcher behind front zipper
Protection features
Protection:
Prepared for SEESOFT CE-level 2 Insert Back Protector
Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
SEESMART CE-level 1 Elbow Protectors
SEESMART CE-level 1 Shoulder Protectors
Thumb loops
Outer shell material:
Softshell 3L
Visibility:
Laminated reflection at front
Laminated reflection on hood
Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.
AGE OF GLORY CABIN VEST - BLACK
Regular price
$ 3,564.00
Cabin Vest Black
The Cabin vest was inspired by workwear garments and made in a durable and comfortable fabric, much like the popular Age of Glory Craftsman jacket. It can be worn over a t-shirt or over a jacket, whatever your preference. There are also suede details and a multitude of pockets, including a large one on the back. We think it's the perfect vest: combining style, comfort and utility.
- 14oz fabric
- Suede leather details
- Satin lining
- 2 inside pockets
- Large outside pocket on the back
- Colour: Black
Measuring Tips to Assure The Best Fit
Chest
With arms at your sides, place a tape measure under your arms and run it around the fullest part of your chest and across the shoulder blades.
Don't forget to consider that you may wish to wear your vest over a tee-shirt or sweatshirt/pullover, or a jacket so leave enough room to accommodate however you plan to wear it. Measures may vary up to 5%.
All measurements below are taken in centimeters (cm).
| Size | Height (cm) | Chest (cm) |
| S | 166-171 | 90-96 |
| M | 170-175 | 97-103 |
| L | 176-181 | 104-110 |
| XL | 180-185 | 111-117 |
| XXL | 184-189 | 116-121 |
AGE OF GLORY CABIN VEST - CARAMEL
Regular price
$ 3,564.00
Cabin Vest Caramel
The Cabin vest was inspired by workwear garments and made in a durable and comfortable fabric, much like the popular Age of Glory Craftsman jacket. It can be worn over a t-shirt or over a jacket, whatever your preference. There are also suede details and a multitude of pockets, including a large one on the back. We think it's the perfect vest: combining style, comfort and utility.
- 14oz fabric
- Suede leather details
- Satin lining
- 2 inside pockets
- Large outside pocket on the back
- Colour: Caramel
Measuring Tips to Assure The Best Fit
Chest
With arms at your sides, place a tape measure under your arms and run it around the fullest part of your chest and across the shoulder blades.
Don't forget to consider that you may wish to wear your vest over a tee-shirt or sweatshirt/pullover, or a jacket so leave enough room to accommodate however you plan to wear it. Measures may vary up to 5%.
All measurements below are taken in centimeters (cm).
| Size | Height (cm) | Chest (cm) |
| S | 166-171 | 90-96 |
| M | 170-175 | 97-103 |
| L | 176-181 | 104-110 |
| XL | 180-185 | 111-117 |
| XXL | 184-189 | 116-121 |
DMD SEVENTYFIVE HELMET - ORO COLLECTION - MADRID - SIZE S, M
Regular price
$ 8,268.00
The SeventyFive is a tribute to the stylish icon of the 70’S. The helmet is a play on the design of the Racer model and the name comes from the year when the company was born. The helmet has slotted air vents to increase ventilation and it has 3 snaps to allow for fitment of DMD's snap-on visor. It has a space large enough to accommodate most goggles. This model is also compatible with DMD's new SeventyFive Goggle and with the DMD Ghost goggles.
The Oro Collection takes the SeventyFive line up and kicks it up a few notches incorporating a carbon kevlar shell, Italian leather trim and an inner lining made of leather and Shalimar. It is the result of the perfect union of the best Italian leather and DMD craftsmen’s skilled hands.
TECHNICAL DETAILS
- Carbon kevlar shell
- Italian leather trim
- Inner lining made of leather and Shalimar, removable and washable.
- Padded chin strap with Double D-ring closure
- ECE Homologation
- Two shell sizes
- Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
- Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm
PRODUCT CARE
- Helmets are made of materials that can be damaged by many commonly available cleaners.
- Clean the helmet using a soft cloth or sponge, warm water and mild soap.
- When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
- Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
- Clean the removable liner by hand washing then permit to air dry whenever possible to prevent heat damage.
REV'IT! KRYPTONITE 3 GTX GLOVES
Regular price
$ 2,994.00
The REV’IT! Kryptonite 3 GTX gloves truly are bad weather’s, well, Kryptonite. When colder temperatures and rainy conditions try to keep you from your two-wheeled urban adventures, these gloves will keep your hands warm, dry, and comfortable. Water be gone Using the selectively bonded GORE-TEX grip construction, tactility is improved through the fingertips, and water is kept out. That said, hands can still breathe easy and let the moisture escape when you’re working hard at navigating the city streets. Just because it’s cold outside, doesn’t mean you have to be. And when temperatures are on the cooler side, the inclusion of 100 grams of 3M™ Thinsulate™ at the top of the hand helps keep the cold at bay. Functionality and features When the rain is relentless it’s likely you need more functionality from your gloves. We answered that call. And speaking of calls, if you need to answer them or use any functions on your touchscreen, we’ve included the Connect Finger Tip at not only the index finger, but also at the thumb. And with a visor wiper that now has a larger surface on the pointer finger, along with more reflection than ever before on the Kryptonite 3 GTX, these gloves have both functionality and useful features to help you effortlessly navigate life on two wheels in the city. Safety in the seams A new hard shell PVC knuckle shape has been created for this model, and the additional of a hard protector at the little finger only adds to the impressive safety resumé. Furthermore, you’ll find a TPU palm slider on the short-cuffed Kryptonite 3 GTX gloves.
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Short-cuffed, GORE-TEX, waterproof and warm commuting gloves for cold weather
-
Insulating / Keeps you warm
-
Provides great grip/feel on the handlebars
-
100% waterproof
Comfort features
-
Adjustability:
-
Adjustment tab at cuff
-
Stretch at cuff
-
Stretch at fingers
-
Stretch at thumb
-
Stretch fabric on back of hand
-
Stretch lips at fingers
-
-
Closure:
-
Hook-and-loop closure
-
-
Lining:
-
High loft fur liner
-
Push-Pull tri-fleece liner
-
-
Features:
-
conductive fingertip at index finger
-
conductive fingertip at thumb
-
Grip patch at palm
-
Grip patch at thumb
-
insulation only at backhand
-
Pull tab
-
Short cuff
-
Visor wiper
-
Climate features
-
Waterproofing:
-
GORE-TEX gloves + GORE Grip technology
-
-
Insulation:
-
3M™ Thinsulate™ G 100g
-
Protection features
-
Protection:
-
Hard shell knuckle
-
Temperfoam® at little finger
-
Temperfoam® finger knuckles
-
Temperfoam® palm slider
-
Temperfoam® underneath knuckle protector
-
TPR finger knuckles
-
TPU hard shell little finger protector
-
TPU hard shell palm slider
-
-
Outer shell material:
-
goatskin drum dyed with WR finish
-
Inside out goat suede
-
Leather Connect Finger Tip
-
PU (polyurethane) coated fabric
-
PWR|Shell 500D stretch
-
Softshell 3L
-
-
Visibility:
-
laminated reflection at back hand
-
Laminated reflective logo at backhand
-
Laminated reflective logo at finger
-
CERTIFICATION
These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.
REV'IT! ROSIER LADIES JACKET - BLACK
Regular price
$ 6,700.00
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Minimalist-chic, upscale urban commuting jacket for the fashionable female rider
-
Keeps you dry
-
Fashionable
-
Female fit
Urban commuting takes on face with the Rosier H2O Ladies jacket. Functional and chic PPE for the fashionable rider in the rain or shine. She’s got the look The rich hues of the neutral color palette of the Rosier H2O Ladies reflect its subtle but strong road presence. This minimalist-chic yet high-end commuter jacket has a sculpted silhouette that hits just above the hips and contours nicely to the body. Since we used stretch material (more on that in a moment) we were able to make the fit sit closer to the body, helping to prevent any unwanted cold air going where it’s not supposed to. The trifecta Comfort. Warmth. Waterproofing. Those were the main goals for the Rosier H2O Ladies. Comfort coming from the polyester twill stretch 3L outer shell material for additional freedom of movement when on two wheels or walking around town. Warmth through a detachable thermal liner that has a sleek, shiny finish. And waterproofing through the hydratex 3L construction. Functional features Keep your cards close by thanks to a zippered card holder pocket on the left sleeve, taking away the need to reach into your bag or backpack to pull out your form of payment. You’ll also find two large waterproof pockets at the side waist, an inner collar with a soft fleece liner, a rain catcher behind the front zipper, and reflect at the upper back to be more visible in low-lighting situations.
Comfort features
-
Adjustability:
-
Adjustment drawcord at hem
-
Adjustment tab at cuffs
-
-
Pockets:
-
Sleeve pocket
-
Three inner pockets
-
Two slit pockets at waist
-
-
Lining:
-
Mesh
-
-
Features:
-
Comfort collar
-
Double front zipper
-
Jeans loop
-
Short connection zipper
-
Soft edge at collar
-
Climate features
-
Waterproofing:
-
hydratex|3L
-
-
Insulation:
-
Detachable thermal liner
-
Protection features
-
Protection:
-
3D mesh protector pockets
-
Prepared for SEESOFT CE-level 2 Insert Back Protector
-
SEESMART CE-level 1 Elbow Protectors
-
SEESMART CE-level 1 Shoulder Protectors
-
-
Outer shell material:
-
polyester twill stretch 3L
-
-
Visibility:
-
Laminated reflection on back
-
CERTIFICATION
This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating
Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.
REV'IT! SURFACE JACKET - BROWN
Regular price
$ 7,555.00
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
-
Full-stretch, AA safety rated, DIRT Series, off-road jacket
-
Lightweight
-
Fully made of stretch material
-
Thumb loops at the cuffs
-
Adding to an already strong arsenal of off-road motorcycle outdoor lifestyle products in our DIRT Series collection, we bring you the Surface jacket. Stretch and safety for days, the impetus behind its creation was to engineer a jacket with as much stretch as possible using an open-knit construction, in this case, PWR|Stretch, to maximize comfort when moving around. CORDURA® ripstop was then added to reinforce its structural stability, along with the inclusion of SEESMART armor at the elbows and shoulders (with the possibility to add the back protector if desired) to give it a AA safety rating. One with nature: When searching for your next adventure in the heart of nature, know that what has come before has been used again. The parts that are lined on the inside of the Surface jacket has been made with recycled polyester. Roam free, explore more, and enjoy every moment.
Comfort features
-
Adjustability:
-
Adjustment drawcord at hem
-
-
Pockets:
-
Chest pocket
-
Inner pocket
-
Slit pocket at back
-
Two slit pockets at waist
-
-
Features:
-
Full stretch
-
Stretchable cuff
-
Thumb loop
-
Climate features
-
Ventilation:
-
Perforation on upper front
-
Protection features
-
Protection:
-
Prepared for SEESOFT CE-level 2 Insert Back Protector
-
SEESMART CE-level 1 Elbow Protectors
-
SEESMART CE-level 1 Shoulder Protectors
-
Thumb loops
-
-
Outer shell material:
-
CORDURA® 750D ripstop
-
PWR|Shell breathable stretch
-
-
Visibility:
-
Laminated reflection at collar
-
Laminated reflection at upper arms
-
Laminated reflection on back
-
CERTIFICATION
This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.
Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.
REV'IT! FLARE 3 JACKET - CAMO-DARK GREY
Regular price
$ 6,130.00
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Waterproof, sport-oriented hooded jacket with camo print
-
Keeps you dry
-
Fashionable
-
Casual looks
A modern vibe mixed with the latest tech specs, waterproofing, and a detachable hood? Sounds good to us. Of course, we’re talking about the Flare 3 H2O jacket. The next-gen of top-selling Urban Sport motorcycle-ready streetwear. Modern aesthetics. Functional design. Look at the lines of the Flare 3 H2O jacket. Now take a closer look. Hidden in plain sight amongst the backdrop of a modernized camo print, we’ve cleverly worked coated ventilation zippers into the design lines from the collarbone along the chest. The adjustment tab along the upper arm also follows the flow of the seams for a more tailored look. Hook-and-loop adjustments at the writs and waist make sure you get the perfect fit every time. Shielded against the elements Equipped with a hydratex|G-liner waterproofing construction to keep the water out and a detachable thermal liner to keep the heat in, the Flare 3 H2O means business in colder wet weather. And when you’re walking around in need of more protection against the rain, put the hood up. Not raining and you’re about to go riding? Either snap the hood down around back or unzip it and tuck it away for another time. Road and rider friendly You’re covered in terms of the weather, and you’re also covered in case of the unpredictable. SEESMART armor can be found at the elbows and shoulders, and the option to add the SEESOFT back protector is built in. Furthermore, making sure we can take what’s come before and make something new of it, the outer shell, thermal liner, and inner lining are made with recycled polyester.
Comfort features
Adjustability:
- Adjustment strap at waist
- Adjustment tab at cuffs
- Adjustment tab at upper arm
Pockets:
- Inner pocket within thermal liner
- Two slit pockets on front
- Waterproof inner pocket
Features:
Adjustment drawcord at hood
Button fixation for hood
Detachable hood
Drain eyelets at hood
Jeans loop
Short connection zipper
Climate features
Waterproofing: hydratex|G-liner
Insulation: Detachable thermal liner
Ventilation: Air outlet on upper back
Zippers on chest
Protection features
Protection: 3D mesh protector pockets
- Prepared for SEESOFT CE-level 2 Insert Back Protector
- SEESMART CE-level 1 Elbow Protectors
- SEESMART CE-level 1 Shoulder Protectors
Outer shell material: High density polyester 600D
Visibility: Laminated reflective logo on back
CERTIFICATION
This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.
Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.
REV'IT! FLARE 3 JACKET - CAMO-DARK GREEN
Regular price
$ 6,130.00
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Waterproof, sport-oriented hooded jacket with camo print
-
Keeps you dry
-
Fashionable
-
Casual looks
A modern vibe mixed with the latest tech specs, waterproofing, and a detachable hood? Sounds good to us. Of course, we’re talking about the Flare 3 H2O jacket. The next-gen of top-selling Urban Sport motorcycle-ready streetwear. Modern aesthetics. Functional design. Look at the lines of the Flare 3 H2O jacket. Now take a closer look. Hidden in plain sight amongst the backdrop of a modernized camo print, we’ve cleverly worked coated ventilation zippers into the design lines from the collarbone along the chest. The adjustment tab along the upper arm also follows the flow of the seams for a more tailored look. Hook-and-loop adjustments at the writs and waist make sure you get the perfect fit every time. Shielded against the elements Equipped with a hydratex|G-liner waterproofing construction to keep the water out and a detachable thermal liner to keep the heat in, the Flare 3 H2O means business in colder wet weather. And when you’re walking around in need of more protection against the rain, put the hood up. Not raining and you’re about to go riding? Either snap the hood down around back or unzip it and tuck it away for another time. Road and rider friendly You’re covered in terms of the weather, and you’re also covered in case of the unpredictable. SEESMART armor can be found at the elbows and shoulders, and the option to add the SEESOFT back protector is built in. Furthermore, making sure we can take what’s come before and make something new of it, the outer shell, thermal liner, and inner lining are made with recycled polyester.
Comfort features
Adjustability:
- Adjustment strap at waist
- Adjustment tab at cuffs
- Adjustment tab at upper arm
Pockets:
- Inner pocket within thermal liner
- Two slit pockets on front
- Waterproof inner pocket
Features:
Adjustment drawcord at hood
Button fixation for hood
Detachable hood
Drain eyelets at hood
Jeans loop
Short connection zipper
Climate features
Waterproofing: hydratex|G-liner
Insulation: Detachable thermal liner
Ventilation:
- Air outlet on upper back
- Zippers on chest
Protection features
Protection:
- 3D mesh protector pockets
- Prepared for SEESOFT CE-level 2 Insert Back Protector
- SEESMART CE-level 1 Elbow Protectors
- SEESMART CE-level 1 Shoulder Protectors
Outer shell material: High density polyester 600D
Visibility: Laminated reflective logo on back
CERTIFICATION
This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.
Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.
BILTWELL GRINGO ECE 22.06 HELMET - SANTA CRUZ COLLAB
Regular price
$ 6,414.00
Santa Cruz Skateboards is one of those brands we have looked up to since Biltwell’s founding in 2006. Their mission statement sums it up perfectly “To inspire fans of skateboarding and art by drawing from our past, in the present, for the future…” Created in 1985 by Jim Phillips, the Screaming Hand is one of the most recognizable skate logos of all time and we thought it was the perfect fit for a collaboration on this limited edition Gringo helmet.
The Gringo has been a top choice among modern motorbike riders since we introduced it a decade ago. The latest iteration of our classic full-face helmet now meets the European Union’s more robust ECE R22.06 safety standards to provide a higher level of rider protection.
Technical Details
- Exclusive Biltwell + Santa Cruz Skateboards box complete with Screaming Hand graphic
- Injection-molded ABS outer shell is lightweight and highly resistant to impacts
- New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
- Molded urethane chin bar pad dissipates energy during front impact
- Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
- Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
- New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
- Molded EPS ear pockets fit select aftermarket audio accessories
- US DOT FMVSS No. 218 compliant / ECE R22.06 certified
Helmet Fitment
Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. To meet Europe's new, more robust standards for impact attenuation and rider safety, ECE R22.06-certified helmets may fit you more snugly than similar US DOT-compliant models.
NOTE: Biltwell offers accessory cheek pads so you can fine-tune the comfort of your helmet against your cheeks and face for a perfect fit.
REV'IT! ARBOR H20 JACKET
Regular price
$ 8,268.00
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
-
Waist-length, waterproof, warm jacket for the urban commuter
-
Keeps you dry
-
Minimalistic design
-
Navigate the bustling city streets in style with the Arbor H2O jacket, a culmination of practical design and contemporary aesthetics. In the details Its shorter length, hitting perfectly at the waist, blends urban chic with exceptional functionality. The Arbor H2O is equipped with 3L hydratex waterproofing, ensuring you stay dry even on the rainiest days, while the drawcord waist provides a tailored fit for ultimate comfort. Stay organized and visible Featuring three waterproof pockets – two with zippers at the waist and one on the chest – this jacket offers ample storage space for your urban essentials. The card holder on the left sleeve keeps your commuter card or identification easily accessible. For your comfort, all inner collars are lined with fleece, making your daily commute an indulgent experience. Safety and style combined Safety is paramount, and this jacket meets those high standards with its AA rating with incorporated SEESMART protectors at the shoulders and elbows. The reflective detailing on the front and back enhances visibility during low-light conditions, ensuring you stand out in the urban landscape. Embrace minimalistic chic with the front zipper and fashion-inspired, heavy-duty snap button closures. With a detachable thermal liner, this urban commuter jacket adapts to varying temperatures, making it your year-round companion in the city. Make your daily commute a stylish and comfortable journey with this exceptional urban commuter jacket.
Comfort features
-
Adjustability:
-
Adjustment drawcord at hem
-
Adjustment tab at cuffs
-
-
Pockets:
-
Chest pocket
-
Sleeve pocket
-
Three inner pockets
-
Two slit pockets at waist
-
-
Lining:
-
Mesh
-
-
Features:
-
Comfort collar
-
Jeans loop
-
Short connection zipper
-
Soft edge at collar
-
Zipper and button-closure front
-
Climate features
-
Waterproofing:
-
hydratex|3L
-
-
Insulation:
-
Detachable thermal liner
-
Protection features
-
Protection:
-
3D mesh protector pockets
-
Prepared for SEESOFT CE-level 2 Insert Back Protector
-
SEESMART CE-level 1 Elbow Protectors
-
SEESMART CE-level 1 Shoulder Protectors
-
-
Outer shell material:
-
polyester twill stretch 3L
-
-
Visibility:
-
Laminated reflection at front
-
Laminated reflection on back
-
CERTIFICATION
This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating
Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.
